kamillo1888 Posted May 3, 2011 Share Posted May 3, 2011 Hello, I've tried to install S3 and 10.6.6i by Hazard in my Vaio but I can't run USB and laptop keyboard and touchpad, so I can't change any more in system. This is my new notebook, previously I had HP 6270s and I havn't any probems with that. My dmesg says: [ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=85334c20-3eac-4ca6-a8ee-cd9881bf7d04 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee7c000 (usable) [ 0.000000] BIOS-e820: 00000000dee7c000 - 00000000deebc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved) [ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved) [ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved) [ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved) [ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved) [ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved) [ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Sony Corporation VPCEC3M1E/VAIO, BIOS R1100Y8 08/17/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 118000000 mask FF8000000 uncachable [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdee7c max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dee7c000 [ 0.000000] 0000000000 - 00dee00000 page 2M [ 0.000000] 00dee00000 - 00dee7c000 page 4k [ 0.000000] kernel direct mapping tables up to dee7c000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000 [ 0.000000] 0100000000 - 0118000000 page 2M [ 0.000000] kernel direct mapping tables up to 118000000 @ dee76000-dee7c000 [ 0.000000] RAMDISK: 35b6c000 - 36dae000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony) [ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100817 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100817 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110112/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110112/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000deecd018 0AE05 (v01 Sony VAIO 20100817 INTL 20051117) [ 0.000000] ACPI: FACS 00000000def2df40 00040 [ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100817 MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100817 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100817 MSFT 00000003) [ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100817 Sony 01000000) [ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100817 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100817 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000118000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000 [ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff] [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880114000000-ffff8801177fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00118000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000dee7c [ 0.000000] 0: 0x00100000 -> 0x00118000 [ 0.000000] On node 0 totalpages: 1011210 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 894644 pages, LIFO batch:31 [ 0.000000] Normal zone: 1344 pages used for memmap [ 0.000000] Normal zone: 96960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dee7c000 - 00000000deebc000 [ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000 [ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000 [ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000 [ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000 [ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000 [ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000 [ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000 [ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000 [ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000 [ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000 [ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000 [ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000 [ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000 [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800dec00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995524 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=85334c20-3eac-4ca6-a8ee-cd9881bf7d04 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3888408k/4587520k available (5940k kernel code, 542680k absent, 156432k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2526.682 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.36 BogoMIPS (lpj=25266820) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000040] AppArmor: AppArmor initialized [ 0.000041] Yama: becoming mindful. [ 0.000369] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001724] Mount-cache hash table entries: 256 [ 0.001832] Initializing cgroup subsys ns [ 0.001835] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.001837] Initializing cgroup subsys cpuacct [ 0.001841] Initializing cgroup subsys memory [ 0.001847] Initializing cgroup subsys devices [ 0.001849] Initializing cgroup subsys freezer [ 0.001850] Initializing cgroup subsys net_cls [ 0.001852] Initializing cgroup subsys blkio [ 0.001878] CPU: Physical Processor ID: 0 [ 0.001879] CPU: Processor Core ID: 0 [ 0.001884] mce: CPU supports 9 MCE banks [ 0.001892] CPU0: Thermal monitoring handled by SMI [ 0.001899] using mwait in idle threads. [ 0.003795] ACPI: Core revision 20110112 [ 0.024962] ftrace: allocating 24314 entries in 96 pages [ 0.031908] Setting APIC routing to flat [ 0.032221] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.132160] CPU0: Intel® Core i5 CPU M 460 @ 2.53GHz stepping 05 [ 0.243099] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.243105] ... version: 3 [ 0.243106] ... bit width: 48 [ 0.243107] ... generic registers: 4 [ 0.243108] ... value mask: 0000ffffffffffff [ 0.243109] ... max period: 000000007fffffff [ 0.243110] ... fixed-purpose events: 3 [ 0.243111] ... event mask: 000000070000000f [ 0.243524] Booting Node 0, Processors #1 [ 0.403029] CPU1: Thermal monitoring handled by SMI [ 0.423183] #2 [ 0.582929] CPU2: Thermal monitoring handled by SMI [ 0.603109] #3 [ 0.762826] CPU3: Thermal monitoring handled by SMI [ 0.782885] Brought up 4 CPUs [ 0.782887] Total of 4 processors activated (20215.29 BogoMIPS). [ 0.784638] devtmpfs: initialized [ 0.785469] print_constraints: dummy: [ 0.785497] Time: 11:45:34 Date: 05/03/11 [ 0.785526] NET: Registered protocol family 16 [ 0.785618] Trying to unpack rootfs image as initramfs... [ 0.785620] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.785622] ACPI: bus type pci registered [ 0.785682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.785685] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.795187] PCI: Using configuration type 1 for base access [ 0.795843] bio: create slab <bio-0> at 0 [ 0.797524] ACPI: EC: Look up EC in DSDT [ 0.882904] ACPI: Executed 2 blocks of module-level executable AML code [ 0.962772] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.963154] ACPI: SSDT 00000000def1a918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.963532] ACPI: