TheBigBentley Posted June 30, 2006 Share Posted June 30, 2006 Okay I think im in the right thread since this problem is right after installing. So heres what i do. I have a small IBM Thinkcentre with osx JAS 10.4.3. Now this machince doesnt have a dvd drive so when installing i just borrowed the one in my main pc installed osx like a champ. After Install I removed the dvd drive and replaced it with my thinkcentre one. Now in OSX it wont read any disks. I Obvoiusly know there seems to be some kind of compatability issues here since my other drive works fine but i wanted to know if anyone else had encountered this and how they may have fixed it. Heres all the info on my drive. ATA Bus: LTN486S: Model: LTN486S Revision: YUS6 Serial Number: Detachable Drive: No Protocol: ATAPI Unit Number: 0 Socket Type: Internal Maxtor 6E040L0: Capacity: 38.29 GB Model: Maxtor 6E040L0 Revision: NAR61HA0 Serial Number: E17KXN0N Removable Media: No Detachable Drive: No BSD Name: disk0 Protocol: ATA Unit Number: 1 Socket Type: Internal OS9 Drivers: No S.M.A.R.T. status: Not Supported Volumes: MacOS X: Capacity: 38.29 GB Available: 22.28 GB Writable: Yes File System: Journaled HFS+ BSD Name: disk0s1 Mount Point: / Obviously the LTN is the CD Drive im refering to. Any help would be awsome. Link to comment Share on other sites More sharing options...
Recommended Posts