sgaugs Posted October 9, 2009 Share Posted October 9, 2009 I'm very new to all of this mac stuff but I'm learning. I'm trying to put iDeneb 1.5.1 on either a Toshiba Satellite A135-S4437, or a computer that i recently built. iDeneb 1.5.1 tends to install fine on the custom PC that I built but it doesn't want to boot the OS after install. I usually get an error about the "Fsevens filter failed [44]. The Toshiba won't even run the iDeneb 1.5.1 OS DVD, I get a Read and Write error. I don't know if there's so sort of trick to it or if i'm not selecting the proper drivers. Would selecting more that one driver for the same device cause some of this? What should I do? Toshiba A135-S4437: Intel Core Duo T2250 (1.73 GHz) 2 GB DDR2 PC2-4300 (266MHz) Intel i945GM Express Chipset Realtek RTL8101E PCI-E Ethernet Intel PRO/Wireless 3945ABG Wireless card Pioneer DVD-RW DVR-K17A ATA Intel 82801G USB2 Realtek High Definition Audio Custom computer: GIGABYTE GA-MA770T-UD3P Motherboard AMD Phenom II X3 2.8 PNY 4 GB DDR3 PC3-10666 (1333MHz) AMD 770 Chipset Nvidia 9400GT 512MB PCI-E 2.0 Graphics Realtek RTL8111C/D Lan Chip Realtek ALC888 Audio Controllers for USB and a majority of everything else are ATI. Link to comment https://www.insanelymac.com/forum/topic/191377-ideneb-151-1057-installation-issues/ Share on other sites More sharing options...
Recommended Posts