Jump to content
1 post in this topic

Recommended Posts

Spec:

Motherboard description

Motherboard manufacturer's name: Asus M2N68-LA

HP/Compaq name: Narra2-GL8E

CPU/Processor

Socket: AM2

Supports the following processors:

Athlon 64 X2 with Dual Core technology up to 5600+ (up to 89 watt)

Athlon 64 less than 4000+

Sempron less than 3800+

Front-side bus (FSB)

2000MT/s (2.0 GT/s)

Chipset

NVIDIA GeForce 6150SE nForce 430

BIOS features

System BIOS core brand: Award

Keyboard combination to used to enter BIOS: F10

Form factor

Micro-ATX: 9.6 in X 9.6 in

Memory

Dual channel memory architecture

Four 240-pin DDR2 DIMM sockets

Supported DIMM types:

PC2-4200 (533 MHz)

PC2-5300 (667 MHz)

PC2-6400 (800 MHz)

Non-ECC memory only, unbuffered

supports 2GB DDR2 DIMMs

Supports up to 8 GB on 64 bit PCs

Supports up to 4 GB* on 32 bit PCs

 

 

NOTE: *Actual available memory may be less

Expansion slots

Two PCI

One PCI Express x16 graphics (for a graphics card)

One PCI Express x1 (for cards such as network, sound, tv-tuner)

Video graphics

Integrated graphics using nVidia GeForce 6150SE

Up to 256MB (with 512MB or more PC memory)

Also supports PCI Express x16 graphics cards*

 

 

NOTE: *Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.

Parallel ATA

One 40-pin UltraDMA 100/66/33 connector

Supports PIO, multi-word DMA modes

Supports two PATA disk drives on one PATA ribbon cable (two drives total)

Serial ATA

Four SATA connectors:

SATA1 = Black

SATA2 = White

SATA3 = Blue

SATA4 = Yellow

 

 

Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector

Speed up to 1.5Gb/sec or 3.0Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications

 

 

NOTE: The faster rate of 3.0Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec.

RAID

Some Narra2 models ship with RAID (model dependent)

nVidia's onboard RAID solution is called nVidia MediaShield Storage

RAID modes supported*:

RAID 0

RAID 1

 

 

NOTE: RAID 5 and 10 are not supported by this motherboard.

Onboard audio

8 channel high-definition audio

Audio CODEC: ALC888S

Onboard LAN

PCI Realtek RTL8201N 10/100 Mbps LAN PHY

Onboard USB

USB 2.0

Ten ports total

Four connectors on back panel

additional headers on motherboard support 6 additional ports/devices

 

 

NOTE: Some USB ports may not be available externally for customer use. For more information, see model specifications.

Onboard 1394

Type: IEEE 1394a 400Mb/s

Agere LFW3226-100 (or equivalent) controller chip

Two ports total

One port on back panel

One header on motherboard supporting one additional port/device

Back panel I/0

One PS/2 mouse port (green)

One PS/2 keyboard port (purple)

One Coaxial SPDIF out port

One VGA port

Four USB 2.0

One IEEE 1394a

One RJ-45 networking port

Six audio ports support 8-channel audio:

Line-in (light blue)

Microphone-in (pink)

Line-out (lime)

Center/Subwoofer-out (yellow-orange)

Side speaker-out (gray)

Rear speaker-out (black)

Internal connectors

One 24-pin ATX power connector

One 4-pin ATX power connector

One PATA connector

Four SATA connectors

One floppy drive connector

Two 12v fan connectors for CPU fan and PC fan

One 9-pin header for power button, reset button, power LED, and HDD LED

One SPDIF digital audio output header

One front line input connector (interrupts line input on back panel, Vista capable, requires matching front audio jack module)

One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module)

Four USB headers supporting 6 additional USB 2.0 ports or devices

One 1394a header

One Intel high-definition Audio/Modem Link (not used by HP)

One jumper for resetting BIOS settings

One jumper to disable BIOS password checking

 

 

 

I tried kalyway 10.5.2 and iAtkos both don't even bother to load cause I got an "still waiting for root device"

 

 

please help me

×
×
  • Create New...