[Solved] ANALOG OUT OF RANGE 74,9kHz/60Hz

[Eosan]

Hey,

I already readed much guides and tryed diffrent ways but after i restart and try to boot from the Installation DVD or frome a prepared HD nothing is happaning it just looks like this :

 

First of all My System :

Motherboard : Asus P5Q-E

CPU : Intel Core 2 Duo 3Ghz

Ram : 4 GB DDR2 1066 Corsair Dominater Ram

Grafik : Gainward ATI HD 4870 1GB Golden Sample

Harddrive : Maxtor 250 GB Sata

 

 

What i already tried :

 

Nr 1.

I burned the iATKOS_v7.iso on a DvD and Restartet my PC and tryed to boot frome it but nothing happend just the Black Screen. I waitet like 10 Minutes but still nothing.

 

Nr 2.

I followed this guide here downloaded the 2001-BIOS-Asus_P5Q_E_for_MAC_OS_X_&_all_OS__incl._by_Juzzi..ROM.zip Bios and Flashed it.

I used all this Bios Settings :

• Main
  • Storage information
    • Configure SATA as: AHCI
      
    • HD write protect: Disabled
      
    • IDE detect time out: 0
      

    [*]AHCI configuration

    • CD/DVD time out: 0
      

  [*]AI Tweaker (I am using DDR2-1066): set dram timing control as manual: 5-5-5-15-3-52-6-3

  [*]Advanced

  • Onboard devices conf
    • HD Audio: Enabled
      
    • Front panel type: HD Audio
      
    • Marvel IDE: Disabled
      
    • Marvel LAN1: Enabled (associated LAN BOOT ROM: Disabled)
      
    • Marvel LAN2: Enabled (associated LAN BOOT ROM: Disabled)
      
    • LSI Firewire: Enabled
      
    • Serial port: Disabled
      

    [*]USB Configuration

    • USB: Enabled
      
    • 2.0 Controller: Enabled
      
    • 2.0 Controller mode: HiSpeed
      
    • EHCI Hand off: Enabled
      
    • Legacy support: Auto
      

    [*]Plug & Play: Yes

  [*]Power

  • Suspend mode: auto
    
  • Report Video: no
    
  • ACPI 2.0 support: Enabled
    
  • APIC support: Enabled
    
  • APM Configuration
    • Power off, everything disabled
      

I did Everything on the Guide till Step

5. Install

 

 

5.1. Burn the IDeneb ISO onto a DVD-R or DVD-RW.

 

5.2. Instal IDeneb on the 2nd section from the left.

 

But same thing like on my first try with Iatkos v7, nothing happens just the black Screen with the blinking _

 

Nr. 3

I thougt maybe my DVD Burner is not working right so i tried this guide here with the Leopard HD install helper. Did everything like in the guide explained. I used Leo4allv3.iso and let it copy to my first Partition from Leopard HD install Helper. After that i checkt the Partion ID was AF and active. Everything was right. then i rebootet and tryed to boot from the Harddisk but same thing like in try 1 and 2 just the Black Screen with the blinking _

 

Nr. 4

I tried all 3 iso images (the iatkosv7.iso the iDeneb_v1.4_10.5.6.iso and the Leo4Allv3.iso) in VMWare Workstation 6.5, they all bootet fine with busratio=20 and cpus=1.

 

Anyone got an Idea what could be wrong, maybe i should by a new DVD Burner because that one is a old one and maybe not working right. But the Harddisk try did the same thing so it could be something else.

[Eosan]

Alright the problem was my old DVD Writer, bougt a new on yesterday now i got iatkos v7 working on my system but i want to install snow leopard, but always when i try to boot up the snow leopard installation my 22" LG Flatscreen says :

 

ANALOG

OUT OF RANGE

74,9kHz/60Hz

 

I already tried a other Monitor but same thing.

[Eosan]

Solved it. I had to change

From :

<key>Graphics Mode</key>

<string>1600x1000x32</string>

To :

<key>Graphics Mode</key>

<string>1024x768x32</string>

 

 

Now I got Snow Leopard fully working on My System :

Sound works, PS2 Keyboard Works, 1 of 2 Onboard Network Ports Works, ATI HD Raedon HD 4870 works with second DVI port and Resolution: 1680 x 1050 @ 60 Hz