jeps Posted August 22, 2009 Share Posted August 22, 2009 Hi, First this is my system spec - Processor: Intel® Pentium D, Pentium® 4, Celeron D processors, Socket T (LGA775 Chipset: VIA P4M800 Pro + 8237R Plus Front Side Bus: 533/800MHz front side bus (FSB) Memory: Single channel DDRII 533 / 400 x2 DIMMs VGA on Die: Integrated Expansion Slots: 1 x AGP 8x, 3 x PCI IDE: ATA133 x 2 Serial ATA(SATA)/RAID: Serial ATA x 2 with RAID 0, 1, JBOD Audio: 5.1 channel, AC’97 interface, Realtek ALC653 LAN: 10/100M, Realtek RTL8100C IEEE1394: N/A Ok. I have just finished installing JaS Leopard 10.5.4, Basically after install the system now hangs on the apple screen if the usb mouse is plugged in, I can boot without it an plug it in after an it works fine but during boot it will crash. I also attempted to see if my ethernet had installed "out the box" so to speak, only to find that when i plug the ethernet cable in the whole system just freezes and again if i restart wont boot up with the cable plugged in.. Can anyone help? Link to comment https://www.insanelymac.com/forum/topic/181021-help-strange-system-crashes/ Share on other sites More sharing options...
jeps Posted August 22, 2009 Author Share Posted August 22, 2009 ok, strange, I did a re install and it all works perfect! Link to comment https://www.insanelymac.com/forum/topic/181021-help-strange-system-crashes/#findComment-1231913 Share on other sites More sharing options...
Recommended Posts