Jump to content

Kernel Panic


mirloc
 Share

2 posts in this topic

Recommended Posts

So I installed iAtkos S3 V2 on a Lenovo R400 laptop. The installation went smoothly, and the OS boots perfectly and quickly. I have a few hardware issues, but nothing really critical at this point. The wireless, bluetooth and Intel NIC are not working, all other hardware - including the audio - work perfectly.

 

I installed xcode_3.2.3_and_ios_sdk_4.0.1, which also went very smooth (via USB drive). Ran the software and all was working. So I shut down the laptop for the night, booted it up the next night to a kernel panic (see attached).

 

System Specs:

Processor: Intel Core 2 Duo P8700 / 2.53 GHz

Graphics Processor / Vendor: Intel GMA 4500MHD

RAM: DDR3 SDRAM - 1066 MHz (2GB)

Hard Drive: 250 GB - Serial ATA-150 - 5400 rpm

 

Any help or suggestions would be appreciated.

post-647485-1280191684_thumb.jpg

Link to comment
Share on other sites

So I installed iAtkos S3 V2 on a Lenovo R400 laptop. The installation went smoothly, and the OS boots perfectly and quickly. I have a few hardware issues, but nothing really critical at this point. The wireless, bluetooth and Intel NIC are not working, all other hardware - including the audio - work perfectly.

 

I installed xcode_3.2.3_and_ios_sdk_4.0.1, which also went very smooth (via USB drive). Ran the software and all was working. So I shut down the laptop for the night, booted it up the next night to a kernel panic (see attached).

 

System Specs:

Processor: Intel Core 2 Duo P8700 / 2.53 GHz

Graphics Processor / Vendor: Intel GMA 4500MHD

RAM: DDR3 SDRAM - 1066 MHz (2GB)

Hard Drive: 250 GB - Serial ATA-150 - 5400 rpm

 

Any help or suggestions would be appreciated.

 

 

this panic from voodoohda try boot with -x -v

 

and remove it and install the latest one 2.62

Link to comment
Share on other sites

 Share

×
×
  • Create New...