Dynamic OEM Table Load: [ 0.963534] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.963656] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.964010] ACPI: Dynamic OEM Table Load: [ 0.964012] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.068067] Freeing initrd memory: 18696k freed [ 1.082955] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.083384] ACPI: Dynamic OEM Table Load: [ 1.083387] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.122766] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.123153] ACPI: Dynamic OEM Table Load: [ 1.123155] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.552532] ACPI: Interpreter enabled [ 1.552536] ACPI: (supports S0 S3 S4 S5) [ 1.552557] ACPI: Using IOAPIC for interrupt routing [ 1.593812] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 1.622561] ACPI: No dock devices found. [ 1.622563] HEST: Table not found. [ 1.622565] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.622855] \_SB_.PCI0:_OSC invalid UUID [ 1.622856] _OSC request data:1 8 1f [ 1.622859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.623318] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.623321] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.623322] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.623324] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 1.623326] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 1.623327] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 1.623329] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 1.623331] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 1.623332] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 1.623334] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] [ 1.623346] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 1.623363] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 1.623379] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 [ 1.623402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.623405] pci 0000:00:01.0: PME# disabled [ 1.623451] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 1.623479] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit] [ 1.623553] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.623558] pci 0000:00:16.0: PME# disabled [ 1.623598] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 1.623622] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff] [ 1.623707] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.623711] pci 0000:00:1a.0: PME# disabled [ 1.623740] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 1.623760] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit] [ 1.623835] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.623840] pci 0000:00:1b.0: PME# disabled [ 1.623865] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 1.623941] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.623946] pci 0000:00:1c.0: PME# disabled [ 1.623973] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 1.624048] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.624052] pci 0000:00:1c.1: PME# disabled [ 1.624080] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 [ 1.624156] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.624160] pci 0000:00:1c.2: PME# disabled [ 1.624190] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604 [ 1.624267] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.624272] pci 0000:00:1c.5: PME# disabled [ 1.624307] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 1.624331] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff] [ 1.624416] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.624420] pci 0000:00:1d.0: PME# disabled [ 1.624444] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.624518] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 [ 1.624636] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 [ 1.624662] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077] [ 1.624672] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063] [ 1.624683] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057] [ 1.624694] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043] [ 1.624705] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f] [ 1.624715] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff] [ 1.624761] pci 0000:00:1f.2: PME# supported from D3hot [ 1.624766] pci 0000:00:1f.2: PME# disabled [ 1.624787] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 1.624808] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit] [ 1.624837] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f] [ 1.624882] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 [ 1.624908] pci 0000:00:1f.6: reg 10: [mem 0xf5e04000-0xf5e04fff 64bit] [ 1.625017] pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300 [ 1.625030] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.625039] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit] [ 1.625046] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] [ 1.625058] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref] [ 1.625075] pci 0000:01:00.0: supports D1 D2 [ 1.625095] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403 [ 1.625108] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit] [ 1.625151] pci 0000:01:00.1: supports D1 D2 [ 1.625171] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.625173] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.625175] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff] [ 1.625179] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.625250] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280 [ 1.625272] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit] [ 1.625355] pci 0000:02:00.0: supports D1 [ 1.625356] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 1.625360] pci 0000:02:00.0: PME# disabled [ 1.625391] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.625396] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 1.625400] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff] [ 1.625407] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.625515] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805 [ 1.625538] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff] [ 1.625671] pci 0000:03:00.0: supports D1 D2 [ 1.625673] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.625679] pci 0000:03:00.0: PME# disabled [ 1.625729] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880 [ 1.625751] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff] [ 1.625884] pci 0000:03:00.1: supports D1 D2 [ 1.625885] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.625891] pci 0000:03:00.1: PME# disabled [ 1.625940] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805 [ 1.625962] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff] [ 1.626095] pci 0000:03:00.4: supports D1 D2 [ 1.626096] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.626102] pci 0000:03:00.4: PME# disabled [ 