Jump to content

NC10 Driver Thread - 10.6.6 Please contribute

roninx

By roninx,
in OSx86 10.6 (Snow Leopard)

 Share
23 posts in this topic

Recommended Posts

roninx
roninx
Posted
Posted

Update 1/16/2011

Files Added for 10.6.6

 

Sorry about the long wait.. I won't be around for much longer, but I'm forking over these drivers to you guys. You've been probably going a long time without them much like myself.

 

Took me a whole day to find this shît so please mention my efforts (only in collecting these) if you're going to pass it on elsewhere. Thanks guys.

 

Mirror: http://www.mediafire.com/?qzbdqweapdwac7v

 

Intel GMA 950:

 

Chipset Model: GMA 950

Type: GPU

Bus: Built-In

VRAM (Total): 64 MB of Shared System Memory

Vendor: Intel (0x8086)

Device ID: 0x27ae

Revision ID: 0x0003

Displays:

Display:

Resolution: 1024 x 600

Pixel Depth: 32-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

Built-In: Yes

VL1715:

Resolution: 1280 x 1024 @ 60 Hz

Pixel Depth: 32-Bit Color (ARGB8888)

Mirror: Off

Online: Yes

Rotation: Supported

 

Older Files

 

Attached are zip packages for 10.6.0, 10.6.1, and 10.6.2

 

10.6.6 Package link above due to attachment size constraints

 

Samsung Rules

NC10_IntelGMA950_RoninX.zip

Ronin_X___Driver_Updates___10.6.2.zip

roninx
roninx
Posted
  • Author
Posted

I'm attaching what drivers i have to make this pretty much a fully functional system.

 

NC10 SL Setup Final-RoninX

- Audio

- AzaliaAudio.pkg

- Boot Kext

- fakesmc.kext

- IOAHCIBlockStorageInjector.kext

- NullCPUPowerManagement.kext

- OpenHaltRestart.kext

- UUID.kext

- Ethernet

- skge.kext

- GFX

- v10.6.0 (Working)

- AppleIntelGMA950.kext

- AppleIntelGMA950GA.plugin

- AppleIntelGMA950GLDriver.bundle

- AppleIntelGMA950VADriver.bundle

- AppleIntelIntegratedFramebuffer.kext

- v10.6.1 (Working)

- AppleIntelGMA950.kext

- AppleIntelIntegratedFramebuffer.kext

-PS2

- VoodooPS2Controller-0.98-installer.pkg

- SystemConfiguration

- com.apple.Boot.plist

- Utilities

- HexEdit.app

- KextHelper b7.app

 

Note: 10.6.0 graphics do not have transparency for some reason

however this should not matter, upgrading from 10.6.0 to 10.6.1 was painless and caused no problems.

it's just that the 10.6.1 kexts must be installed. those are the drivers that work fully.

 

I spent a lot of time on this. Mystique mac and a lot of insanelymac was of no help.

comments or thanks are always welcome.

 

Enjoy

PART_1.zip

PART_2.zip

ubersoldat2000
ubersoldat2000
Posted
Posted

nice one roninx,

 

i am also running a fully functional 10.6.1 on my NC10, except for brightness control via fn+F12/Ins.

 

did you get that to work as well? if so, you may claim a crate of beer from me ( and i live in munich ;-)

 

uber

roninx
roninx
Posted
  • Author
Posted
Which method have u used for installing?

 

Everything working on the NC10?

 

 

well it was hard at first because i'd have to physically remove my 2.5" sata drive to test it and hot-swap, but basically there was this bootcd available. it was really useful but i don't have the link at the moment.

 

what you can do is plug in the sata drive to a working platform and run the retail install disk (non-osx86 disk)

 

note: the goldmaster whatever {censored} sucked. it barely worked for the most compatible hackintosh platform out there

 

format your 2.5" drive with a single GUID partition

 

show the hidden files in the install disk and run

OSInstall.mpkg

from /System/Installation/Packages/

 

select your 2.5" drive as the install location and be careful not to select your root drive

 

let that run, if it says failed, ignore it, apple got lazy.

 

run the chameleon rc2 base installer (included here) and replace the boot file with the one i'm including here in the root of the partition

 

if you can try to use osx86 tools to install the basic boot kexts (in Boot Kexts folder in the previous attachment)

to your specified 2.5"

 

boot off of it with whichever bootflags are necessary, i found -f helped me through things

 

in the setup the ps2 probably won't work so plug in some sort of usb mouse (keyboard works i believe)

 

leave your netbook case open, so you can hot-swap the drive to a working hackintosh if needed.

 

in the setup just enter your information and start installing the other kexts

 

 

 

nice one roninx,

 

i am also running a fully functional 10.6.1 on my NC10, except for brightness control via fn+F12/Ins.

 

did you get that to work as well? if so, you may claim a crate of beer from me ( and i live in munich ;-)

 

uber

 

jawohl, bayerische bier schmeckt aber gut.

 

gerade wohne ich in den USA. Scheißtag!

 

back to english (because of computer jargon) haha. so when you boot the machine what i've tried doing is doing the fn+f12 keys at the samsung splash screen.

 

over at mystiquemac forums, a russian enthusiast, tea has claimed to have gotten his working.

 

leider kann ich nicht sagen, ob es funktioniert.

Boot_Files.zip

roninx
roninx
Posted
  • Author
Posted
I have a big question for you, the original wifi card works without problems?

 

Thanks

 

switch it out, atheros makes {censored} to begin with. i've wasted countless hours trying to find drivers that didn't work and a bunch of dumbasses used kismac wifi stumbler and it just doesn't work.

 

try the Dell Wireless 1490 A/G

(BCM94311MCAG)

 

works out of the box. order from dell online or ebay or whatever.

