Jump to content

guia instalar snow leopard 10.6.3 en asus M2N68-AM PLUS


picarzo
 Share

1 post in this topic

Recommended Posts

EN ESPAÑOL:

despues de varios intentos por instalar snowleopard en la placa m2n68-am plus , estas son mis experiencias:

para instalar escogi la version de iaktos 10.6.3

primero probe a instalarlo con dvdr sata , pero no pasaba del arranque .

cambie a grabadora ide y pude instalarlo sin problemas.

despues de instalar tube problemas para que me reconociera los discos usb externos ; la solucion es tan sencilla como quitar unos cuanto kext de mas que habia instalado en la carpeta extra.

dichos kest son :(appleACPIPS2Nub.kext ,VoodooPS2controler.kext ,ElliotForceLegacyRTC.kext ,IOUSBFamily.kext)

hay que ejecutar despues kext_utility para reparar permisos y fijar los kext .

con esto funciona todo bien con el hadware que tengo instalado en mi pc :

-placa asus M2N68-AM PLUS (kext nforce para placa base y para lan)

-procesador amd phenom quad core 9500 (kernel parcheado intel y amd)

-grafica nvidia gf9800gt (nvenablers.kext)

-disco 320 gb sata

-2 gb memoria ddr2

-grabadora ide para instalar y sata para despues de instalar (recomendable dejar la ide por di la sata nos da problemas para grabar)

como gestor de arranque instale chemeleon rc4 con grafics enablers , ethernet ,usb.

arranco a la primera sin problemas y el sistema es muy rapido y estable (no kernel panics por el momento)

eso es todo y espero que haya servido de ayuda para alguien.

EN INGLES:

after several attempts to install on-board snowleopard M2N68-AM plus, these are my experiences:

chose to install the version of 10.6.3 iaktos

first try to install with sata dvdr, but that was starting.

switch to ide burner and I could install it without problems.

tube after installing problems getting my usb recognizing external drives, the solution is as simple as removing a few kext's more that he had installed in the extra folder.

KEST these are: (appleACPIPS2Nub.kext, VoodooPS2controler.kext, ElliotForceLegacyRTC.kext, IOUSBFamily.kext)

need to run repair permissions after kext_utility and fix kext.

This works well with all the hardware environment that I have installed on my pc:

-ASUS M2N68-AM PLUS (nforce kext for motherboard and lan)

-amd phenom quad core processor 9500 (kernel patched intel and amd)

-nvidia graphics gf9800gt (nvenablers.kext)

-320 gb sata drive

-2 GB DDR2 memory

-DVD recorder ide to install and sata after installing (recommended by di leave the sata ide gives us trouble recording)

as the boot loader to install chemeleon rc4 wit (grafics enablers, ethernet, usb).

I start with the first no problems and the system is very fast and stable (no kernel panics for the moment)

I hope that's all that has been helpful to someone.

Utilizar el Traductor de Google para:BúsquedasVídeosCorreo electrónicoMóvilChatEmpresa

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...