Resume from sleep takes 2.5 minutes

[ltoolio]

Hey all,

I have a largely functioning SL install (specs in my sig) with one small exception:

 

It take 2.5 minutes for my rig to resume from sleep. So, if I hit a key on the keyboard, the desktop pops up 2.5 minutes later. If I set auto-wake at 10:00, the desktop is displayed at 10:02:30 (all validated by kernel.log).

 

I'm working on patching my DSDT per the suggestion of Supermx3 and sweatyone (thanks again), but am having some issues deriving some of the necessary information I need via lspci, as detailed here.

 

I'll continue working through my DSDT work, but I'm curious if anyone else is having similar resume issues as I am. Anyone?

 

A sample of my kernel.log is shown below, and you will see that the machine was supposed to wake up at 18:20:00 but finally awoke at 18:22:32.

 

Jan 21 18:18:28 rks-Mac-Pro kernel[0]: System Sleep
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: Wake reason = RTC
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: RTC: alarm 2010/1/22 00:20:00, sleep 2010/1/22 00:18:28
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: System Wake
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: Previous Sleep Cause: 0
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: ring desc success: size->4096, virtual:4f2a2000, phy:1bb93000.
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: ring desc success: size->4096, virtual:4f2a3000, phy:1bb94000.
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: configure tx tdlen->4096.
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: configure rx rdlen->4096.
Jan 21 18:22:32 rks-Mac-Pro kernel[0]: enable success.
Jan 21 18:22:36 rks-Mac-Pro kernel[0]: Intel82566MM info: Link is Up 100 Mbps Half Duplex, Flow Control: None
Jan 21 18:23:31 rks-Mac-Pro kernel[0]: smb_iod_reconnect: Reconnected share VIDEOS with server homeserver
Jan 21 18:23:31 rks-Mac-Pro kernel[0]: smb_iod_reconnect: Reconnected share PHOTOS with server homeserver
Jan 21 18:23:31 rks-Mac-Pro kernel[0]: smb_iod_reconnect: Reconnected share SOFTWARE with server homeserver
Jan 21 18:24:55 rks-Mac-Pro kernel[0]: IOHIDSystem::relativePointerEventGated: VBL too high (23448430), capping to 20000000
Jan 21 19:09:59 rks-Mac-Pro kernel[0]: USBF:	18066. 97	AppleUSBEHCI[0xffffff8009832000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 2)
Jan 21 20:09:59 rks-Mac-Pro kernel[0]: USBF:	21666.142	AppleUSBEHCI[0xffffff8009832000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 2)
Jan 21 21:09:59 rks-Mac-Pro kernel[0]: USBF:	25266.174	AppleUSBEHCI[0xffffff8009832000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 2)

[ltoolio]

I figured I'd reply back to see if anyone had any other insight on this.

 

I have done some DSDT work, namely getting my AppleLPC to work properly (and the "Resume from power failure" checkbox is now available under the energy pref) and patching the DSDT per Formerly Known As.

 

Also:

- MSR tools indicates that Speedstep is running

- I've tried patching my DSDT with my nVidia card info per TonyMacx86, but the differences between his DSDT and mine have prevented me from getting a successful recompile

- I'm using a patched IOUSBFamily (per slice) to get my USB ports to be recognized as Built-in

 

But, the resume is still taking 2.5 mins

 

So...I'd love to hear any other thoughts that you might have as to what is causing such a long resume.

 

Thanks in advance,

LT