  • 2 weeks later...
Tastenmeister
Tastenmeister
Posted
Posted

Hi RoninX,

 

I used your Drivers for my NC10 to get my Snowleo running, but the azalia audio driver doesn't work for me.

 

Any idea what I can try?

 

All the best - Tastenmeister

 

P.S.: I didn't use the VoodooPS2Controller, because I had in earlier times a KP, but Keyboard and Trackpad workgs fine.

skim32
skim32
Posted
Posted
I have a big question for you, the original wifi card works without problems?

 

Thanks

 

If you have the intel wireless card, it won't work and there are no drivers as far as I know. I recommend trying the Dell 1490 Card. They are supposed to work out of box. I just picked one up for 7 bucks on ebay. If you look hard enough, you can probably get a good deal on a Dell 1500 card.. which supports Draft N out of box. The only thing to note about the 1490 is that it only supports 802.11a/g. No b. But who needs B anyways. The following is an ebay link where I bought mine.

 

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=150372773892

 

And I'm not sure how savy you are but here are Youtube instructions on installation/

 

roninx
roninx
Posted
  • Author
Posted
Hi RoninX,

 

I used your Drivers for my NC10 to get my Snowleo running, but the azalia audio driver doesn't work for me.

 

Any idea what I can try?

 

All the best - Tastenmeister

 

P.S.: I didn't use the VoodooPS2Controller, because I had in earlier times a KP, but Keyboard and Trackpad workgs fine.

 

i have yet to find a driver that doesn't just output from speakers. my headphone jacks aren't functional. this collection was the best i could do, and my efforts were on getting video working, which is far more important than sound. Update: AppleHDA.kext in my newly attached 10.6.2 file works for me (whether it needs the DSDT file included in the package is beyond me.) i won't be around for a while. i'm trying not to fail school with 19 credits. --godspeed.

  • 2 weeks later...
Portos61
Portos61
Posted
Posted

I have a strange problem with the GMA950 27AE and SL, the first absolute boot all work ok, after, only with -x flag the video is OK, the resolution is 1024x600 and QE/CI active, without -x flag the video is gray.

Someone has the solution?

Thank

Bye

NSCXP2005
NSCXP2005
Posted
Posted

Hi roninx,

 

I'm having problems booting up the SL Installer using a Boot132 and SL DVD combined on a USB Stick.

I keep getting a kernel panic on loading the SATA drivers.

 

it seems to happen on the kext IOATAFamily.kext.

 

Do you know how I can get past this problem and get to the installer?

 

Thank you for your time

 

All the best

 

NSCXP2005

NSCXP2005
NSCXP2005
Posted
Posted

Hi to roninx,

 

You have a complete set of kext that I can use to install SL using a Boot132 and SL DVD on a USB stick?

 

I used this guide to make a USB combo stick. Here

 

I hope you can help me. I am having so many problems and do not want to use NetbookInstaller to install SL.

 

I want to install a EFI Vanilla SL.

 

Everythime I try it does not load the kexts I add.

 

I hope you can help me.

 

All the best

 

NSCXP2005

roninx
roninx
Posted
  • Author
Posted

i don't have a record of the link where i got the boot CD that i use.

 

but i used this boot CD to swap for the retail version to install OS X

 

this boot CD i had to boot in Enhanced/AHCI mode to work with the least amount of problems.

 

when the installation was finished it would revert back to Compatible.

 

I used the BootCD to boot the main hard drive, (it lets you choose your hard drive as a boot option)

 

and from that point i installed the necessary drivers with a spare usb keyboard/mouse set

 

the best option is to upgrade first then install the 10.6.1 drivers.

roninx
roninx
Posted
  • Author
Posted
I have the same GMA but in my eeebox, and i can't get it working.

I've tried many things, but STUCKED!

Do you have an EFI String?

Cheers

 

EFI strings never worked for me.

you need customized-from-stock graphics drivers (AppleIntelGMA950... etc. IntelFrameBuffer.. etc)

the plist file within that as well as the physical driver in "MacOS" must be modified using HexEdit by replacing stock bitswitched IDs with your own bitswitched hardware IDs

that is how i get fully functioning drivers every time.

roninx
roninx
Posted
  • Author
Posted
Hi roninx,

 

I'm having problems booting up the SL Installer using a Boot132 and SL DVD combined on a USB Stick.

I keep getting a kernel panic on loading the SATA drivers.

 

it seems to happen on the kext IOATAFamily.kext.

 

Do you know how I can get past this problem and get to the installer?

 

Thank you for your time

 

All the best

 

NSCXP2005

 

Boot with a bootcd into the install DVD terminal application

there you must type a cp command to copy a certain IOATAFamily.kext (you have to use a different one from the stock.)

IOATAFamily.kext.zip

12gauge
12gauge
Posted
Posted
When I update my NC10 from 10.6 to 10.6.2 , I can't boot into SL , it auto restart......

Can someone tell me how to update 10.6.2 from 10.6 ?

 

10.6.2 Killed support for ATOM processors, you need to acquire the hacked 10.2.0 atom kernel. See:

 

 

http://www.insanelymac.com/forum/index.php?showtopic=197020

 

and also replace your old sleepenabler.kext with netkas' new one see:

 

http://www.insanelymac.com/forum/index.php?showtopic=196466

p0k
p0k
Posted
Posted
I have a strange problem with the GMA950 27AE and SL, the first absolute boot all work ok, after, only with -x flag the video is OK, the resolution is 1024x600 and QE/CI active, without -x flag the video is gray.

Someone has the solution?

Thank

Bye

 

Did you find a way to solve it?

I have exactly the same issue.

  • 1 year later...
 Share
Go to topic listing
×
×
  • Create New...