Chdidi Posted March 14, 2010 Share Posted March 14, 2010 Hi everybody ! I'm currently runing on a perfect Leopard and everything works great but I wanted to try Snow Leopard. So I started searching install guides for SnowLeo Retail and found good ones but they were all talking about "dsdt.aml". I found that It was something like a map of your mobo and that it was the most important part of the SnowLeo install. But as my mobo is recent I can't find any good dsdt and extras for a chameleon install. I don't know where to search, I would create my own ones to make everything working better. Here are my specs: GA-EG41MF-US2H Intel Core 2 Duo E7600 3,06GHz Memory: 4GB 800MHz DDR2 SDRAM Graphics: nVidia 9600 GSO 384MO Audio: ALC888 Intel ICH7 Ethernet: Realtek RTL8111C If you need something more, just ask it ! Before all thanks and cheers from France ! Link to comment Share on other sites More sharing options...
Chdidi Posted March 17, 2010 Author Share Posted March 17, 2010 No idea ? Link to comment Share on other sites More sharing options...
motomorini Posted March 17, 2010 Share Posted March 17, 2010 No idea ? I used the Empire EFI boot disk to install, then Tonymacx86's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] found here: http://tonymacx86.blogspot.com/ His site is a good source not only for P55 boards. I have the G41 ES2H board and it worked well for me with the SL retail install disk. I still haven't finished setting it up- as sleep doesn't work- but it's been really easy so far. good luck - Link to comment Share on other sites More sharing options...
Chdidi Posted March 18, 2010 Author Share Posted March 18, 2010 I used the Empire EFI boot disk to install, then Tonymacx86's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] found here:http://tonymacx86.blogspot.com/ His site is a good source not only for P55 boards. I have the G41 ES2H board and it worked well for me with the SL retail install disk. I still haven't finished setting it up- as sleep doesn't work- but it's been really easy so far. good luck - Okay thanks ! You've got audio working ? You maked your own dsdt or have you found it ? Thanks again ! Link to comment Share on other sites More sharing options...
NLQ Posted March 20, 2010 Share Posted March 20, 2010 Okay thanks ! You've got audio working ? You maked your own dsdt or have you found it ? Thanks again ! Hi this board is fully(excl. onboard vga ) working!!! my configurations: Gigabyte GA-EG41MF-US2H 4 GB (2x2GB) DDR2 800 MHz RAM (buffalo) Core 2 Quad 9400 2,66 GHz Asus EN8400 GS 512MB 2x 500GB samsung HD502HJ hard disk Samsung sata DVD writer install method: Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard (10.6.2 SSE2/SSE3 Intel AMD (10C540)) options: - VoodooHDA - NvENABLER - Chameleon RC4 - ElliotForceLegacyRTC - OpenHaltRestart fully working without extra patch # BIOS version:F4. # PCB revision: 1.0. # Audio: Realtek ALC888 WORKING!! (but optical/spdif not tested) # LAN: Realtek 8111B, working 1Gbit # SATA/IDE: ICH7, Working (ide not tested) # Optical Drive: Working # Shutdown/restart: Working. # Sleep: WORKING! # HPET: Must be enabled, and set 64 bit # VGA: onboard intel vga not working, / asus EN8400GS 512MB (silent) Full working (dual monitor, rotate, etc) XBench pont: 183.21 http://db.xbench.com/merge.xhtml?doc2=433209 Link to comment Share on other sites More sharing options...
Chdidi Posted March 21, 2010 Author Share Posted March 21, 2010 Hi this board is fully(excl. onboard vga ) working!!! install method: Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard (10.6.2 SSE2/SSE3 Intel AMD (10C540)) Ouch, Kernel Panic ! Moreover can't find OpenHaltRestart on the install... thanks Link to comment Share on other sites More sharing options...
NLQ Posted March 23, 2010 Share Posted March 23, 2010 Ouch, Kernel Panic !Moreover can't find OpenHaltRestart on the install... thanks kernel panic: set bios Hpet 64 bit ??? openhaltrestart find the patches submenu http://www.leohazard.com/images/Final10.6.1-2.jpg Link to comment Share on other sites More sharing options...
MDA01 Posted May 7, 2010 Share Posted May 7, 2010 xcvbdsgfsdfgsdfg Hi this board is fully(excl. onboard vga ) working!!! my configurations: Gigabyte GA-EG41MF-US2H install method: Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard (10.6.2 SSE2/SSE3 Intel AMD (10C540)) options: - VoodooHDA - NvENABLER - Chameleon RC4 - ElliotForceLegacyRTC - OpenHaltRestart fully working without extra patch # BIOS version:F4. # PCB revision: 1.0. # Audio: Realtek ALC888 WORKING!! (but optical/spdif not tested) # LAN: Realtek 8111B, working 1Gbit # SATA/IDE: ICH7, Working (ide not tested) # Optical Drive: Working # Shutdown/restart: Working. # Sleep: WORKING! # HPET: Must be enabled, and set 64 bit # VGA: onboard intel vga not working, / asus EN8400GS 512MB (silent) Full working (dual monitor, rotate, etc) I tried this, with the Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard But i dont have the OpenHaltRestart, not even the Patches folder on the dvd. Now im getting the error after startup, grey screen telling me to reboot. Could 'OpenHaltRestart' really be the answer to this? Im using the same motherboard as you, and the settings described. Im downloading the snow leo from hazard them selves trought torrent right now, tried rapidshare but part05 is dead. I'll let you know if it works with OpenHaltRestart. If not i wasted 2 dvd's Link to comment Share on other sites More sharing options...
Recommended Posts