aLinux09 Posted May 23, 2010 Share Posted May 23, 2010 if i try to boot any OS X x86 install on my pc,it starts booting for 3-5 seconds then it reboots this happens with any os x x86 im not sure why or what to do My PC: Memory: 2048MB RAM Processor: Intel® Core2 Quad CPU Q8300 @ 2.50GHz (4 CPUs), ~2.5GHz Video: Nvidia GeForce 9600 GT 512 ddr3 256 bit Motherboard: ASRock 4core1600-GLAN HDD: Sata2 250 GB (Sata Master) HDD2: Ide 40 GB (Ide Master) any help please ? thank you Link to comment Share on other sites More sharing options...
savageinjun Posted May 24, 2010 Share Posted May 24, 2010 are you dualbooting?onto single disk with partition or onto 2 separate disks??...or just installing osx86 by itself?? Link to comment Share on other sites More sharing options...
aLinux09 Posted May 24, 2010 Author Share Posted May 24, 2010 are you dualbooting?onto single disk with partition or onto 2 separate disks??...or just installing osx86 by itself?? im using sata for windows 7 and ide for os x but i have set ide on master when i try to install os x any options ? Link to comment Share on other sites More sharing options...
dat_geezer Posted May 25, 2010 Share Posted May 25, 2010 What are your boot options? Can you select which device to boot? EG, with mine, i can press F12 to boot from device, but every BIOs will differ. Link to comment Share on other sites More sharing options...
aLinux09 Posted May 25, 2010 Author Share Posted May 25, 2010 yes i can select device to boot from with F12 and also set in bios boot order and also disable other boot devices Link to comment Share on other sites More sharing options...
dat_geezer Posted June 7, 2010 Share Posted June 7, 2010 Have you managed to solve this problem? I'm curious as to why it's restarting all the time. Do you see any installation instructions? eg: does a page allow you to press F8 and enter command line instr? M. Link to comment Share on other sites More sharing options...
aLinux09 Posted June 7, 2010 Author Share Posted June 7, 2010 Im going to make a video today to show you my problem Link to comment Share on other sites More sharing options...
michael.su Posted June 7, 2010 Share Posted June 7, 2010 What install disc are you using? are you trying a retail install or a hacked dvd? (ex.iPC,Kalyway,iDeneb etc.) if it was a downloaded image, did you check the MD5 checksum to make sure the image was not corrupt before burning? does the computer boot other install discs fine? Windows, Linux, BSD whatever... Link to comment Share on other sites More sharing options...
aLinux09 Posted June 7, 2010 Author Share Posted June 7, 2010 What install disc are you using? are you trying a retail install or a hacked dvd? (ex.iPC,Kalyway,iDeneb etc.)if it was a downloaded image, did you check the MD5 checksum to make sure the image was not corrupt before burning? does the computer boot other install discs fine? Windows, Linux, BSD whatever... i used ideneb,ipc,universal,iatkos and same result windows,linux works just fine and the OSX X86 worked fine on my other pc Link to comment Share on other sites More sharing options...
Siddharth Thiagarajan Posted June 15, 2010 Share Posted June 15, 2010 I'm Totally New To MAC Installation.. I'm an aspiring editor.. So I'm trying to install MAC on my PC to Use Final Cut Pro.. This Is My PC's Config : Intel Core 2 Duo E4600 2.4GHz .. Intel 945GCNL Motherboard 4 GB DDR2 RAM nVidia 9500 1GB Graphics I Downloaded iDeneb 1.4 10.5.6 ... Burned It On To A DVD... Put It On.. Tried To Boot.. Pressed F8 and -v .... It came down to ACPI and got stuck there.. How do i proceed.. Please Help Me... Link to comment Share on other sites More sharing options...
Recommended Posts