Kinjid Posted September 13, 2009 Share Posted September 13, 2009 Okay, I have tried booting into -legacy, -f, -x, -c, cpus=1, busratio=20 Booting with my HD as IDE, SATA, AHCI, Linux ACHI As almost every guide I have read to fix the problem suggests to do(That's about 20 guides) and no matter what they tell me, or what I have tried that wasn't said in guides *Edit 1* It just popped into my head, that could it have anything to do with the distro(iPC Universal Final Release)? System Specs Hard-Drive 500gb Sata HD (Brand Unknown) Master CD Drive IDE DVD-RW ( Brand Unknown) Slave APICs Processor 0 Core 0 Thread 0 0 Core 1 Thread 0 1 Processors Information Processor 1 ID = 0 Number of cores 2 (max 2) Number of threads 2 (max 2) Name Intel Core 2 Duo E7300 Codename Wolfdale Specification Intel® Core�„�2 Duo CPU E7300 @ 2.66GHz Package (platform ID) Socket 775 LGA (0x0) CPUID 6.7.6 Extended CPUID 6.17 Core Stepping M0 Technology 45 nm Core Speed 1600.0 MHz Multiplier x FSB 6.0 x 266.7 MHz Rated Bus speed 1066.7 MHz Stock frequency 2666 MHz Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size L2 cache 3072 KBytes, 12-way set associative, 64-byte line size FID/VID Control yes FID range 6.0x - 10.0x Max VID 1.175 V Chipset Northbridge NVIDIA GeForce 7050 rev. A2 Southbridge NVIDIA nForce 610i rev. A2 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR2 Memory Size 4096 MBytes Channels Single Memory Frequency 333.3 MHz (4:5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 4 RAS# Precharge (tRP) 4 Cycle Time (tRAS) 14 Bank Cycle Time (tRC) 19 Command Rate (CR) 2T Link to comment https://www.insanelymac.com/forum/topic/186323-installation-problem/ Share on other sites More sharing options...
Kinjid Posted September 13, 2009 Author Share Posted September 13, 2009 **Bump/Update** I have tried starting with all USB(Except Keyboard and Mouse) unplugged, as well as the ethernet, no succsess... Anyone have any ideas? Link to comment https://www.insanelymac.com/forum/topic/186323-installation-problem/#findComment-1264923 Share on other sites More sharing options...
sndwav Posted September 14, 2009 Share Posted September 14, 2009 I don't have a lot of hackintosh experience, but I've read that there is a problem that ignores the drive even in ACHI mode. Trying a different distro (iDeneb or iATKOS) can't hurt. Link to comment https://www.insanelymac.com/forum/topic/186323-installation-problem/#findComment-1265001 Share on other sites More sharing options...
Kinjid Posted September 14, 2009 Author Share Posted September 14, 2009 Can anyone confirm this before I use another cd and another 3 days of downloading another distro? Link to comment https://www.insanelymac.com/forum/topic/186323-installation-problem/#findComment-1265108 Share on other sites More sharing options...
Recommended Posts