5ft heroes Posted September 14, 2009 Share Posted September 14, 2009 im trying to install mac osx with the ipc disc and i also have kalway. Im stuck with what to pick in the customize section. Dont have a clue. I have tried to install already but i have got it to work. Can someone please tell me what bits i ned to install thanks, my spec is below 10/100 LAN SKU Gigabit LAN SKU Boxed Product BOXD915GUXL BOXD915GUXLK Codes 10-Pack Product Codes BLKD91GUXL BLKD91GUXLK KD915GUXLPAK10 KD915GUXLKPAK10 BIOS ID String EV91510A.86A AA # (Altered Assembly) C63987-xyz C63985-xyz Form Factor and Size MicroATX 9.6 x 9.6 inches Processor Support Intel® Pentium® 4 processors in the LGA775 package. Note: It is important to verify supported processors before using this Intel® Desktop Board. Processor Front Side Bus 800 and 533 MHz Power Supply ATX12V 2.0 or SFX12V 3.0 compliant with 2x2 power connector Chipset Intel® 915G chipset Memory Type DDR2 - 533 and 400 MHz; dual channel support Note: Be sure to review the Tested Memory list before using this Intel® Desktop Board. Max Memory Up to 4 GB Integrated Graphics Intel® Graphics Media Accelerator 900 Integrated Audio Intel® High Definition Audio Integrated LAN Intel® Pro 10/100 Gigabit LAN Expansion Slots Two PCI One PCI Express* x1 One PCI Express* x16 USB Ports Four ports on back panel Four ports to front panel via onboard header Peripheral Interfaces One diskette drive interface; One parallel port; One serial port; PS/2 keyboard and mouse ports HDD Four Serial ATA; One IDE (ATA 100/66/33) Other Features Heceta 6e Intel® Precision Cooling Technology Trusted Platform Module (TPM) on Gigabit LAN SKU only Warranty 3-year limited warranty Link to comment https://www.insanelymac.com/forum/topic/186504-a-beginner-whos-needs-help-please/ Share on other sites More sharing options...
razy60 Posted September 14, 2009 Share Posted September 14, 2009 hi, first check the OSx wiki to see if your hard ware is compatible. Then read as many guides as you can. here's a couple. http://blogulate.com/content/make-mac-os-x...n-on-an-x86-pc/ http://www.taranfx.com/blog/?p=1204. After that if you need any more help post back. Raz Link to comment https://www.insanelymac.com/forum/topic/186504-a-beginner-whos-needs-help-please/#findComment-1265896 Share on other sites More sharing options...
Recommended Posts