DaveVegas Posted April 7, 2010 Share Posted April 7, 2010 Dear user, I recently made a new build. My specs: 6GB Crosair Ram Core i7 920 1xSSD (SATA II) HD 80GB 1xSATA II 500GB 1xSATA II 2TB MB: Asus P6T SE So, I used a guide to install snow leopard retail on this motherboard. So I boot from my usb stick and I get to the installation. Then I want to start disk utily but there are no drives to select. There is just my usb stick. I plugged the drives in and during boot I see them (When I press F8 I can choose between the drives). I dont know what to do. What can I do? Dave Link to comment https://www.insanelymac.com/forum/topic/214919-no-drives-to-select/ Share on other sites More sharing options...
DaveVegas Posted April 7, 2010 Author Share Posted April 7, 2010 I had a little problem with the panel earlier. Here is what I wanted to write: I recently got the new Asus P6T Se. After following this guide I came to the OS X installation window. The problem is that I dont see any harddrives. Either in Disk Utility nor in the selection window. Could you guys help me? Here are my specs: 6GB Ram (Crosair) Core i7 920 Asus P6T SE Harddrives: 1x SSD 80GB SATA II HD 1x SATA II HD 500GB 1x SATA II HD 2 TB So first of all i have to say that when I boot and I hit F8 for advanced boot options I can see all of the drives! So they must be pluged in correct. What else could be the problem? HELP! Dave Link to comment https://www.insanelymac.com/forum/topic/214919-no-drives-to-select/#findComment-1443566 Share on other sites More sharing options...
Recommended Posts