1.626167] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.626172] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 1.626176] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff] [ 1.626183] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.626463] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200 [ 1.626679] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit] [ 1.626790] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff] [ 1.627219] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref] [ 1.627542] pci 0000:04:00.0: supports D1 D2 [ 1.627543] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.627580] pci 0000:04:00.0: PME# disabled [ 1.627837] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 1.627841] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff] [ 1.627845] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff] [ 1.627852] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.627907] pci 0000:00:1c.5: PCI bridge to [bus 05-0c] [ 1.627911] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff] [ 1.627915] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff] [ 1.627922] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.627995] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode) [ 1.628000] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.628004] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.628012] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.628014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.628015] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.628021] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.628022] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 1.628024] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.628026] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.628027] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 1.628029] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 1.628031] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 1.628033] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 1.628065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.628200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.628249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 1.628302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.628364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.628409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 1.628514] \_SB_.PCI0:_OSC invalid UUID [ 1.628515] _OSC request data:1 19 1f [ 1.632288] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) [ 1.632353] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600 [ 1.632370] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600 [ 1.632389] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600 [ 1.632404] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600 [ 1.632418] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600 [ 1.632434] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600 [ 1.632657] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.632699] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.632738] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15) [ 1.632777] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 1.632815] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.632854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.632892] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 1.632930] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.633025] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.633030] vgaarb: loaded [ 1.633162] SCSI subsystem initialized [ 1.633213] libata version 3.00 loaded. [ 1.633251] usbcore: registered new interface driver usbfs [ 1.633258] usbcore: registered new interface driver hub [ 1.633279] usbcore: registered new device driver usb [ 1.633358] wmi: Mapper loaded [ 1.633359] PCI: Using ACPI for IRQ routing [ 1.633361] PCI: pci_cache_line_size set to 64 bytes [ 1.633456] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 1.633458] reserve RAM buffer: 00000000dee7c000 - 00000000dfffffff [ 1.633541] NetLabel: Initializing [ 1.633542] NetLabel: domain hash size = 128 [ 1.633543] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.633555] NetLabel: unlabeled traffic allowed by default [ 1.633591] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.633595] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.635613] Switching to clocksource hpet [ 1.640535] AppArmor: AppArmor Filesystem Enabled [ 1.640565] pnp: PnP ACPI init [ 1.640582] ACPI: bus type pnp registered [ 1.640859] pnp 00:00: [bus 00-3e] [ 1.640861] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.640863] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.640864] pnp 00:00: [io 0x0d00-0xffff window] [ 1.640866] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.640867] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.640869] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.640870] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.640872] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.640873] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.640875] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.640876] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.640878] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.640879] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.640881] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.640882] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.640884] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.640885] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.640887] pnp 00:00: [mem 0xe0000000-0xfeafffff window] [ 1.640983] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.640996] pnp 00:01: [io 0x0000-0x001f] [ 1.640997] pnp 00:01: [io 0x0081-0x0091] [ 1.640998] pnp 00:01: [io 0x0093-0x009f] [ 1.641000] pnp 00:01: [io 0x00c0-0x00df] [ 1.641002] pnp 00:01: [dma 4] [ 1.641021] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.641028] pnp 00:02: [mem 0xff000000-0xffffffff] [ 1.641044] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.641111] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.641130] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.641138] pnp 00:04: [io 0x00f0] [ 1.641150] pnp 00:04: [irq 13] [ 1.641169] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.641177] pnp 00:05: [io 0x002e-0x002f] [ 1.641178] pnp 00:05: [io 0x004e-0x004f] [ 1.641180] pnp 00:05: [io 0x0061] [ 1.641181] pnp 00:05: [io 0x0063] [ 1.641182] pnp 00:05: [io 0x0065] [ 1.641183] pnp 00:05: [io 0x0067] [ 1.641184] pnp 00:05: [io 0x0070] [ 1.641186] pnp 00:05: [io 0x0080] [ 1.641187] pnp 00:05: [io 0x0092] [ 1.641188] pnp 00:05: [io 0x00b2-0x00b3] [ 1.641189] pnp 00:05: [io 0x0680-0x069f] [ 1.641191] pnp 00:05: [io 0xff00-0xff0f] [ 1.641193] pnp 00:05: [io 0xff10-0xff13] [ 1.641194] pnp 00:05: [io 0x0800-0x0803] [ 1.641196] pnp 00:05: [io 0x0400-0x047f] [ 