letni1 Posted August 21, 2009 Share Posted August 21, 2009 Un saluto a tutti voi del forum: siete veramente GRANDI ! Dalla fine del 2007 ho fatto gia' (con successo grazie a voi) qualche macchinina hack, se qualcuno avesse voglia di controllare il mio hardware in firma e darmi l'ok sulla compatibilita' dei componenti per l'installazione di iDeneb 10.5.6 gliene sarei grato. Ciao Ragazzi Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/ Share on other sites More sharing options...
Hugo_bee Posted August 21, 2009 Share Posted August 21, 2009 credo di si.. ma manca un dettaglio che io non so.. la motherboard che controller ATA/SATA ha? tutto il resto è abbastanza ok.. ma questo dettaglio è essenziale non credi?? ciao ne? Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1231515 Share on other sites More sharing options...
letni1 Posted August 21, 2009 Author Share Posted August 21, 2009 credo di si.. ma manca un dettaglio che io non so.. la motherboard che controller ATA/SATA ha? tutto il resto è abbastanza ok.. ma questo dettaglio è essenziale non credi?? ciao ne? @ugokind: ho editato; puo' andare bomber? Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1231548 Share on other sites More sharing options...
walterino Posted August 21, 2009 Share Posted August 21, 2009 scrivi su google p5q leopard trovi di tutto e di + ciao Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1231551 Share on other sites More sharing options...
Hugo_bee Posted August 21, 2009 Share Posted August 21, 2009 scrivi su google p5q leopard trovi di tutto e di + ciao direi di si unico punto interrogativo è la rete. se hai una penna usb come me da 8 giga con un setup retail 10.5.6 sul quale fare esperimenti.. sei a posto walterino ti rispondo qui: io me la cavicchio col dsdt ma non so modificare un bios.. però ci sono i 3 siti canonici dove trovare già molte cose tra cui anche bios moddati.. il sito dei bios mod è quello osx86.es.. mentre l'altro è il sito linux dei dsdt patchati ora cerco e ti dico ps.. la tua asus f5gl non c'è qui http://acpi.sourceforge.net/dsdt/view.php?manufacturer=ASUS ps.. che tipo di bios usa (phoenix, ami, award)? Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1231567 Share on other sites More sharing options...
walterino Posted August 21, 2009 Share Posted August 21, 2009 il tipo di bios è ami la mainboard ha la stessa sigla del note f5gl e quasi un mese che cerco non sono riuscito a trovare nulla ho scritto il post a kabil nessuna risposta originalmacnut non sta partecipando al progetto causa divorzio con la moglie .......bo se dovessi trovare qualcosa o se volessi fare delle prove tanto il note è in garanzia se si frigge ..... chissene io ho trovato questo ma non sono in grado Here is a guide for modifying DSDT for AMI bios. I gathered most information from Kabyl. The orginal plan was to create a nice pdf but I am unable to gather enough time to sit down and create one. So hopefully, this guide will do for now. Feel free to add other bios moding guide here. WARNING!!! BAD MODIFICATION OF THE ROM FILE AND FLASHING BACK INTO YOUR BIOS CAN KILL YOUR MOTHERBOARD! TRY THIS AT YOUR OWN RISK! I AM NOT RESPOSIBLE FOR ANY DAMAGE!!!!!! IF YOU ARE UNSURE OF WHAT YOU ARE DOING, DO NOT TRY THIS!! 1. Download the AMI bios you wish to modify. It should have the .ROM extension. 2. Run the MMTOOL.EXE from the AMI_DSDT_TOOLS.zip 3. Click "Load ROM" and choose your bios file. 4. We are now going to extract the DSDT from the ROM. Click on "Extract" tab. Then on the list box on the bottom half of the MMTOOL, select "1B" named "Single Link Arch BIOS". 5. Make sure "In uncompressed form" is selected. Enter a filename in the "Module File" textbox and then click on the "Extract" button (For example "SingleLink.dat") 6. Using WinHex and open up the file you extract ("SingleLink.dat"). We are going to look for the case sensitive string "DSDT". There should be two instance of this in the file. We are only interested in the second instance. So search for "DSDT" twice. 7. Right click on "D" of the "DSDT" and choose "Beginning of block". 8. From this position, search for the hex string 57 41 4B 68 2E (WAKh.) 9. Right click "h" of the "WAKh" and choose "End of block". 10. In the WinHex Menu, select the "Edit" drop down and move down to "Copy Block" then "Into New File" in the new choices. Enter a file name with the .aml extension (ex: mydsdt.aml). 11. Extract iasl.exe from AMI_DSDT_TOOLS.zip into the directory where you saved the .aml file. Open a command prompt and change to the directory where you saved the .aml file. use this command line to decompile the .aml file: "iasl.exe -d mydsdt.aml". "mydsdt.aml" is the .aml you saved earlier. 12. After running "iasl.exe -d mydsdt.aml", it should generate a file name "mydsdt.dsl". 13. Now here is where we start to remove the "Alias" in the dsdt. Use notepad and open the "mydsdt.dsl" you should see lines like: CODE Processor (P001, 0x01, 0x00000810, 0x06) {} Alias (P001, CPU1) Processor (P002, 0x02, 0x00000000, 0x00) {} Alias (P002, CPU2) Processor (P003, 0x03, 0x00000000, 0x00) {} Alias (P003, CPU3) Processor (P004, 0x04, 0x00000000, 0x00) {} Alias (P004, CPU4) We are going to remove any line that starts with "Alias". After it is removed, save the file. 14. Here is the part where if you have problems with your DSDT, you are going to have problems. There are number of resource on google that can help you debug the issue you will be having. Hopefully, you can don't have any issues. What I would usually do is google "dsdt" and the error message that iasl throws out. Kabyl might have hint on how to recompile the DSDT while ignoring the warnings and errors. To compile your new mydsdt.dsl use the command line "iasl.exe mydsdt.dsl". 