dima20202 Posted January 21, 2010 Share Posted January 21, 2010 I've tried to install "Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard", but it didn't work. It freezes on white screen with apple. What should I try? Or it is impossible to use this motherboard. Atom D510 , Intel GMA 3150 , Intel NM10 Express Chipset. http://www.intel.com/products/desktop/moth...MO-overview.htm Thanks. Dmitrij (RUSSIA). Beginner. Link to comment Share on other sites More sharing options...
Methanoid Posted January 29, 2010 Share Posted January 29, 2010 Depends what options you selected. Obviously it needs the Atom kernel but what other patches did you select? Link to comment Share on other sites More sharing options...
dima20202 Posted January 29, 2010 Author Share Posted January 29, 2010 Depends what options you selected. Obviously it needs the Atom kernel but what other patches did you select? No other patches was done, due to lack of experience. I guess, I should read more forums about Atoms. I just want to know, if it theoretically possible to make this new Atom work. May be someone experienced succeeded... Thanks. Link to comment Share on other sites More sharing options...
Methanoid Posted January 30, 2010 Share Posted January 30, 2010 Look for the D945GCLF2 guide and do the same as that and report back.. that mobo is identical except the VGA is now notionally GMA 3150. You'll probably have problems with VGA so skip their patches and stick to VESA for now. Link to comment Share on other sites More sharing options...
dima20202 Posted March 4, 2010 Author Share Posted March 4, 2010 I tried ideneb v1.6 OS10.5.8 but it does not even boot to installation procedures and shows error: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. I also used retail macOS 10.5 DVD and the same error happened. Also tried different bios settings. I guess CPU is the case. Link to comment Share on other sites More sharing options...
Zero2Cool Posted March 5, 2010 Share Posted March 5, 2010 I tried with ideneb and kallaway and didn't have much luck either, it gets hung what looks like a hard drive issue. Link to comment Share on other sites More sharing options...
thebias Posted April 10, 2010 Share Posted April 10, 2010 I tried with ideneb and kallaway and didn't have much luck either, it gets hung what looks like a hard drive issue. Did you change bios settings? I had a few problems with my upgrade on the 330 until I changed the settings. I am assuming the bios is similar. Try following the directions in the first post here http://www.insanelymac.com/forum/index.php?showtopic=183637 and then read the last few pages for other info. Link to comment Share on other sites More sharing options...
rumagent Posted May 26, 2010 Share Posted May 26, 2010 Did you ever get it to work? Link to comment Share on other sites More sharing options...
dima20202 Posted May 26, 2010 Author Share Posted May 26, 2010 Did you ever get it to work? No! I stopped trying. Link to comment Share on other sites More sharing options...
Alexander Breeze(RUSSIA) Posted June 13, 2010 Share Posted June 13, 2010 I've tried to install "Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard", but it didn't work. It freezes on white screen with apple.What should I try? Or it is impossible to use this motherboard. Atom D510 , Intel GMA 3150 , Intel NM10 Express Chipset. http://www.intel.com/products/desktop/moth...MO-overview.htm Thanks. Dmitrij (RUSSIA). Beginner. Try iDeneb v1.4 10.5.6, but without GMA3150 CL/QE, works good. Before installing you must activate AHCI mode for IDE in BIOS. Install it on the second partition of the Hard Drive, after that you can be enable install Snow Leopard 10.6.0 or 10.5.6-legal version directly from Hard Drive,it takes some 20 min., but it seems to me 10.5.6 works better with this motherboard. Link to comment Share on other sites More sharing options...
my2cents Posted June 13, 2010 Share Posted June 13, 2010 Has anyone tried to use mechdrew's NBI method on this mobo combo? I have successfully used method #3 ( http://osx.mechdrew.com/guides/nbi3.shtml ) to install a retail 10.6 DVD onto my D945gclf, and am thinking about upgrading... The latest NBI version 0.8.4 has GMA 3150 graphics support built in, but I don't know to what extent... ( http://www.meklort.com/ mar 6 2010 blog entry ). It should also have some 64 bit support... Link to comment Share on other sites More sharing options...
