bango Posted June 13, 2006 Share Posted June 13, 2006 Ringrazio chiunque fin d'ora per una risposta... Sul mio portatile ECS G736 (dopo incollo le caratteristiche...) ho provato ad installare ben tre distribuzioni dell'OSX86, la 10.4.4, la 10.4.5 e la 10.4.6 hot iso.... In tutte e tre mi fa l'installazione senza problemi, sia la standard che quella ad hoc, ma al momento del primo riavvio non succede assolutamente niente...o meglio...nelle prime due iso (.4 e.5) lampeggia solo un cursore e nient'altro, mentre per la 10.4.6 mi da il messaggio di errore h0 error.... Sono assolutamente un niubbo, ma ho provato a rendere attiva la partizione (nel dubbio non lo fosse...ma niente. Ho "piallato l'HD, per cui è bello vuoto, non ci sono altri sistemi operativi sopra a romper le balle.... Potete aiutarmi ? Grazie ancora Specification Processor Intel® Pentium® 4 processor supporting HT technology, 512KB L2 cache, FSB800MHz, up to 3.0GHz 478 pin FCPGA2 socket Core Logic SiS® 648FX + 963 Memory Expansion 2 slots of 200pin SO-DIMM DDR module, 1GB total memory capacity. 15.4" WSXGA+ (1680 x 1050) / 15.4" WXGA (1280 x 800) TFT LCD display Video & Graphics Graphic controller: ATi® MOBILITY™ RADEON™ 9600(M10) AGP 8X External 64/128MB Video RAM Hard Drive 9.5mm height, PATA support Fujitsu Optical Drive Combo Drive (DVD-ROM + CD-RW), DVD Dual (DVD+/-RW) AV Feature Built-in Audio DJ -- Control panel with LED display. Pointing Device Synaptics touchpad with scrolling button Interface Ports Left Side -- Kensington Lock, 2.0 USB port *2, 1394 port, PCMCIA Slot, Mic-in Jack, Audio Line Out -- LED Indicator: Battery Charge/ Suspend, Power On Right Side -- Modem port, DC in jack Rear Side -- Parallel port, VGA out port, TV Out (S Video) port, LAN port, IR port PCMCIA One Type II PCMCIA slot Audio AC'97 2.1, SPDIF out, 5.1 channel support Dual Full-duplex Direct Sound Channels Hardware SoundBlaster Pro for real-mode DOS legacy compatibility 18-bit ADC & DAC resolution, 16-bit Digitized audio playback BIOS AMI Support PnP, Master Password Bootable from USB FDD and Optical Device Communication Built-in wireless LAN antenna 10/100 Mbps Ethernet on board Built-in MDC V.90 56Kbps Fax/Modem 802.11b/802.11g USB WLAN card (optional) USB Connector Four USB2.0 ports, up to 480Mbit/s Power Management ACPI 2.0 compliance Support Stand-by, Suspend to Disk, Suspend to RAM Link to comment https://www.insanelymac.com/forum/topic/19694-buonasera-a-tuttiho-un-problema-stranomi-aiutate/ Share on other sites More sharing options...
LeCornutier Posted June 14, 2006 Share Posted June 14, 2006 Ciao, hai provato ad attivare la partizione? hai fatto regolarmente l'installazione, perciò non dovresti farlo, però io verificherei se la partizione è contrassegnata come "attiva". Se non lo è il sistema non tenta nemmeno di avviarsi. Infatti è strano che tu non riceva alcun messaggio di errore, nei primi due casi. Nel terzo caso, quando ti compare "h0 error" sembrerebbe che quantomeno il sistema prova ad avviarsi. Io non sono molto esperto di queste cose e ti posso dare il consiglio di cercare nella parte inglese nel forum. Inserisci gli eventuali messaggi di errore nella funzione "search" del forum, e vedi che spunta. C'è una sezione molto nutrita riguardo l'installazione di os x e probabilmente una soluzione al tuo problema è già stata trovata. Per vedere se la partizione è attiva, ti consiglierei di scaricare una versione live di linux, ovvero una versione di linux che si avvia completamente da cd, senza installare niente nel disco fisso. Ciao Link to comment https://www.insanelymac.com/forum/topic/19694-buonasera-a-tuttiho-un-problema-stranomi-aiutate/#findComment-129372 Share on other sites More sharing options...
cino Posted June 15, 2006 Share Posted June 15, 2006 Hai installato, o semplicemente copiato, la kernel per sse2? Magari il tuo processore non supporta sse3 Link to comment https://www.insanelymac.com/forum/topic/19694-buonasera-a-tuttiho-un-problema-stranomi-aiutate/#findComment-130298 Share on other sites More sharing options...
tomnic Posted June 16, 2006 Share Posted June 16, 2006 Ho praticamente il tuo stesso portatile, usa la Myzar 10.4.4/5, boota in modalità provvisoria (-x al prompt prima di avviare osx86), cancella AtiRadeon9700.kext (se non hai successo cancella tutti i kext che iniziano per ATI*) e dovresti riuscire a bootare in modalità normale tranquillamente... ...vedi un po' se anche a te capita quel fastidioso problema del finto dual display, in pratica spostando una finestra oltre la parte destra dello schermo questa mi riappare a sinistra, brutto bug, spero non capiti a te, io ci sto convivendo da sempre... ...mi hanno detto che probabilmente la JaS 10.4.6 fa al caso mio, fammi sapere casomai che la installo pure io! Ciaooo... Link to comment https://www.insanelymac.com/forum/topic/19694-buonasera-a-tuttiho-un-problema-stranomi-aiutate/#findComment-130406 Share on other sites More sharing options...
Recommended Posts