1.641197] pnp 00:05: [io 0x0500-0x057f] [ 1.641198] pnp 00:05: [io 0x164e-0x164f] [ 1.641255] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.641257] system 00:05: [io 0xff00-0xff0f] has been reserved [ 1.641259] system 00:05: [io 0xff10-0xff13] has been reserved [ 1.641261] system 00:05: [io 0x0800-0x0803] has been reserved [ 1.641262] system 00:05: [io 0x0400-0x047f] has been reserved [ 1.641264] system 00:05: [io 0x0500-0x057f] has been reserved [ 1.641266] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.641268] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.641275] pnp 00:06: [io 0x0070-0x0077] [ 1.641280] pnp 00:06: [irq 8] [ 1.641302] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.641310] pnp 00:07: [io 0x0060] [ 1.641311] pnp 00:07: [io 0x0064] [ 1.641316] pnp 00:07: [irq 1] [ 1.641333] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.641343] pnp 00:08: [irq 12] [ 1.641384] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.641700] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 1.641701] pnp 00:09: [mem 0xfed10000-0xfed13fff] [ 1.641703] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 1.641704] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 1.641706] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 1.641707] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 1.641709] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled] [ 1.641710] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 1.641711] pnp 00:09: [mem 0xff000000-0xffffffff] [ 1.641713] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 1.641714] pnp 00:09: [mem 0xf7fff000-0xf7ffffff] [ 1.641774] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.641776] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.641777] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.641779] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.641781] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.641783] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.641785] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.641787] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 1.641789] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.641791] system 00:09: [mem 0xf7fff000-0xf7ffffff] has been reserved [ 1.641793] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.641920] pnp 00:0a: [bus 3f] [ 1.641964] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.642332] Switched to NOHz mode on CPU #0 [ 1.642404] Switched to NOHz mode on CPU #3 [ 1.642419] Switched to NOHz mode on CPU #1 [ 1.642436] Switched to NOHz mode on CPU #2 [ 1.656258] pnp: PnP ACPI: found 11 devices [ 1.656260] ACPI: ACPI bus type pnp unregistered [ 1.662090] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref] [ 1.662095] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref] [ 1.662099] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref] [ 1.662103] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref] [ 1.662105] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.662107] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.662110] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff] [ 1.662112] pci 0000:00:01.0: bridge window [mem pref disabled] [ 1.662115] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.662118] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 1.662124] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff] [ 1.662129] pci 0000:00:1c.0: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref] [ 1.662135] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.662137] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 1.662143] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff] [ 1.662148] pci 0000:00:1c.1: bridge window [mem 0xf6100000-0xf62fffff 64bit pref] [ 1.662155] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 1.662158] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff] [ 1.662164] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff] [ 1.662168] pci 0000:00:1c.2: bridge window [mem 0xf6300000-0xf64fffff 64bit pref] [ 1.662175] pci 0000:00:1c.5: PCI bridge to [bus 05-0c] [ 1.662178] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff] [ 1.662185] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff] [ 1.662189] pci 0000:00:1c.5: bridge window [mem 0xf6500000-0xf66fffff 64bit pref] [ 1.662196] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] [ 1.662198] pci 0000:00:1e.0: bridge window [io disabled] [ 1.662203] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.662207] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.662226] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.662229] pci 0000:00:01.0: setting latency timer to 64 [ 1.662235] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.662239] pci 0000:00:1c.0: setting latency timer to 64 [ 1.662249] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.662253] pci 0000:00:1c.1: setting latency timer to 64 [ 1.662263] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.662267] pci 0000:00:1c.2: setting latency timer to 64 [ 1.662274] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.662278] pci 0000:00:1c.5: setting latency timer to 64 [ 1.662285] pci 0000:00:1e.0: setting latency timer to 64 [ 1.662290] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.662291] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.662293] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.662294] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 1.662296] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 1.662298] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 1.662299] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 1.662301] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 1.662302] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 1.662304] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 1.662305] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.662307] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff] [ 1.662309] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.662310] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff] [ 1.662312] pci_bus 0000:02: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref] [ 1.662314] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 1.662315] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff] [ 1.662317] pci_bus 0000:03: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref] [ 1.662319] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] [ 1.662320] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff] [ 1.662322] pci_bus 0000:04: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref] [ 1.662324] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 1.662325] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff] [ 1.662327] pci_bus 0000:05: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref] [ 1.662329] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 