mark_slava Posted January 12, 2010 Share Posted January 12, 2010 здраствуйте уважаемые форумчане - может кто поможет советом с установкай даного релиза . Пробовал сделать так http://www.macpages.ru/pages/ustanovka-sno...0a432-gm-na-pc- не идет выбивает steel waiting for root device Install method like this - http://www.macpages.ru/pages/ustanovka-sno...10a432-gm-na-pc hardware : P5k -6550-8600gts-dvd on IDE and all other HDD in sata (snow leo HDD on a first SATA) before installation is clear. Now I have on the other HDD - Kalyway 10.5.4 and booting and start installation from here acroos OS Installer Acronis. This is what I see on my screen when booting ( sorry fo the bed photo ) http://fastpic.ru/view/1/2010/0112/9a8570a...368808.jpg.html http://fastpic.ru/view/1/2010/0112/8038f22...405520.jpg.html Link to comment https://www.insanelymac.com/forum/topic/206928-prblems-with-booting-snow-leopard/ Share on other sites More sharing options...
audit13 Posted January 13, 2010 Share Posted January 13, 2010 It looks like your installation is missing a driver for the hard disk controller. Are you hard drives in set up in ahci mode in the bios? Link to comment https://www.insanelymac.com/forum/topic/206928-prblems-with-booting-snow-leopard/#findComment-1383949 Share on other sites More sharing options...
MAC_PCer Posted January 13, 2010 Share Posted January 13, 2010 Anyone please help - spent several weeks on this. I have a similar problem as the first post: Mobo: Gigabyte GA-X48-GQ6 CPU: Intel Q8300 - Core 2 Quad Mobo IO sequence: IDE ch 0 Master None, IDE ch 0 Slave None IDE ch 1 Master None, IDE ch 1 Slave None IDE ch 2 Master None, IDE ch 3 Master None IDE ch 4 Master Standard IDE DVD, IDE ch 4 Standard WD IDE drive IDE ch 5 Master None, IDE ch 5 Slave None Few more bios settings in BIOS SATA RAID/AHCI Mode: [AHCI] (other IDE; RAID/IDE) SATA Port0-3 Native Mode: [Disabled] (other options Enabled) Onboard SATA/IDE Ctrl Mode: [AHCI] (other options IDE, RAID/IDE) I've tried installing iPC 10.5.6 PPF5 (default install) from internal IDE DVD or from external USB DVD and both times the same problem. When OSx boots: hd(0,1) OSX86 switches: -f -v I am noticing these questionable lines: Waiting for boot volume with UID 9244190B-xxx-xxx-xxx-xxxxxxxx (something like that) Waiting on <dict ID="0"<key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dist> and after Firewire message ongoing "Still waiting for root device" Link to comment https://www.insanelymac.com/forum/topic/206928-prblems-with-booting-snow-leopard/#findComment-1384024 Share on other sites More sharing options...
mark_slava Posted January 13, 2010 Author Share Posted January 13, 2010 It looks like your installation is missing a driver for the hard disk controller. Are you hard drives in set up in ahci mode in the bios? typicaly in BIOS my HD as IDE, but when I go to jmicron options table -I put AHCI option (on my MB - this is only one options with AHCI properties) Link to comment https://www.insanelymac.com/forum/topic/206928-prblems-with-booting-snow-leopard/#findComment-1384102 Share on other sites More sharing options...
audit13 Posted January 13, 2010 Share Posted January 13, 2010 You need to have all of the hard drives connected to the Intel controller operating in ahci mode. For added safety, connect the hard drive to sata port 1 or 2. Link to comment https://www.insanelymac.com/forum/topic/206928-prblems-with-booting-snow-leopard/#findComment-1384669 Share on other sites More sharing options...
Recommended Posts