Hp mini 1000 iDeneb adventure

[djj3w]

Hello all! I just traded my Core2Duo 2.66 hackintosh for an Intel atom 1.6 hp mini 1000. I am a DJ and was in need of a more mobile option. Anyways... I am re downloading iDeneb 1.3 because everyone is saying that it's almost an effortless install ( i have the mini 1116nr). I had a copy of iDeneb 1.5 on hand and tried that. Reboot loop. Install qoopz kernel ichx fix and hp mini 1000 pkg as well as a terminal install ( after initial install) of the ACPI-fix from 1.3. Now i am at the loginwindow.app loop... Farthest i'vr gotten. Anyone get it completely installed? Or just wipe and install 1.3? It is downloading at the moment 3 hrs left. Thanks!!

[bigboysac]

Hello all! I just traded my Core2Duo 2.66 hackintosh for an Intel atom 1.6 hp mini 1000. I am a DJ and was in need of a more mobile option. Anyways... I am re downloading iDeneb 1.3 because everyone is saying that it's almost an effortless install ( i have the mini 1116nr). I had a copy of iDeneb 1.5 on hand and tried that. Reboot loop. Install qoopz kernel ichx fix and hp mini 1000 pkg as well as a terminal install ( after initial install) of the ACPI-fix from 1.3. Now i am at the loginwindow.app loop... Farthest i'vr gotten. Anyone get it completely installed? Or just wipe and install 1.3? It is downloading at the moment 3 hrs left. Thanks!!

 

 

I just installed iatkos v7 on my brand new mini 1116nr. Here are the steps i used

Windows via USB Drive (tested in Windows XP)

1. Hook up your external Hard-Drive to your computer. Go to Start and right click on My Computer. Click Manage. On the left side, go to Disk Management.

2. Click on your External Hard-Drive. Then click 'Delete'.THIS WILL DELETE EVERYTHING ON THE EXTERNAL HARD-DRIVE!. Once that is complete, go to Start and right click on My Computer. Click Manage. On the left side, go to Disk Management. Once again, click on your External Hard-Drive.

3. Click on 'Format'. Click next, and make sure you set the partition size to about 6GB.

4. Let it finish, then download the file linked 5 lines below. It is a handy utility for Windows that will help you put iATKOS v7 on an external Hard-Drive. Open the file and click 'ddmac' and English_GUI. On 'ddmac', don't be alarmed if it looks strange (this is why you need the English_GUI).

5. Follow the instructions in the English_GUI on the ddmac. It is pretty straightforward. Click the start button, and let it do its thing. DO NOT CLICK THE DDMAC! I have found that if you click it, it messes up.

6. After that, reboot your mini, and press f9. Select your External Hard-Drive, and hit enter.

link for software (ddmac) http://www.insanelymac.com/forum/index.php...st&id=51804

Installing OS X

From this point on, everything on your mini is about to be erased. Say goodbye to XP/Linux Mi or whatever it's called. It's worth it in the end I promise.

If you do not follow my instructions on this next step iATKOS v7 will panic when trying to boot.

Plug in your now bootable OS X Flash Drive, USB DVD, or USB HDD (depend on what medium your using for the install) Turn on the mini and press F9. Now select the Flash Drive, USB DVD, or USB HDD you want to install from and keep pressing F8 and hit enter. If you do not keep pressing F8 you will white screen with an apple logo and then the system will reboot so make sure you keep pressing F8 when booting off of your drive! you should see a command line with boot:

now at the command line with boot: type cpus=1

it should look like this boot: cpus=1

then hit enter and you should boot into the OS X installer pretty fast if your installing from a flash drive. You can also use the -v command before cpus=1 this will show you any messages if you need to figure out what went wrong (if anything went wrong) Example: boot: -v cpus=1

If you get a panic and the system reboots or your stuck at a white screen with a circle with a slash going through it, just reboot and try again. I would recommend using the Flash Drive install method! I have had issues with external DVD drives during installs of OS X.

 

1. The installer will now begin. Wait at the apple logo until a language selection screen is shown. Select your language and hit next.

2. Go to the top of the screen where it says utilities. From this menu select "Disk Utility"

3. Click on the Mini's Hard drive in the left pane.

4. Click on the "erase" tab

5. Under Volume format, select Mac OS Extended

6. Click Erase

(NOTE: If you plan on ever dual booting or wanting partitions on your drive, now is the time to do it. You wont be able to partition/resize your drive after the install. If you would like to dual boot, go to the partition tab on you HD, and click the + button. Add a partition any size you like and assign it as "Free Space". You can format it later)

7. After erasing is complete, exit the disk utility

8. Now click next and select your newly erased hard drive as the destination.

9.On the next screen you will see an option at the bottom that says "customize". Click on it and apply the following patches:

a. Expand "x86 patches" and select: OHR

b. Expand "Driver" Expand "System" Expand SATA/IDE check Intel SATA/IDE Close "System"

c. With "Driver" still expanded check USB

e. Expand PS/2 Mouse/Keyboard check Voodoo PS/2 Driver With Trackpad

d. With "Driver" still expanded check Laptop Battery, and NTFS - 3G

f. Expand "Network" Expand "Wireless" check Broadcom BCM43xx

 

That's it you can now continue with the installation.

