estin Posted July 2, 2010 Share Posted July 2, 2010 Hello everyone. I'm succesfully installed SL 10.6.2 from hazard and upgraded to 10.6.4. I have a PCIe Geforce 6200 64MB with TurboCache wich uses the NV44 core. My problem is when putting an EFI string for the card (several tries) or use any injector (NVEnabler,ATY_init,NVInject, Natit....) the card get's recognized, NVDANV40Hal get's loaded and registered, but just before the GUI starts the computer reboots. I tried to flash the card with different bios from different brands and the same problem happen. Reading the forums I see that this card is supported by the NVDANV40Hal, and only the problems come with the AGP version (and the AGP is the problematic part). Maybe the TurboCache is the issue?... I think that TurboCache is an implementation in the driver, maybe is needed for the card to work. Does anyone help me diagnose this weird problem?? I don't have seen any post talking about reboots just before the gui starts, the people have other kind of errors. Also I tried all of this on both 10.6.2 and 10.6.4 with no luck. Here's my specs: AMD64 3700+ @ 2200Mhz /W SSE3 MSI MS-7093 socket 939 AMD. 2Gb ram ddr400 dual-channel. PCIe Geforce 6200 64mb W/ TurboCache 250GB Serial ATA HDD using legacy_kernel 10.6.4 annappirtrvh v4. Thank you ! Link to comment Share on other sites More sharing options...
estin Posted July 2, 2010 Author Share Posted July 2, 2010 Sorry, I forgot to mention that I also extracted the NVCAP from the current flashed firmware using NVCAP maker and put into the injectors. Still the same problem. Link to comment Share on other sites More sharing options...
Recommended Posts