Woppi Posted December 14, 2009 Share Posted December 14, 2009 Hi, ich bin neu hier und habe ein Problem mit der Installation von Mac OSX 10.6 Snow Leopard auf meinem Fujitsu Siemens V5505 Notebook. Habe leider keine Anleitungen zur Installation auf diesem Notebook gefunden, aber weiß, das es eigentlich gehen müsste. Folgende Hardware: Intel Core 2 Duo T7300 2.00ghz 4MB Cache 2 GB 667mhz DDR2 RAM Intel 965 chipsetIntel ICH8-M SATA Controller Intel GMA X3100 Graphics Intel High Definition Audio Connextant chip Intel 4945 AGN Wifi Realtek 811B-GR NIC 10/100/1000 mbps Western Digital 250gb HDD Optiarc 7540A DVD-RW Habe mehrere Bootloader probiert. Der einzige der einigermaßen funktionierte war der EFI all in one V1.08. Allerdings startet die OSX Installation nur, wenn man das WLAN über den Schalter am Notebook deaktiviert. Nach Abschluss der Installation stellte ich dann fest, das sich WLAN nicht aktivieren lies. Auch der Sound funktionierte nicht. Zudem bekam ich es nicht hin, das Mac OSX von selbst startet, also ohne die Bootloader-CD. Kann mir jemand bei den Problemen helfen? Zur Installation hab ich eine orig. Mac OSX 10.6 DVD verwendet. Gruß, Woppi Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/ Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 * Wegen Booten, Chameleon 2 RC4 oder PCEFI v10.5 mit Installer installieren auf die OSX Partition, macht die Partition aktiv, oder wo lag dein Problem, es bootet von der OSX Partition nicht oder bleibt dann stehen? * Wegen Sound, lösch AppleHDA.kext und installier die neuste Version von VoodooHDA, 0.2.52 ow war es. *Wegen WLAN, es gibt keine Treiber für die Karte, lass es aus einfach. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358889 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Hab mit Chameleon den EFI Bootloader installiert. Hat nicht gebootet (nur ein Cursor hat geblinkt). Hab dann nen anderen Bootloader probiert (weiß nicht mehr welcher das war), der ist dann stehen geblieben beim start. Ok, ich probier das mal die Tage aus. Hab die Festplatte schon wieder formatiert und Windows drauf. Würde eine Installation auf eine externe USB Festplatte funktionieren? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358894 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Sollte gehen. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358896 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Installation auf eine exteren USB Festplatte hat geklappt. Allerdings bootet er mit der EFI V1.08 Boot-CD nicht. Ich muss mir erst ne andere Festplatte organisieren, die ich ins Notebook einbauen kann. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358936 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Auf OSX hast du dann kein zugriff? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358938 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Der EFI Bootloader zeigt die Externe Festplatte mit Mac OSX an. Beim starten von Snow Leopard bleibt er dann hängen (mit der internen Festplatte gings, allerdings kann ich die im moment nicht formatieren, da ich das Windows brauch) Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358941 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Hast du es als GUID Partitioniert? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358943 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 ja Formatiert als Journaled (Groß-Kleinschreibung) Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358944 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Und wo bleibt es hängen? Nach dem Bootloader, wo es ins VESA Mode umschaltet? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358947 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Kann ich nicht genau sagen. Es ist das EFI Logo zu sehen, und im Hintergrund läuft ein Text runter. Leider sieht man vom Text nicht viel, da das Logo einen weißen Hintergrund hat. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1358952 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Wenn du in Bootloader bist, dann drücke Tab um von dort in den üblichen Bootloader zu kommen und boote dann mit -v Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359016 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 hab ich gemacht. Hab mal ein Foto vom Bildschirm gemacht. Bild Nachdem Patched DMI Table bleibt er stehen. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359167 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Danach sollte es etwas über DSDT.aml sagen, geladen oder nicht gefunden ... , welches Bootloader hast du installiert, wohl nicht den was ohne DSDT.aml nicht geht? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359232 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Bootloader ist noch keiner installiert. Ich boote von CD. Ich komme ja ins OSX nicht rein Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359249 Share on other sites More sharing options...
riws Posted December 14, 2009 Share Posted December 14, 2009 Mit verschiedenen Bootoptionen probiert? Safe Mode? Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359264 Share on other sites More sharing options...
Woppi Posted December 14, 2009 Author Share Posted December 14, 2009 Safe Mode funktioniert auch nicht. Ich gebs auf. Ich brauch erst eine zweite Platte die ich ins Notebook einbauen kann und dann kann ich da vernünftig testen. Link to comment https://www.insanelymac.com/forum/topic/202264-snow-leopard-106-auf-fsc-v5505/#findComment-1359299 Share on other sites More sharing options...
Recommended Posts