1.662330] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 1.662332] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 1.662333] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff] [ 1.662335] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff] [ 1.662336] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff] [ 1.662338] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff] [ 1.662340] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff] [ 1.662341] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff] [ 1.662343] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff] [ 1.662371] NET: Registered protocol family 2 [ 1.662493] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.663326] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.664926] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.665129] TCP: Hash tables configured (established 524288 bind 65536) [ 1.665131] TCP reno registered [ 1.665140] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.665158] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.665265] NET: Registered protocol family 1 [ 3.654527] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 5.653422] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 5.653552] pci 0000:01:00.0: Boot video device [ 5.653580] PCI: CLS 64 bytes, default 64 [ 5.653582] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.653584] Placing 64MB software IO TLB between ffff8800dac00000 - ffff8800dec00000 [ 5.653586] software IO TLB at phys 0xdac00000 - 0xdec00000 [ 5.654007] audit: initializing netlink socket (disabled) [ 5.654021] type=2000 audit(1304423138.500:1): initialized [ 5.664505] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.665866] VFS: Disk quotas dquot_6.5.2 [ 5.665907] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.666390] fuse init (API version 7.16) [ 5.666460] msgmni has been set to 7631 [ 5.666661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.666684] io scheduler noop registered [ 5.666686] io scheduler deadline registered [ 5.666716] io scheduler cfq registered (default) [ 5.666803] pcieport 0000:00:01.0: setting latency timer to 64 [ 5.666830] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 5.667085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.667102] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.667137] intel_idle: MWAIT substates: 0x1120 [ 5.667138] intel_idle: v0.4 model 0x25 [ 5.667139] intel_idle: lapic_timer_reliable_states 0xffffffff [ 5.673957] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.683948] ACPI: AC Adapter [ADP1] (on-line) [ 5.684063] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 5.704005] ACPI: Lid Switch [LID0] [ 5.704044] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 5.843324] ACPI: Power Button [PWRB] [ 5.843592] ACPI: acpi_idle yielding to intel_idle [ 5.884340] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.884344] ACPI: Thermal Zone [TZ00] (30 C) [ 5.904442] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.904447] ACPI: Thermal Zone [TZ01] (30 C) [ 5.904485] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.904542] ERST: Table is not found! [ 5.904594] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.924451] ACPI: Battery Slot [bAT0] (battery absent) [ 5.935064] Linux agpgart interface v0.103 [ 5.935938] brd: module loaded [ 5.936315] loop: module loaded [ 5.936377] i2c-core: driver [adp5520] using legacy suspend method [ 5.936378] i2c-core: driver [adp5520] using legacy resume method [ 5.936649] Fixed MDIO Bus: probed [ 5.936670] PPP generic driver version 2.4.2 [ 5.936697] tun: Universal TUN/TAP device driver, 1.6 [ 5.936698] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 5.936755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.936772] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.936793] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.936797] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.936826] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.936880] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.940762] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 5.940781] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000 [ 5.963254] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.963402] hub 1-0:1.0: USB hub found [ 5.963406] hub 1-0:1.0: 2 ports detected [ 5.963464] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.963475] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.963479] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.963513] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.963563] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.967449] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 5.967463] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000 [ 5.983246] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.983380] hub 2-0:1.0: USB hub found [ 5.983383] hub 2-0:1.0: 2 ports detected [ 5.983431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.983439] uhci_hcd: USB Universal Host Controller Interface driver [ 5.983509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 5.988274] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.988280] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.988363] mousedev: PS/2 mouse device common for all mice [ 5.988454] rtc_cmos 00:06: RTC can wake from S4 [ 5.988508] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 5.988537] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 5.988609] device-mapper: uevent: version 1.0.3 [ 5.988665] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 5.988727] device-mapper: multipath: version 1.2.0 loaded [ 5.988729] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.988888] cpuidle: using governor ladder [ 5.988999] cpuidle: using governor menu [ 5.989180] TCP cubic registered [ 5.989267] NET: Registered protocol family 10 [ 5.989653] NET: Registered protocol family 17 [ 5.989665] Registering the dns_resolver key type [ 5.991086] PM: Hibernation image not present or could not be loaded. [ 5.991095] registered taskstats version 1 [ 5.991468] Magic number: 11:618:781 [ 5.991622] rtc_cmos 00:06: setting system clock to 2011-05-03 11:45:39 UTC (1304423139) [ 5.991625] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.991626] EDD information not available. [ 5.993324] Freeing unused kernel memory: 956k freed [ 5.993486] Write protecting the kernel read-only data: 10240k [ 5.994296] Freeing unused kernel memory: 184k freed [ 5.998713] Freeing unused kernel memory: 1444k freed [ 6.012971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 6.019461] <30>udev[72]: starting version 167 [ 6.053535] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS [ 6.065412] sdhci: Secure Digital Host Controller Interface driver [ 6.065415] sdhci: Copyright© Pierre Ossman [ 6.068225] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0) [ 6.068250] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.068290] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 