ponchikles Posted January 9, 2010 Share Posted January 9, 2010 Hi i have a Gateway T-1620 with the next specs Processor: AMD Turion™ 64 X2 Mobile Technology TL-56 1.8 GHz | 512 KBx2 L2 Cache HyperTransport™ technology at up to 1600 MHz) Chipset: ATI RS690T Memory: 4gb DDR Hard drive: 250 GB 5400 RPM SATA hard drive ive tried with iatkos v7 but after the install i start the chameleon v2 and it gets me to a white mac screen and then it hangs and i tried with an ideneb disk too but it hangs in the first load after installation is my computer able to get mac?? what is better for me, ideneb, ipc, iatkos, kalyway?? Thx!! for ur help Link to comment https://www.insanelymac.com/forum/topic/206507-not-sure-how-to-customize-or-what-installer-to-use/ Share on other sites More sharing options...
Lanceomni Posted January 9, 2010 Share Posted January 9, 2010 Welcome to InsanelyMac! Thanks for the specifications. You can also place this information in your "Signature". It will then appear on every post you make. This can be done via My Controls: http://forum.insanelymac.com/index.php?act...rCP&CODE=00 Please follow the rules described in this thread (Most importantly keeping your signature to no more than 5 lines of normal text: http://forum.insanelymac.com/index.php?sho...p;hl=signatures Ideally you should boot in Verbose Mode until you have your machine running the way you want. This can be done by using the -v boot-flag. When you start the computer up you will see the Darwin bootloader screen. This screen will count down and by pressing the requested key will give you a prompt to enter these boot-options. Now instead of getting a gray screen with Apple logo, you will get useful information about the boot process and see at which line it hangs on. Did you make some notes as to which options you selected? Link to comment https://www.insanelymac.com/forum/topic/206507-not-sure-how-to-customize-or-what-installer-to-use/#findComment-1380858 Share on other sites More sharing options...
Recommended Posts