cybersyx Posted September 28, 2009 Share Posted September 28, 2009 Hi, anyone know how to enable Speedstep on Snow Leopard 64Bit? I've patched my DSDT with this: Scope (_PR) { Processor (CPU0, 0x01, 0x00000810, 0x06) { Name (_PPC, Zero) Name (_PCT, Package (0x02) { ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000199, // Address ,) }, ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000198, // Address ,) } }) Name (_PSS, Package (0x03) { Package (0x06) { 0x0C20, 0x000124F8, 0x0A, 0x0A, 0x0820, 0x0820 }, Package (0x06) { 0x0A9C, 0xFDE8, 0x0A, 0x0A, 0x071C, 0x071C }, Package (0x06) { 0x0918, 0xEA60, 0x0A, 0x0A, 0x061A, 0x061A } }) } Processor (CPU1, 0x02, 0x00000000, 0x00) { Name (_PPC, Zero) Name (_PCT, Package (0x02) { ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000199, // Address ,) }, ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000198, // Address ,) } }) Name (_PSS, Package (0x03) { Package (0x06) { 0x0C20, 0x000124F8, 0x0A, 0x0A, 0x0820, 0x0820 }, Package (0x06) { 0x0A9C, 0xFDE8, 0x0A, 0x0A, 0x071C, 0x071C }, Package (0x06) { 0x0918, 0xEA60, 0x0A, 0x0A, 0x061A, 0x061A } }) } Processor (CPU2, 0x03, 0x00000000, 0x00) { Name (_PPC, Zero) Name (_PCT, Package (0x02) { ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000199, // Address ,) }, ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000198, // Address ,) } }) Name (_PSS, Package (0x03) { Package (0x06) { 0x0C20, 0x000124F8, 0x0A, 0x0A, 0x0820, 0x0820 }, Package (0x06) { 0x0A9C, 0xFDE8, 0x0A, 0x0A, 0x071C, 0x071C }, Package (0x06) { 0x0918, 0xEA60, 0x0A, 0x0A, 0x061A, 0x061A } }) } Processor (CPU3, 0x04, 0x00000000, 0x00) { Name (_PPC, Zero) Name (_PCT, Package (0x02) { ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000199, // Address ,) }, ResourceTemplate () { Register (FFixedHW, 0x10, // Bit Width 0x00, // Bit Offset 0x0000000000000198, // Address ,) } }) Name (_PSS, Package (0x03) { Package (0x06) { 0x0C20, 0x000124F8, 0x0A, 0x0A, 0x0820, 0x0820 }, Package (0x06) { 0x0A9C, 0xFDE8, 0x0A, 0x0A, 0x071C, 0x071C }, Package (0x06) { 0x0918, 0xEA60, 0x0A, 0x0A, 0x061A, 0x061A } }) } } then i put smbios.plist in /Extra with modelname: <key>SMproductname</key> <string>MacPro5,1</string> then i put Legacy_ACPI_SMC_PlatformPlugin.kext in /Extra/Extensions but speedstep not want to work. Any idea? Thanks a lot to all. Link to comment https://www.insanelymac.com/forum/topic/189420-speedstep-snow-leopard-64bit-vanilla/ Share on other sites More sharing options...
mitch_de Posted October 30, 2009 Share Posted October 30, 2009 Are your sure your CPU / mainboard has hex 810 Adress for the configuration ? Some has hex410 (8xxx > 4xxx). Also never use an dsdt patch without knowing that the dsdt its for same cpu / mainboard !!! Problematic : - config adresses (above) : you can look after them in your ssdt (you can use Everest (win) to ACPI extract that tables) - multipliers : must really fit to your cpu ,means FSB * multiplier not much to high 0x0820 = multiplier 8 * FSB = xyz MHZ Also VID , 0x0820 VID=20hex must fit , not much to low , not much to high To use P-States you must enable EIST (Enh. Speedstep in BIOS) and use voodoopower or AppleIntelCPU.kext /AppleLPC. With AppleIntelCPU also ApplePLC must be loaded (kextstat to check). voodoopower is much easier to config / getting to run than AppleIntelCPU + Apple LPC. And i cant see any benefit using AppleIntelCPU against voodoopower. Link to comment https://www.insanelymac.com/forum/topic/189420-speedstep-snow-leopard-64bit-vanilla/#findComment-1314789 Share on other sites More sharing options...
Smith@@™ Posted October 30, 2009 Share Posted October 30, 2009 Voodoopower for 64 bit there isn't now, there is only voodoopstate.kext, that working great, ihmo.. Ciao Link to comment https://www.insanelymac.com/forum/topic/189420-speedstep-snow-leopard-64bit-vanilla/#findComment-1315121 Share on other sites More sharing options...
Recommended Posts