6.068300] sdhci-pci 0000:03:00.0: setting latency timer to 64 [ 6.068330] mmc0: no vmmc regulator found [ 6.068366] Registered led device: mmc0:: [ 6.068413] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA [ 6.068432] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0) [ 6.068457] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 6.068478] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it. [ 6.068486] sdhci-pci 0000:03:00.4: setting latency timer to 64 [ 6.068503] mmc1: no vmmc regulator found [ 6.068534] Registered led device: mmc1:: [ 6.068578] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA [ 6.093709] [drm] Initialized drm 1.1.0 20060810 [ 6.098173] sky2: driver version 1.28 [ 6.098215] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.098230] sky2 0000:04:00.0: setting latency timer to 64 [ 6.098269] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1 [ 6.098398] sky2 0000:04:00.0: irq 41 for MSI/MSI-X [ 6.099048] sky2 0000:04:00.0: eth0: addr 54:42:49:e7:b1:c5 [ 6.106966] ahci 0000:00:1f.2: version 3.0 [ 6.106979] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.107032] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 6.107067] ahci: SSS flag set, parallel bus scan disabled [ 6.107108] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode [ 6.107110] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst [ 6.107115] ahci 0000:00:1f.2: setting latency timer to 64 [ 6.107845] scsi0 : ahci [ 6.107977] scsi1 : ahci [ 6.108055] scsi2 : ahci [ 6.108133] scsi3 : ahci [ 6.108212] scsi4 : ahci [ 6.108292] scsi5 : ahci [ 6.115621] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 42 [ 6.115627] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 42 [ 6.115629] ata3: DUMMY [ 6.115631] ata4: DUMMY [ 6.115632] ata5: DUMMY [ 6.115635] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 42 [ 6.120415] acpi device:4b: registered as cooling_device4 [ 6.120500] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3 [ 6.120563] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 6.134104] [drm] radeon defaulting to kernel modesetting. [ 6.134106] [drm] radeon kernel modesetting enabled. [ 6.134156] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.134160] radeon 0000:01:00.0: setting latency timer to 64 [ 6.135280] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1). [ 6.135334] [drm] register mmio base: 0xF0020000 [ 6.135335] [drm] register mmio size: 131072 [ 6.135448] ATOM BIOS: Sony [ 6.135478] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 6.135480] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 6.136559] [drm] Detected VRAM RAM=1024M, BAR=256M [ 6.136562] [drm] RAM width 128bits DDR [ 6.136702] [TTM] Zone kernel: Available graphics memory: 1954844 kiB. [ 6.136705] [TTM] Initializing pool allocator. [ 6.136737] [drm] radeon: 1024M of VRAM memory ready [ 6.136740] [drm] radeon: 512M of GTT memory ready. [ 6.136767] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.136770] [drm] Driver supports precise vblank timestamp query. [ 6.136825] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.136830] radeon 0000:01:00.0: radeon: using MSI. [ 6.136865] [drm] radeon: irq initialized. [ 6.136867] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.137344] [drm] Loading REDWOOD Microcode [ 6.143632] radeon 0000:01:00.0: WB enabled [ 6.160209] [drm] ring test succeeded in 1 usecs [ 6.160304] [drm] radeon: ib pool ready. [ 6.160405] [drm] ib test succeeded in 0 usecs [ 6.160656] [drm] Radeon Display Connectors [ 6.160658] [drm] Connector 0: [ 6.160659] [drm] LVDS [ 6.160660] [drm] Encoders: [ 6.160661] [drm] LCD1: INTERNAL_UNIPHY [ 6.160662] [drm] Connector 1: [ 6.160663] [drm] HDMI-A [ 6.160664] [drm] HPD1 [ 6.160665] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 6.160667] [drm] Encoders: [ 6.160667] [drm] DFP1: INTERNAL_UNIPHY1 [ 6.160668] [drm] Connector 2: [ 6.160669] [drm] VGA [ 6.160671] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 6.160672] [drm] Encoders: [ 6.160673] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.164703] [drm] Internal thermal controller with fan control [ 6.164734] [drm] radeon: power management initialized [ 6.283114] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 6.392165] mmc1: new SDHC card at address 63d9 [ 6.395437] mmcblk0: mmc1:63d9 SD16G 14.9 GiB [ 6.396758] mmcblk0: p1 [ 6.433917] hub 1-1:1.0: USB hub found [ 6.434123] hub 1-1:1.0: 6 ports detected [ 6.463118] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.494932] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6.508355] ata1.00: ATA-8: OCZ-AGILITY2, 1.28, max UDMA/133 [ 6.508359] ata1.00: 107463888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.524899] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6.538314] ata1.00: configured for UDMA/133 [ 6.538429] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY2 1.28 PQ: 0 ANSI: 5 [ 6.538557] sd 0:0:0:0: [sda] 107463888 512-byte logical blocks: (55.0 GB/51.2 GiB) [ 6.538590] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.538623] sd 0:0:0:0: [sda] Write Protect is off [ 6.538627] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.538650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.540443] sda: sda1 sda2 [ 6.540658] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.552957] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 6.566340] [drm] fb mappable at 0xE0141000 [ 6.566342] [drm] vram apper at 0xE0000000 [ 6.566343] [drm] size 5787648 [ 6.566344] [drm] fb depth is 24 [ 6.566345] [drm] pitch is 6400 [ 6.566433] Console: switching to colour frame buffer device 200x56 [ 6.566456] fb0: radeondrmfb frame buffer device [ 6.566457] drm: registered panic notifier [ 6.566462] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0 [ 6.652942] Refined TSC clocksource calibration: 2526.999 MHz. [ 6.652948] Switching to clocksource tsc [ 6.703767] hub 2-1:1.0: USB hub found [ 6.704036] hub 2-1:1.0: 8 ports detected [ 6.783085] usb 1-1.2: new high speed USB device using ehci_hcd and address 3 [ 6.882877] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.884633] ata2.00: ATAPI: MAT{censored}ADVD-RAM UJ8A0AS, 1.00, max UDMA/100 [ 6.887409] ata2.00: configured for UDMA/100 [ 6.891406] scsi 1:0:0:0: CD-ROM MAT{censored}A DVD-RAM UJ8A0AS 1.00 PQ: 0 ANSI: 5 [ 6.894697] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.894703] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.894868] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.894937] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.002965] usb 1-1.6: new full speed USB device using ehci_hcd and address 4 [ 7.192860] usb 2-1.6: new full speed USB device using ehci_hcd and address 3 [ 7.242625] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.252519] ata6.00: ATA-8: SAMSUNG HM500JI, 2AC101U4, max UDMA/133 [ 