justgeeking Posted November 3, 2009 Share Posted November 3, 2009 If this helps others that need a quick setup Asus P5KPL-CM no bios flashed!!! E5200 dual core 2.5 In the sys info comes up as a iMac 2 gigs pny 250 sata n dvd DL sata Eithernet werking GeForce 9400 GT took out the safire hd 2600 pro pci e was giving blue blinking screens used 2 usb sticks one was 256 meg stick 2nd usb stick was a 8 gig i had restore my OSX dmg to the 8 gig did the hidden file then OSINSTALL mpkg Then Used the MyHack installer tried alot of diff version this one werks fine . Took out the winxp partition and did a staright install onto the main HD... well i tried many booters even the custum ones but the guy from the Myhack Blog had the one that werked for this board. Now will try the same method on my quad Hardware Hardware Overview: Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.58 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: IM81.00C1.B00 SMC Version (system): 1.30f3 Serial Number (system): SOMESRLNMBR Hardware UUID: 00000000-0000-1000-8000-00146C8ECD91 Grafs Chipset Model: Unknown Type: GPU Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x0641 Revision ID: 0x00a1 ROM Revision: xx.xx.xx - internal Displays: VA1912w-3: Resolution: 1152 x 864 @ 75 Hz Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Rotation: Supported Display Connector: Status: No Display Connected For My Sound FireWire Bus: Maximum Speed: Up to 400 Mb/sec Saffire: Manufacturer: Focusrite Model: 0x0 GUID: 0x130E01000113B3 Maximum Speed: Up to 400 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: Saffire Unit: Unit Software Version: 0x10001 Unit Spec ID: 0xA02D SATA HOOK UPS Maxtor 6Y250M0: Capacity: 251 GB (251,000,193,024 bytes) Model: Maxtor 6Y250M0 Revision: YAR51HW0 Serial Number: Y645S4CE Removable Media: No Detachable Drive: No BSD Name: disk0 Protocol: ata Unit Number: 0 Socket Type: Serial-ATA Partition Map Type: GPT (GUID Partition Table) S.M.A.R.T. status: Verified Volumes: Snow: Capacity: 250.66 GB (250,656,219,136 bytes) Available: 245.75 GB (245,751,328,768 bytes) Writable: Yes File System: Journaled HFS+ BSD Name: disk0s2 Mount Point: / TSSTcorp CDDVDW SH-S223B: Model: TSSTcorp CDDVDW SH-S223B Revision: SB02 Serial Number: Q9146GBS81710300 Detachable Drive: No Protocol: atapi Unit Number: 1 Socket Type: Serial-ATA Power Off: No Async Notification: No SYSTEM System Software Overview: System Version: Mac OS X 10.6.1 (10B504) Kernel Version: Darwin 10.0.0 Boot Volume: Snow Boot Mode: Normal Computer Name: SnowMAN’s iMac User Name: SnowMAN (snowman) Secure Virtual Memory: Not Enabled 64-bit Kernel and Extensions: No I hope this helps out a few people Thanks to all on here that have helped out especially guys like me Just Geeking P.S repair your permissions Time since boot: 23 minutes Link to comment https://www.insanelymac.com/forum/topic/195572-asus-p5kpl-cm-sl-1061/ Share on other sites More sharing options...
hdcwr0x2 Posted November 3, 2009 Share Posted November 3, 2009 I have this motherboard too. Can you be more specific about which files and bootloader are required? Thanks. Link to comment https://www.insanelymac.com/forum/topic/195572-asus-p5kpl-cm-sl-1061/#findComment-1318884 Share on other sites More sharing options...
justgeeking Posted November 3, 2009 Author Share Posted November 3, 2009 http://osx86.sojugarden.com/ this the only place that made that board come to life very simple and easy Link to comment https://www.insanelymac.com/forum/topic/195572-asus-p5kpl-cm-sl-1061/#findComment-1319191 Share on other sites More sharing options...
DaMm Posted November 12, 2009 Share Posted November 12, 2009 I have the same motherboard , processor and grafics card configuration as yours. Intel E5200 Dual Core 2 GB RAM KIngston 250 GB SATA HDISK NVIDIA GEFORCE 9400 GT and ASUS P5KPL-CM.. How did you proceed with the installation.. last ime i tried .. it got freezed up during boot up after setup... Thank you.... Link to comment https://www.insanelymac.com/forum/topic/195572-asus-p5kpl-cm-sl-1061/#findComment-1328084 Share on other sites More sharing options...
Lamthalas Posted November 12, 2009 Share Posted November 12, 2009 Try turn off IDE controllers, use SATA CD/DVD to install from SL DVD. Use Chameleon 2.0RC2 with PC EFI v10.5 boot file as bootloader. Kexts needed: FakeSmc v2 OpenHaltRestart NullCPUPowerManagement or Disabler - either one should works AttansicL1eEthernet - you might have to install it straight to S/L/E, use Kext Utility to install it. You can download both PC EFI and FakeSmc from http://netkas.org and Network driver from http://www.kexts.com/view/111-attansicl1ee...ow_leopard.html. Good luck! Link to comment https://www.insanelymac.com/forum/topic/195572-asus-p5kpl-cm-sl-1061/#findComment-1328164 Share on other sites More sharing options...
Recommended Posts