Jump to content
2 posts in this topic

Recommended Posts

moin,

seit ein paar tagen hab ich nur KP, nach der ursachenforschung kam raus, ein ram modul (von 4) ist wohl defekt, nur welches?

 

memtest:

Mac OS X 10.6.2 (10C540) running in single user mode
Memory Page Size: 4096
System has 2 Intel processor(s) with SSE
Requested memory: 2546MB (2670514176 bytes)
Available memory: 2546MB (2670514176 bytes)
NOTE: Memory request is too large, reducing to acceptable value...
Allocated memory: 2475MB (2595739776 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 1237MB (1297869888 bytes) starts at local address 0x0000000101000000
Buffer B: 1237MB (1297869888 bytes) starts at local address 0x000000014e5bec40

Running 1 test sequence... (CTRL-C to quit)

Test sequence 1 of 1:

Running tests on full 2475MB region...
 Stuck Address	   : setting  1 of 16
ok			  
 Linear PRN		  : ok			  
Running comparison tests using 1237MB buffers...
 Random Value		:	

FAILURE! Data mismatch at local BUFA address 0x0000000110de8000, BUFB address 0x000000015e3a6c40
BUFA Data: 0xf7ff1b01f7dbd7ec, BUFB Data: 0xffff1b01f7dbd7ec

 Compare XOR		 :	

FAILURE! Data mismatch at local BUFA address 0x0000000105257000, BUFB address 0x0000000152815c40
BUFA Data: 0xd106767fe343bcbd, BUFB Data: 0xd906767fe343bcbd

 Compare SUB		 : ok 
 Compare MUL		 :	

FAILURE! Data mismatch at local BUFA address 0x000000013eb7e000, BUFB address 0x000000018c13cc40
BUFA Data: 0x770add99e61a2bda, BUFB Data: 0x7f0add99e61a2bda

 Compare DIV		 : ok 
 Compare OR		  : ok 
 Compare AND		 : ok 
 Sequential Increment: ok 
 Solid Bits		  : ok			  
 Block Sequential	: ok				 
 Checkerboard		: ok			  
 Bit Spread		  : ok				
 Bit Flip			: ok				
 Walking Ones		: ok				
 Walking Zeroes	  : ok				

*** Memory Test Failed ***  Please check transcript for details.
Execution time: 1923 seconds.

Link to comment
https://www.insanelymac.com/forum/topic/213156-memtest/
Share on other sites

×
×
  • Create New...