Mateo Deger Posted April 13, 2011 Share Posted April 13, 2011 I've fixed some errors, but i couldn't find solution for these errors, Could you check too? HP G62-b16ST Notebook : i3-370M, HM55, HD 5470, Broadcom 4313 Intel ACPI Component Architecture ASL Optimizing Compiler version 20110316-32 [Mar 16 2011] Copyright © 2000 - 2011 Intel Corporation dsdt.dsl 2771: 0x00000000, // Length Error 4122 - ^ Invalid combination of Length and Min/Max fixed flags dsdt.dsl 6687: Name (_PLD, Buffer (0x10) Error 4080 - Invalid object type for reserved name ^ (found BUFFER, requires Package) dsdt.dsl 9234: Acquire (MWMI, 0x0005) Warning 1105 - ^ Result is not used, possible operator timeout will be missed dsdt.dsl 10316: Method (FRSP, 0, NotSerialized) Warning 1088 - ^ Not all control paths return a value (FRSP) ASL Input: dsdt.dsl - 11811 lines, 393969 bytes, 4957 keywords Compilation complete. 10 Errors, 2 Warnings, 0 Remarks, 4 Optimizations [Completed] here att: G62_DSDTS.rar Link to comment Share on other sites More sharing options...
MaLd0n Posted April 13, 2011 Share Posted April 13, 2011 dsdt.Mateo_Deger.zip DTGP EHCI FN HDEF HPET IRQs LPC OS PATCHING PNLF RTC SMBUS SHUTDOWN Link to comment Share on other sites More sharing options...
morkb Posted April 14, 2011 Share Posted April 14, 2011 Hi, i've more or less the same notebook (mine is hp g62 b08sl..i3 350 4giga and ati 1 gb 5470) did you get to install retail snow leopard? I've got the full installation and the installed system works with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd but if I put chameleon 2 rc5 from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] insatllation..I can't boot ...notebook keeps restarting after ati post...I think the problem is the integrated intel graphic card that it cannot disable fom bios...I can boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and -v cpus=1 kernel flag with original mach_kernel...but not with chameleon...how did you get to install the bootloader? one another thing..did you get to update to 10.6.7?...as after updating (before I had to remove IoPlatformpluginfamily.kext...otherwise kernel panic during the combo installation) I got stucked to DSMOS has arrived....even with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and all the kernel flags enabled!!... please any help if you got it...what do you think I can use the fixed dsdt.aml file that MaLd0n kindly provide you? what do you think..MaLd0n..might it be possible?... hardware seems quite similar.. thank you very much Marco Link to comment Share on other sites More sharing options...
MaLd0n Posted April 14, 2011 Share Posted April 14, 2011 what do you think..MaLd0n..might it be possible?... hardware seems quite similar.. send me files http://www.insanelymac.com/forum/index.php...st&id=81816 Link to comment Share on other sites More sharing options...
morkb Posted April 14, 2011 Share Posted April 14, 2011 send me fileshttp://www.insanelymac.com/forum/index.php...st&id=81816 Thank you..that's very kind from you!! here you go..I just restore the fresh 10.6.0 install and loaded with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd just one question...which bootloader would be required for ati5470..chameleon 2 rc5 r748 by kabyl from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with ati support and should i use ati 1.6.32.12 from 10.6.7 update? thank you again send_me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2011 Share Posted April 15, 2011 just one question...which bootloader would be required for ati5470..chameleon 2 rc5 r748 by kabyl from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with ati support and should i use ati 1.6.32.12 from 10.6.7 update? I do not know sorry dsdt.morkb.zip DTGP HDEF IRQs RENAME RTC SMBUS HPET LPC EHCI SHUTDOWN OS PATCHING FN KEYS PNLF FIX WARNINGS Link to comment Share on other sites More sharing options...
Mateo Deger Posted April 15, 2011 Author Share Posted April 15, 2011 hi, I hope that you're ok. i've tried to install OSX with fixed DSDT But i had problems: F718X: Fintek: Found unspported chip ID:0x85 Rev=0x2 IT87x:[Warning] Founded unspported chip ID:0x8502 W836x: Same ID:0x85 Rev=0x2 com.apple.driver.AppleACPIPlatform (1.3.5)@0xfffff7f80616000 -->0xfffff7f8065dfff dependency: com.apple.iokit.IOACPIFaamily (1.3.0)@0xfffff7f80604000000 // (2.6)@0xfffff7f80604000 So i've reinstalled without DSDT. i had clean install with Nawcom's Mod CD but as you know, no update. Here is my info. Could you check please again? send_me.zip Link to comment Share on other sites More sharing options...
Mateo Deger Posted April 15, 2011 Author Share Posted April 15, 2011 Hi, i've more or less the same notebook (mine is hp g62 b08sl..i3 350 4giga and ati 1 gb 5470) did you get to install retail snow leopard? I've got the full installation and the installed system works with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd but if I put chameleon 2 rc5 from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] insatllation..I can't boot ...notebook keeps restarting after ati post...I think the problem is the integrated intel graphic card that it cannot disable fom bios...I can boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and -v cpus=1 kernel flag with original mach_kernel...but not with chameleon...how did you get to install the bootloader? one another thing..did you get to update to 10.6.7?...as after updating (before I had to remove IoPlatformpluginfamily.kext...otherwise kernel panic during the combo installation) I got stucked to DSMOS has arrived....even with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and all the kernel flags enabled!!... please any help if you got it...what do you think I can use the fixed dsdt.aml file that MaLd0n kindly provide you? what do you think..MaLd0n..might it be possible?... hardware seems quite similar.. thank you very much Marco hi there, http://blog.nawcom.com/ModCD/OSX86_ModCD-0...-151021.iso.zip try this one. you dont have to do anything. it installs retial disk well, ModCD selects kexts automatically, btw you will have 256mb ati 5470, sound, network Hmm about to update fully to 10.6.7 needs some sometime. you need good DSDT. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2011 Share Posted April 15, 2011 remove plug ins fakesmc F718X / IT87x The DSDT is correct Link to comment Share on other sites More sharing options...
morkb Posted April 15, 2011 Share Posted April 15, 2011 hi there, http://blog.nawcom.com/ModCD/OSX86_ModCD-0...-151021.iso.zip try this one. you dont have to do anything. it installs retial disk well, ModCD selects kexts automatically, btw you will have 256mb ati 5470, sound, network Hmm about to update fully to 10.6.7 needs some sometime. you need good DSDT. Thank you very much! I wiil try that...let me know when you will able to install the update! Marco I do not knowsorry dsdt.morkb.zip DTGP HDEF IRQs RENAME RTC SMBUS HPET LPC EHCI SHUTDOWN OS PATCHING FN KEYS PNLF FIX WARNINGS Thank you indeed!...you save a lot of time!!!!! Thabks again Link to comment Share on other sites More sharing options...
morkb Posted April 16, 2011 Share Posted April 16, 2011 hi there, http://blog.nawcom.com/ModCD/OSX86_ModCD-0...-151021.iso.zip try this one. you dont have to do anything. it installs retial disk well, ModCD selects kexts automatically, btw you will have 256mb ati 5470, sound, network Hmm about to update fully to 10.6.7 needs some sometime. you need good DSDT. Hi mateo, just a question did you manage to get the standalone boot with that nawcom disk...ie are you able to start the retail installe snow without any boot cd...but booting directly from the hard drive...I couldn't find any post installation apps or option to install bootloader thank you very much Marco Link to comment Share on other sites More sharing options...
Recommended Posts