dima20202 Posted June 26, 2010 Author Share Posted June 26, 2010 Has anyone tried to use mechdrew's NBI method on this mobo combo? I have successfully used method #3 ( http://osx.mechdrew.com/guides/nbi3.shtml ) to install a retail 10.6 DVD onto my D945gclf, and am thinking about upgrading... The latest NBI version 0.8.4 has GMA 3150 graphics support built in, but I don't know to what extent... ( http://www.meklort.com/ mar 6 2010 blog entry ). It should also have some 64 bit support... I've tried methods 1 and 3 from "osx.mechdrew.com/guides". All failed.Method 1: I've made USB boot disc, but it didn't even see USB flash as bootable device. Method 3: bootCD starts, but freezes on some words like "cdboot loaded done" and nothing happens. I've also tried to boot from working hackintosh disk, but it doesn't recognize the hdd as bootable media. Try iDeneb v1.4 10.5.6, but without GMA3150 CL/QE, works good. Before installing you must activate AHCI mode for IDE in BIOS. Install it on the second partition of the Hard Drive, after that you can be enable install Snow Leopard 10.6.0 or 10.5.6-legal version directly from Hard Drive,it takes some 20 min., but it seems to me 10.5.6 works better with this motherboard. I've tried "iDeneb v1.4 10.5.6" but failed. Please, share your experience. Try iDeneb v1.4 10.5.6, but without GMA3150 CL/QE, works good. Before installing you must activate AHCI mode for IDE in BIOS. Install it on the second partition of the Hard Drive, after that you can be enable install Snow Leopard 10.6.0 or 10.5.6-legal version directly from Hard Drive,it takes some 20 min., but it seems to me 10.5.6 works better with this motherboard.I've tried "iDeneb v1.4 10.5.6" but failed. Please, share your experience. Link to comment Share on other sites More sharing options...
dima20202 Posted June 27, 2010 Author Share Posted June 27, 2010 I've tried "iDeneb v1.4 10.5.6" but failed, the error is "immediate dependencies on both com.apple.kernel and com.apple.kpi components, use only one style". It seems to me that this motherboard needs experienced/advanced installation! I stop trying to install Hackintosh on this motherboard. Link to comment Share on other sites More sharing options...
SpiegelEiXXL Posted July 29, 2010 Share Posted July 29, 2010 I do have the same problem, sadly Tried iATKOS_v7, iDeneb 1.4, iDeneb 1.6 and Kalyway (latest). The only symthomatics I get are the following: "Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style" or a "waiting for uuid" Combinations tried: iDeneb 1.* -> PCI iDeneb 1.* + -v cpus=1 -> PCI iDeneb 1.* + -v -x cpus=1 -> PCI iAKTOS v7 + -v -x cpus=1 -> PCI Kalyway => PCI Kalyway + modbinkernel => uuid Kalyway + modbinkernel -v cpus=1 platform=X86PC rd=disk debug=0x100 legacy => uuid Kalyway + modbinkernel -v -x -> PCI Switching BIOS "AHCI"-Mode from SATA to IDE causes uuid on most of those combinations aswell. Tried to install from a harddisk (copied ISO onto harddrive with dd under linux) and from a USB DVD Drive (HP dvd 840) cpus=1 or 2 didn't do anything, hyperthreading was deactivated, various USB ports were tried. I tried it with following harddrives: SAMSUNG HD501LJ SAMSUNG HD103UJ WDC WD20EADS-00R6B0 WD10EADS-11M2B2 (all SATA) side-infos: debnas:~# lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02) 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 01) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) debnas:~# uname -m x86_64 debnas:~# cat /proc/cpuinfo | grep flag | tail -n 1 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm debnas:~# dmidecode Handle 0x0000, DMI type 4, 35 bytes Processor Information Socket Designation: U1PR Type: Central Processor Family: Other Manufacturer: Intel(R) Corporation ID: CA 06 01 00 FF FB EB BF Version: Intel(R) Atom(TM) CPU D510 @ 1.66GHz Voltage: 1.1 V External Clock: 166 MHz Max Speed: 4000 MHz Current Speed: 1664 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0003 L2 Cache Handle: 0x0001 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified BIOS Information Vendor: Intel Corp. Version: MOPNV10J.86A.0175.2010.0308.0620 Release Date: 03/08/2010 debnas:~# free -m total used free shared buffers cached Mem: 3944 313 3630 0 123 105 -/+ buffers/cache: 85 3859 Swap: 980 0 980 (4G ram inside) Any help? Link to comment Share on other sites More sharing options...
drgw Posted April 1, 2011 Share Posted April 1, 2011 maybe a process i just used for a board i have which is just like this one might work I am using the ION G-E which also runs on the atom 330, it also hangs at the boot if trying to install osx using it. the process i used was to 1. get a sata/ide to usb (depends on which type your using) 2. install osx to that hard drive using a different computer that is at least able to boot into the install procedure using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or whatever boot device/disk you use. 3. using another mac (preferably) or hackintosh, install whatever combo update you want (only up to 10.6.6) 4. next you need to install these files to the disk using your mac/hackintosh (or pc using macdrive). this pack includes an Extra folder which is to be placed at the root of the drive, it also includes chameleon which has its own installer. 5. if you are using a mac or hackintosh you use theOSX86 Tools to install the corresponding kernel for whatever version of osx you have installed. you can find the kernel here. 6. now you reconnect the drive to your board and boot (make sure you set it to AHCI mode in the bios or else it wont boot) i hope this helps, i will be testing this at sometime in the future cause i also own a D510MO, i just currently dont have a hard drive or memory for it. so if someone else could try it and let me know if it works. Also please credit iba21 for the files and links I tried this last week, it doesn't work, sorry. Link to comment Share on other sites More sharing options...
Recommended Posts