 

Install will take about 15 mins. your computer will reboot when the install is finished.

Once the install is finished you will have a nice new shinny boot screen =) this is chameleon 2.1 RC you should see the Chameleon on top =)

At this point everything will work out of the box but the screen will be stuck in 800x600 with no selection for other resolutions yet so we will fix this in advance (or at least prepare to install proper video drivers)

 

You can also boot into OS X at this time first if you want to setup your account first then follow the steps below

 

So now that OS X is installed when the mini reboots and you see the Chameleon boot loader. press any key to enter setup.

now type -s you should see boot: -s on the bottom left hand side of the screen, now press enter and it should boot you into single user mode.

with you get the command prompt it will look like this:

:/ root#

now type /sbin/fsck -fy and press enter

after it does its thing type: /sbin/mount -uw / and press enter

don't forget that / after -uw or you will not have write access.

 

Do Exactly as I say or you will hate life =)

Type: cd System/Library and press enter

Type: rm -r Extensions.mkext and press enter

Type: cd Extensions and press enter

Type: rm -r AppleIntelGMA*.* and press enter

Type: rm -r AppleIntelIntergrated*.* press tab and it will fill in the rest for you and press enter

Type: shutdown -r now

This will remove the kext cache and all of the Intel Graphic drivers because they do not work correctly (stuck at 800x600) and the system should now reboot. If all went well you should be at the screen to enter in all of your info and user account =)

 

Once you are at the desktop of OS X you can now install the video drivers from the Display Package I put together (I take no credit for the actual Drivers)

here is the link again:

Display_iAtkos_v7.zip ( 353K ) Number of downloads: 1365

 

and OSXTools OSXTools 1.0.150

 

You can download them directly or download them on another computer and put the files on a flash drive, just make sure to copy them to the Desktop to make things easier.

Once you extract The Display Package to the Desktop you should have these folders:

OSXTools1.0.150

First

Second

 

Now Start OSXTools and click install kexts

browse to the dir First and select all (3) kexts

and click install.

After the kexts instal with will pop up asking to reboot DO NOT REBOOT!!!!!!!!!!!!!!!

if you reboot you will have to go into single user mode again and remove all the files again SO DO NOT REBOOT YET! CLICK CANCEL

Now open the folder Second and click on GMA950.pkg and a setup window will pop up.

click continue, click install put in your password if you have one and proceed. after the install you can now reboot.

 

Once you reboot you should be back at the OS X desktop but now with working 1024x600 resolution! you can now enable Quartz.

 

Enable Quartz

To enable Quartz open OSX86 Tools and click the Enable/Disable Quartz GL button. It will tell you the current status. If its disabled, feel free to enable it by clicking the button that says "Enable Quartz GL". after Quartz is enables the system will need to rebooted.

 

You should now be fully working on OS X 10.5.7

You can also update from the Software Update by click on the apple logo on the top left.

Make Sure you UNCHECK AirPort Utility Software Update or you will be left without a Wireless Connection! if you wind up updating AirPort Utility Software Update you will have to track down the BCM43xx kext and reinstall it. but make life easy and uncheck AirPort Utility Software Update.

 

I have noticed something about the voodoo sound driver, although you have sound and you can even adjust the sound with the function keys the sound level stays the same, but you can set the sound level in setting/voodooHDA and just set the volume level by sliding the PCM slider. if anyone can figure out a fix for this please post it =)

 

This is the most foolproof install of OS X 10.5.7 if its not working for you your not following this guide 100% if you have any questions I will try to answer them quickly. It took me quite a while to work out all the kinks of the install to get everything working perfectly so enjoy =)

 

 

if you have any questions, pm me and i will help you out

[djj3w]

Yes! I just got everything running last night. Installed iDeneb 1.5, applied all kexts and got everything working. Then I applied the DSDT Patch and used the ideneb 10.5.8 update kit. now EVERYTHING works PERFECT now xcept for mounting external devices. DMGs and ISO work fine but anything on usb bus will not mount even at boot. Tried IOUSBFAmioly.kext from HP Mini essential Files... Nothing. Tried USBEHCI and everything. help from here? THAnkS!