burns154 Posted January 7, 2011 Share Posted January 7, 2011 I recently updated to 10.6.6 from 10.6.5 and now when I boot I get a kernel panic. I know what the cause is, it is my Sleepenabler kext. I just don't know how to remove it without access to my mac partition. I have Windows 7 with MacDrive 8, but it keeps giving me errors when I try to delete it. As of this moment, I don't have an installer USB. Is there a way I can delete it without making another Installer USB stick? I forgot to mention that I have Chameleon RC5. Thanks. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/ Share on other sites More sharing options...
Dellmantt Posted January 7, 2011 Share Posted January 7, 2011 http://www.google.com.au/search?hl=en&...q=&gs_rfai= Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617439 Share on other sites More sharing options...
burns154 Posted January 7, 2011 Author Share Posted January 7, 2011 I can't access single user mode. I get to the Chameleon boot screen and when I click any of the boot options such as Verbost Ignore caches Single User Mode All result into me getting a Kernel Panic. I'm not sure how to delete the file. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617445 Share on other sites More sharing options...
Dellmantt Posted January 8, 2011 Share Posted January 8, 2011 I can't access single user mode. I get to the Chameleon boot screen and when I click any of the boot options such as Verbost Ignore caches Single User Mode All result into me getting a Kernel Panic. I'm not sure how to delete the file. Try booting with pmVersion=0 or pmVersion=21 Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617476 Share on other sites More sharing options...
burns154 Posted January 8, 2011 Author Share Posted January 8, 2011 I am going to make another install USB. Once I access the installer, what should I type into Terminal? My Chameleon boots from the EFI Partition. The Sleepenabler.kext is located there also. How do I boot with PMVersion=20? I only have the 3 or 4 options. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617558 Share on other sites More sharing options...
breakingbad Posted January 8, 2011 Share Posted January 8, 2011 I am going to make another install USB. Once I access the installer, what should I type into Terminal? My Chameleon boots from the EFI Partition. The Sleepenabler.kext is located there also. How do I boot with PMVersion=20? I only have the 3 or 4 options. When Chameleon loads up just type pmVersion=21 and press enter. Simple like that. Cheers, bb. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617576 Share on other sites More sharing options...
Dellmantt Posted January 8, 2011 Share Posted January 8, 2011 I am going to make another install USB. Once I access the installer, what should I type into Terminal? My Chameleon boots from the EFI Partition. The Sleepenabler.kext is located there also. I have never done it, try searching for "remove kext in terminal". i assume it would be something like "rm -r /Volumes/partition_name/xxxxxx.kext" How do I boot with PMVersion=20? I only have the 3 or 4 options. Most versions of Chameleon you can hit the space bar and then type the command in, like "-v" for verbose or "-s" for single user Strange how you get a kernel panic in single user mode. Do you use a vanilla or a patched kernel? How did you update from 10.6.5. to 10.6.6, software update or did you download and run the updater. @breakingbad sorry did not see your post before I began typing Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617596 Share on other sites More sharing options...
burns154 Posted January 8, 2011 Author Share Posted January 8, 2011 I run vanilla kernel, it whatever the non-patched kernel is. I just went to system update. My specs are in my signature. I tested the following commands and they all led to the same Kernel Panic PMVersion=20 PMVersion=20 -s PMVersion=21 PMVersion=21 -s My Kernel Panic is this. (I don't have a camera at the moment.) mpvhash=4095 PAE enabled 64 bit mode enabled Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 vm_page_bootstrap: 510663 free pages and 13625 wired pages standard timeslicing quantum is 10000 us mig_table_max_displ = 73 SleepEnabler: Registering PowerManagement dispatch table panic(cpu caller 0x2ab790): "Version mis-match between Kernel and CPU PM"@/SourceCache/xnu/xnu-1504.9.26/osfmk/i386/pmCPU.c:707 Debugger called: <panic> Backtrace (CPU 0), Frame : Return Address (4 potential args on stack) 0x2f13bbb8 : 0x21b50c (0x5d4438 0xf13bbec 0x223947 0x0 0x2f13bc08 : 0x2ab790 (0x59645c 0x1 0xe 0x2f13bc34) 0x2f13bc28 : 0x2f2e4140 (0x16 0x2f2e4d00 0x2f2e4ca0 0x4769020) 0x2f13bc68 : 0x2f2e44cd (0x2f2e4bc0 0x0 0x5d7222c 0x2f13bcac) 0x2f13bc98 : 0x508e00 (0x2f2e4bc0 0x0 0x5d7222c 0x48142c0) 0x2f13bcf8 : 0x50a389 (0x4818300 0x1 0x2 0x0) 0x2f13bd78 : 0x50a74a (0x4818300 0x0 0x2 0x0) 0x2f13bdd8 : 0x50a866 (0x4773d20 0x1 0x0 0x0) 0x2f13be28 : 0x5496ce (0x480c980 0x1 0x0 0x0) 0x2f13be58 : 0x5496ce (0x46e6620 0x480ca00 0x5 0x480b0c0) 0x2f13be78 : 0x53a8ac (0x46e6620 0x480b0c0 0x1 0x4773860) 0x2f13bf28 : 0x53b334 (0x46e7f00 0x477d140 0x0 0xffffffff) 0x2f13bf78 : 0x53cfe3 (0x46e7f00 0x0 0x2f13bfac 0x1 0x2f13bfc8 : 0x2a06cc (0x4b3ece0 0x0 0xffffff 0xffffff) Kernel Extensions in backtrace (with dependencies) sk.triaxis.kext.SleepEnabler(10.5.0)@0x2f2e3000->0x2f2e4fff BSD process name corresponding to current thread: Unknown Mac OS version Not yet set Kernel version Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 System model name: MacPro 3,1 System uptime in nanoseconds: 309324683 Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1617904 Share on other sites More sharing options...
burns154 Posted January 8, 2011 Author Share Posted January 8, 2011 I removed SleepEnabler.kext with the command rm -r /Volumes/EFI/Extra/Extensions/SleepEnabler.kext. I restarted and I still get the same Kernel Panic as the one above. I'm not sure what the problem is now. I have the following kexts loaded, image is linked below. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1618033 Share on other sites More sharing options...
Dellmantt Posted January 9, 2011 Share Posted January 9, 2011 I removed SleepEnabler.kext with the commandrm -r /Volumes/EFI/Extra/Extensions/SleepEnabler.kext. I restarted and I still get the same Kernel Panic as the one above. I'm not sure what the problem is now. I have the following kexts loaded, image is linked below. Try removing the Extensions.mkext from the EFI partition Also some people are having trouble with HDAEnabler with 10.6.6 Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1618923 Share on other sites More sharing options...
burns154 Posted January 9, 2011 Author Share Posted January 9, 2011 Hey, thanks for the help. It turns out I had another SleepEnabler kext in my S/L/E folder. There was no problem with my EFI partition. Quote Link to comment https://www.insanelymac.com/forum/topic/242100-update-to-1066-help/#findComment-1618992 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.