Rob_Quads Posted February 24, 2010 Share Posted February 24, 2010 I'm running 10.6.2 and got my 8800GTS nearly working. Below is the output of System Profiler Chipset Model: nVidia GeForce 8800 GTS Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x0193 Revision ID: 0x00a2 ROM Revision: nVidia GeForce 8800 GTS OpenGL Engine [EFI] Displays: DELL S2409W: Resolution: 1920 x 1080 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Rotation: Supported Display: Resolution: 1024 x 768 @ 75 Hz Pixel Depth: 32-Bit Color (ARGB8888) Mirror: Off Online: Yes Rotation: Supported To get this working I used the string EFI string in the com.apple.boot.plist. Annoyingly when I put the RC4 of Chameleon on it broke the graphics so I have had to go back to RC3. I did also try the GraphicsEnabler options in RC4 but they did not appear to work. SHould really try then in RC3 just out of interest. Any ideas what I need to do to get the QE/CI Acceleration working? Link to comment Share on other sites More sharing options...
onii Posted February 26, 2010 Share Posted February 26, 2010 I'm running 10.6.2 cham rc4 with 8800 and 8600 both working fine. Where did you get the efi string? The ones generated by efi studio don't always work, and caused KP on mine. netkas has a tut on this, with a default efi string u can customize. also your sig says you're using nvinject..if you're using efi strings you need to get rid of injectors. Link to comment Share on other sites More sharing options...
Recommended Posts