iPino Posted October 12, 2010 Share Posted October 12, 2010 Hi everyone, those are my specs i3 540@3.06GHz Asus P7H55-M/USB3 4GB 1600mHz DDR3 RAM 1TB Caviar Green HDD Sapphire HD4670 And this is my problem Using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] supported+retail 10.6 DVD i am able to boot in safe mode in 10.6 with vanilla 10.4.0 mach_kernel. if i do the comboupdate and run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] it will boot, but won't get me in the login screen. it's like there's no signal to the monitor(i'm on a CRT and the monitor status light becomes yellow instead of green). the weird thing is that on some lines in the boot process i see that "log will be saved in /dev/console/" but if i go there from a second partition (i have two OSX partition so in case one goes wrong or an update screws it i can have my back covered by simply using CarbonCopyCloner) i can't see anything, so i can't tell what's going on precisely in the boot process. i patched my DSDT table, no errors & 67 optimizations and added almost all useful hacks (except time machine one, i wouldn't use it anyway and it was simply too much hassle for something i don't plan to use). for now, i keep having this problem no matter what i change. my only kext is FakeSMC(once i can boot i can make soundðernet to work). as long as i can tell nothing is wrong, or at least i can't see nothing wrong while looking at the text scrolling, if i had a log maybe i'll see something that now i can't. Suggestions anyone? Also, my board is nowhere listed as supported, so i can include my DSDT and share my experience if everything goes right. Sorry for my bad english but i'm italian Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/ Share on other sites More sharing options...
ichoderso Posted October 13, 2010 Share Posted October 13, 2010 Hi ipino, My understanding is, that dsdt is very near to BIOS and your additional cards/Hardware Configuration. I had equal problems by using dsdt file. I thought - guys who have the same board ... I can use the dsdt, because its The same configuration. As a result i get crashes, kernel panics. I think The good way is TO setup your down dsdt by using The http://www.insanelymac.com/forum/index.php?showtopic=142434. You can type in your own configuration, used graphic cards... For me it worked. Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/#findComment-1563938 Share on other sites More sharing options...
iPino Posted October 13, 2010 Author Share Posted October 13, 2010 i used DSDTSE to patch my DSDT, and the only PCI slot i used is for graphic card. i edited manually my DSDT, so it was created by me and not copied from dsdt database, therefore it's not a problem with being tailored for another system. if i knew a way to log the things that come out at boot, maybe i could see something i had not noticed before, any ideas on how to do it? Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/#findComment-1564050 Share on other sites More sharing options...
iPino Posted October 13, 2010 Author Share Posted October 13, 2010 SOLVED! Apparently i had to use 10.6.2 kext for my video card, and everything went smooth. tomorrow i'll upload my dsdt in the database and do some other community things like osx86 compatibility list and so on Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/#findComment-1564094 Share on other sites More sharing options...
Martin Llanos Posted October 30, 2010 Share Posted October 30, 2010 SOLVED! Apparently i had to use 10.6.2 kext for my video card, and everything went smooth. tomorrow i'll upload my dsdt in the database and do some other community things like osx86 compatibility list and so on Please, share DSTD. Mi config: i5 750 Asus P7H55-M/USB3 4GB de RAM DDR3 1600MHz Gkill 500Mb WC Blue (Partitions: 1 (100mb, 2 100Gb Windows 7 64, 3 Unused) Shappire HD4670 1G DDR3 Thanks! Max OS x, Long life Pic. Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/#findComment-1573155 Share on other sites More sharing options...
Skywalkerz Posted November 22, 2010 Share Posted November 22, 2010 Please, share DSTD. Mi config: i5 750 Asus P7H55-M/USB3 4GB de RAM DDR3 1600MHz Gkill 500Mb WC Blue (Partitions: 1 (100mb, 2 100Gb Windows 7 64, 3 Unused) Shappire HD4670 1G DDR3 Thanks! Max OS x, Long life Pic. Help me too i5 760 Asus P7H55-M/USB3 4GB RAM DDR3 1600MHz Gkill 320GB Seagate SATA II Asus Ati HD3870 512MB Dual DVI Quote Link to comment https://www.insanelymac.com/forum/topic/234280-ibootmultibeast-no-video-out-after-1064-combo/#findComment-1589154 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.