Help with installation ATI Mobility Radeon HD 4570 on Acer Aspire 5536G-643G25Mn

[pipko]

Greeting

Can somebody help with installation ATI Mobility Radeon HD 4570

 

Acer Aspire 5536G-643G25Mn:

AMD Athlon 64 x2 Dual-Core Processor QL-64 ( 2.1GHz, 1MB L2 CACHE )

Motherboard Chipset AMD 760G/780G/780V/785G/790GX/880G/890GX, AMD K11

3 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)

ATI Mobility Radeon HD 4570 512MB

250 GB HDD

Audio Adapter Realtek ALC888 @ ATI SB700 - High Definition Audio Controller

IDE Controller Standard AHCI 1.0 Serial ATA Controller

Network Adapter Atheros AR5B91 Wireless Network Adapter (192. [ TRIAL VERSION ])

Network Adapter Broadcom NetLink Gigabit Ethernet (192. [ TRIAL VERSION ])

USB2 Controller ATI SB700 - EHCI USB 2.0 Controller

Description ATI RS690M

North Bridge AMD RS780/RS880

PCI-E 2.0 x16 port #0 In Use @ x16 (ATI Mobility Radeon HD 4570 (Acer) Video Adapter, ATI RV710/730/740 - High Definition Audio Controller)

PCI-E 2.0 x1 port #1 In Use @ x1 (Broadcom NetLink BCM5784M PCI-E Gigabit Ethernet Controller)

PCI-E 2.0 x1 port #2 In Use @ x1 (Atheros AR5009 802.11a/g/n Wireless Network Adapter)

Codec Name Realtek ALC888

 

Chameleon 2 RC5 rev. 750 (Trunk 750)

Operating System Retail Snow Leopard 10.6.6 + Windows 7 Ultimate

 

A manual for installation ATI Mobility Radeon HD 4570 on Acer Aspire 5536G-643G25Mn (New Member in osx)

Thanks

 

Google Translate

[pipko]

I climbed up here but I have no knowledge from Patching, so if you can help.

I think I'm very close to working ATI Mobility Radeon HD 4570 (Google Translate)

Thanks

 

 

System Version: Mac OS X 10.6.7 (10J869)

 

ATOM BIOS Rom:

SubsystemVendorID: 0x1025 SubsystemID: 0x0224

IOBaseAddress: 0x9000

Filename: BR32037.001

BIOS Bootup Message:

Acer_JV50_PU_M92M2_XT_DDR2 M92 DDR2 64bit 680e/500m

 

PCI ID: 1002:9553

Connector at index 0

Type [@offset 45774]: LVDS (7)

Encoder [@offset 45778]: INTERNAL_UNIPHY2 (0x21)

i2cid [@offset 45836]: 0x96, OSX senseid: 0x7

Connector at index 1

Type [@offset 45784]: VGA (1)

Encoder [@offset 45788]: INTERNAL_KLDSCP_DAC1 (0x15)

i2cid [@offset 45859]: 0x90, OSX senseid: 0x1

Connector at index 2

Type [@offset 45794]: HDMI-A (11)

Encoder [@offset 45798]: INTERNAL_UNIPHY (0x1e)

i2cid [@offset 45882]: 0x91, OSX senseid: 0x2

 

-------------------------------------------------------------------------------------------------------------------------------

 

Mapping DIG1 encoder to KLDSKP_UNIPHYE

Crtc[0]: found native mode from Monitor[LVDS Panel]:

Modeline "1366x768" 72 1366 1414 1446 1526 768 770 775 790

Connector "PANEL" uses Monitor "LVDS Panel":

DxModeValid: ATOM CRTC 1

Listing modesetting layout:

ATOM CRTC 1: tied to Atom PLL 1 and LUT A:

Outputs: AtomOutputUniphyE (PANEL)

ATOM CRTC 2: unused

Unused Outputs: AtomOutputDACA, AtomOutputUniphyA

Validating Modes from Monitor "LVDS Panel" on "PANEL"

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 2

FUNCTION: DxFBValid: ATOM CRTC 1

FUNCTION: DxFBValid: ATOM CRTC 2

Using 116x85 DPI.

Using 1366x1024 Framebuffer with 1408 pitch

Free FB offset 0x00000000 (size = 0x10000000)

Display resolutions detected:

1366 X 768 @ 59Hz

1280 X 1024 @ 75Hz

1024 X 768 @ 60Hz

800 X 600 @ 60Hz

640 X 480 @ 60Hz

[Martuzki]

Any sulotion?