Jump to content

How to activate QE after IDeneb 10.5.8 update ?


3 posts in this topic

Recommended Posts

hey guys,


i successfully updated from 10.5.1 to 10.5.8 with IDeneb combo update

after doin so, QE was gone ....


havent found any tutorials for activating QE for 10.5.8 so i hope u guys may help me out


i've tried NVinject and NVKush ... only helped me to get my resolution back


any ideas ???


my spec:


Vanilla Kernel

Core 2 Duo 4500


7900GS Nvidia

Link to comment
Share on other sites

First install the latest nvidia drivers for OS X 10.5.x:



If you don't use the MacPro3,1 model identifier, then you need to remove the installation check before running the installer:



Then make sure your video card's device ID is present among the other device IDs in info.plist inside NVDAResman.kext and NVDANV40Hal.kext:



I recommend using NVEnabler.kext for injection:



Make sure your primary display is plugged into the connector that's closest to the motherboard. If you can't do that, you will need to use a custom NVCAP value that sets the connector farthest from the motherboard as the primary output.

Link to comment
Share on other sites


  • Create New...