7.252535] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.262552] ata6.00: configured for UDMA/133 [ 7.262712] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5 [ 7.262931] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 7.262968] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.263093] sd 5:0:0:0: [sdb] Write Protect is off [ 7.263098] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.263144] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.422611] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4 [ 7.422747] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.6/input0 [ 7.428041] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input5 [ 7.428219] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.6/input1 [ 7.444899] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/input/input6 [ 7.445121] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.6/input2 [ 7.445137] usbcore: registered new interface driver usbhid [ 7.445139] usbhid: USB HID core driver [ 7.733729] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 7.734173] sd 5:0:0:0: [sdb] Attached SCSI disk [ 8.917800] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.449939] Adding 4903316k swap on /dev/sda2. Priority:-1 extents:1 across:4903316k SS [ 13.454906] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.471545] <30>udev[369]: starting version 167 [ 13.507488] lp: driver loaded but no devices found [ 13.540431] sony-laptop: Sony Notebook Control Driver v0.6. [ 13.560501] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input7 [ 13.560601] input: Sony Vaio Jogdial as /devices/virtual/input/input8 [ 13.560706] sony-laptop: brightness ignored, must be controlled by ACPI video driver [ 13.590303] type=1400 audit(1304415947.099:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=505 comm="apparmor_parser" [ 13.590917] type=1400 audit(1304415947.099:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser" [ 13.591316] type=1400 audit(1304415947.099:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser" [ 13.628961] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 13.628976] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 13.629115] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled [ 13.635373] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 13.650994] cfg80211: Calling CRDA to update world regulatory domain [ 13.663952] Linux video capture interface: v2.00 [ 13.675705] Bluetooth: Core ver 2.15 [ 13.675733] NET: Registered protocol family 31 [ 13.675735] Bluetooth: HCI device and connection manager initialized [ 13.675738] Bluetooth: HCI socket layer initialized [ 13.716925] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 13.718309] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6409) [ 13.719382] usbcore: registered new interface driver btusb [ 13.728214] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9 [ 13.728337] usbcore: registered new interface driver uvcvideo [ 13.728340] USB Video Class driver (v1.0.0) [ 13.790548] type=1400 audit(1304415947.299:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=707 comm="apparmor_parser" [ 13.791181] type=1400 audit(1304415947.299:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=707 comm="apparmor_parser" [ 13.791606] type=1400 audit(1304415947.299:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=707 comm="apparmor_parser" [ 13.793442] type=1400 audit(1304415947.299:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=710 comm="apparmor_parser" [ 13.799114] type=1400 audit(1304415947.309:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=711 comm="apparmor_parser" [ 13.799518] type=1400 audit(1304415947.309:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=711 comm="apparmor_parser" [ 13.800455] type=1400 audit(1304415947.309:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=712 comm="apparmor_parser" [ 13.815356] sky2 0000:04:00.0: eth0: enabling interface [ 13.816564] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.908540] cfg80211: World regulatory domain updated: [ 13.908543] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.908546] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.908548] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.908551] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.908553] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.908556] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.914246] Bluetooth: L2CAP ver 2.15 [ 13.914248] Bluetooth: L2CAP socket layer initialized [ 13.926298] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.926312] ath9k 0000:02:00.0: setting latency timer to 64 [ 13.945265] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.945349] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 13.945386] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.949961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.949965] Bluetooth: BNEP filters: protocol multicast [ 13.971654] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10 [ 13.978190] ath: EEPROM regdomain: 0x65 [ 13.978193] ath: EEPROM indicates we should expect a direct regpair map [ 13.978197] ath: Country alpha2 being used: 00 [ 13.978199] ath: Regpair used: 0x65 [ 13.978203] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 13.978206] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978209] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 13.978212] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978215] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 13.978218] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978221] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 13.978224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978226] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 13.978230] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978232] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 13.978236] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978238] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 13.978241] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978244] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 13.978247] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978250] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 13.978253] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978256] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 13.978259] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978261] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 13.978265] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978267] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 13.978270] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978273] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 13.978276] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 13.978279] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 13.980672] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 13.990931] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11 [ 13.998191] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 13.999363] Registered led device: ath9k-phy0::radio [ 13.999448] Registered led device: ath9k-phy0::assoc [ 13.999517] Registered led device: ath9k-phy0::tx [ 13.999601] Registered led device: ath9k-phy0::rx [ 13.999610] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005520000, irq=16 [ 13.999955] Bluetooth: SCO (Voice Link) ver 0.6 [ 13.999957] Bluetooth: SCO socket layer initialized [ 14.031057] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.067714] Bluetooth: RFCOMM TTY layer initialized [ 14.067722] Bluetooth: RFCOMM socket layer initialized [ 14.067724] Bluetooth: RFCOMM ver 1.11 [ 14.078062] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.078223] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 14.078525] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.078601] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 14.078625] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 14.265892] ppdev: user-space parallel port driver [ 14.334004] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 311.337606] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 319.752320] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 351.902818] wlan0: authenticate with 00:25:9c:69:3d:f3 (try 1) [ 351.904843] wlan0: authenticated [ 351.904876] wlan0: associate with 00:25:9c:69:3d:f3 (try 1) [ 351.908842] wlan0: RX AssocResp from 00:25:9c:69:3d:f3 (capab=0x411 status=0 aid=5) [ 351.908847] wlan0: associated [ 351.916437] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 351.954284] Intel AES-NI instructions are not detected. [ 352.005364] padlock_aes: VIA PadLock not detected. [ 362.316437] wlan0: no IPv6 routers present [ 371.765448] exe (2195): /proc/2195/oom_adj is deprecated, please use /proc/2195/oom_score_adj instead. [ 2113.583012] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 2113.583051] ath: Failed to stop TX DMA! [ 2715.924942] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2715.924951] cfg80211: Restoring regulatory settings [ 2715.924958] cfg80211: Calling CRDA to update world regulatory domain [ 2715.930436] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2715.930445] cfg80211: World regulatory domain updated: [ 2715.930448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2715.930453] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2715.930457] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2715.930461] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2715.930465] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2715.930469] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2717.095299] wlan0: authenticate with 00:25:9c:69:3d:f3 (try 1) [ 2717.097370] wlan0: authenticated [ 2717.114336] wlan0: associate with 00:25:9c:69:3d:f3 (try 1) [ 2717.122209] wlan0: RX AssocResp from 00:25:9c:69:3d:f3 (capab=0x411 status=0 aid=5) [ 2717.122215] wlan0: associated Shortly spec: Processor: The Core i5-460M Graphics: ATI Mobility Radeon HD 5650 Chipset: Intel HM55 LAN: Marvel Yukon 88E8059 LAN WLAN: AR9285 What distribution or modification will I try to install? Anybody knows, where is the problem with USB and keyboard in S3 or 10.6.6i by Hazard? Thanks for help... Link to comment https://www.insanelymac.com/forum/topic/256217-osx-on-vpcec3m1e/ Share on other sites More sharing options...
kamillo1888 Posted May 3, 2011 Author Share Posted May 3, 2011 Hello,I've tried to install S3 and 10.6.6i by Hazard in my Vaio but I can't run USB and laptop keyboard and touchpad, so I can't change any more in system. This is my new notebook, previously I had HP 6270s and I havn't any probems with that. My dmesg says: Shortly spec: Processor: The Core i5-460M Graphics: ATI Mobility Radeon HD 5650 Chipset: Intel HM55 LAN: Marvel Yukon 88E8059 LAN WLAN: AR9285 What distribution or modification will I try to install? Anybody knows, where is the problem with USB and keyboard in S3 or 10.6.6i by Hazard? Thanks for help... When I install 10.6.3 by Hazard, my mouse and touchpad works correctly in Installation process, but system also can't start... I try: cpus=1 busratio=17 GraphicsEnabler=No But I have Kernel Panic, also in safe mode... Anyone Can help me? Link to comment https://www.insanelymac.com/forum/topic/256217-osx-on-vpcec3m1e/#findComment-1678506 Share on other sites More sharing options...
SteveRings Posted May 3, 2011 Share Posted May 3, 2011 Hello,I've tried to install S3 and 10.6.6i by Hazard in my Vaio but I can't run USB and laptop keyboard and touchpad, so I can't change any more in system. This is my new notebook, previously I had HP 6270s and I havn't any probems with that. My dmesg says: Shortly spec: Processor: The Core i5-460M Graphics: ATI Mobility Radeon HD 5650 Chipset: Intel HM55 LAN: Marvel Yukon 88E8059 LAN WLAN: AR9285 What distribution or modification will I try to install? Anybody knows, where is the problem with USB and keyboard in S3 or 10.6.6i by Hazard? Thanks for help... I used TonyMac's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with an edited DSDT. The USB problem can be addressed by using the USB 3.0 ports (if you have them) after loading the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] USB 3.0 driver. That will give you control of a USB mouse and keyboard until you can apply your other fixes. You can use the TM [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] without changing your current set-up assuming a 'standard' E/E Chameleon directory; if your distro didn't create that you will need to improvise your KEXT installation or start over. My machine was a Dell L701x (since sold) w/I5-560 and NVIDIA graphics but I got to 10.6.6 using TonyMac and a lot of patience. Link to comment https://www.insanelymac.com/forum/topic/256217-osx-on-vpcec3m1e/#findComment-1678517 Share on other sites More sharing options...
kamillo1888 Posted May 3, 2011 Author Share Posted May 3, 2011 I used TonyMac's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with an edited DSDT. The USB problem can be addressed by using the USB 3.0 ports (if you have them) after loading the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] USB 3.0 driver. That will give you control of a USB mouse and keyboard until you can apply your other fixes. You can use the TM [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] without changing your current set-up assuming a 'standard' E/E Chameleon directory; if your distro didn't create that you will need to improvise your KEXT installation or start over. My machine was a Dell L701x (since sold) w/I5-560 and NVIDIA graphics but I got to 10.6.6 using TonyMac and a lot of patience. I haven't USB 3.0 Link to comment https://www.insanelymac.com/forum/topic/256217-osx-on-vpcec3m1e/#findComment-1678540 Share on other sites More sharing options...
Recommended Posts