15. After running "iasl.exe mydsdt.dsl" it should produce a file named "DSDT.aml". We are now going to inject this file back into the .dat file we saved earlier ("SingleLink.dat"). In WinHex, open the "DSDT.aml" you compiled. Press "Control A" (Select all). On the lower right hand side of WinHex you should notice a hex representation of the size of the block you have selected (For example "Size: 5AC4"). Make note of this hex size. 16. What we are trying to do here is to insert the DSDT.aml into "SingleLink.dat" without changing the file size of "SingleLink.dat". Since the new DSDT (DSDT.aml) is smaller, we can just replace the DSDT and then pad the rest of the sectors with 00. 17. Go back to the "SingleLink.dat" and hopefully the DSDT block we copied into a new file is still there. If not, then repeat steps 7,8,9 again. 18. Left click on the "D" of the DSDT in the beginning of the block in "SingleLink.dat". In the WinHex "Edit" drop down on top, then select "Fill Block". We are going to "Fill with hex values" of "00". 19. You will see "00" filled block. Your current cursor position should still be where "D" was. Now on top of the WinHex windows, click on "Position" then choose "Goto offset". Select "current position" and put the hex size that you have made a note of in step 15 in "New position" text box. Click okay, and it will take you to the new offset position. Right click on the new position (blinking cursor) and select "End of block". 20. Go back to the beginning of the block where the "D" was before you filled it with 00 and left click on that position. In the WinHex menu on top click on "Edit" and select choose "Remove". You will get a popup box saying removing the current block will decrease the file. Click "yes" to continue 21. Now, goto your DSDT.aml file, select everything in this file by pressing "Control A". Then in the "Edit" menu in WinHex, choose "Copy Block" then click "Normally". 22. Go back to the "SingleLink.dat" file, your cursor should still be where the "D" was. In the WinHex menu on top, choose "Edit", then "Clipboard Data" then "Paste". A popup window will inform you that the data about to be pasted will increase the file size. Click Ok. 23. Goto the end of the block (should end with "WAKh") and make sure there is a hex character of 2E right after "WAKh". If there no 2E, then just modify the character right after "WAKh" to hex 2E. 24. Save the file and now we are ready to insert the file back into the .ROM 25. Go back into the MMTools and choose "Replace" tab. On the list box, chick on "1B | Single Link Arch BIOS". Next to the "Module file:" textbox, there should be a "Browse" button, find the modified "SingleLink.dat". Click on "Replace" button and you should be done. 26. Click on "Save ROM" button and save to a new ROM file. Flash this ROM into your BIOS. Link to WinHex I found on Google: WinHex grazie ciao F5GL214AS.zip Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1231655 Share on other sites More sharing options...
Hugo_bee Posted August 22, 2009 Share Posted August 22, 2009 ciao ci sto provando da un pò ma mi da errore mentre tento di decompilare il copia incolla del blocco tbutils-0257: *** Warning: Invalid table signature found: [ÉDSD] Table header is invalid! Could not get table from the file cioè con winhex ho -credo- trovato inizio e fine ma forse non va bene! scusa.. tu non puoi darmi un dsdt senza passare da questa procedura? Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232253 Share on other sites More sharing options...
walterino Posted August 22, 2009 Share Posted August 22, 2009 il problema è che riesco solamente ad installare idened 10.5.6 che è l'unica che vede l'hd ma poi comunque non riesco ad avviarlo provato anche ad installare su fisso e provare a farlo ripartire su note sempre lo stramaledetto solito errore Mac Framework successfully initialized using 15728 buffer headers and 4096 cluster IO buffer headers grazie ancora ciao Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232444 Share on other sites More sharing options...
Hugo_bee Posted August 23, 2009 Share Posted August 23, 2009 non hai un ubuntu live per darmi il dsdt da li? perchè non riesco.. la guida dice delle cose che io non vedo nel tuo bios Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232611 Share on other sites More sharing options...
walterino Posted August 23, 2009 Share Posted August 23, 2009 copiato con slax con ubuntu mi da errore sia con l'ultima versione la 9.04 che la vecchia 8.04 sono un nubbione ....ho un bios che fa pietà non esiste ne ahci ne acpi bo...grazie x il tempo che mi stai dedicando ciao dsdt.zip Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232672 Share on other sites More sharing options...
Hugo_bee Posted August 23, 2009 Share Posted August 23, 2009 copiato con slax con ubuntu mi da errore sia con l'ultima versione la 9.04 che la vecchia 8.04 sono un nubbione ....ho un bios che fa pietà non esiste ne ahci ne acpi bo...grazie x il tempo che mi stai dedicando ciao ok dopo prnzo lo guardo ma come errore.. copiare e basta.. che errore é? a dopo Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232731 Share on other sites More sharing options...
walterino Posted August 23, 2009 Share Posted August 23, 2009 error while copying "dsdt". there was an error copying the file into/media/dream (il nome della mia penna usb) Error opening file: Permission denied in pratica non sono amministratore di sistema e non ho il permesso di copiare .....bo Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232738 Share on other sites More sharing options...
Hugo_bee Posted August 23, 2009 Share Posted August 23, 2009 non è quello il punto non puoi LEGGERE.. l'errore è di lettura poichè sei in proc.. se non sei loggato come root non leggi nulla devi prima fare sudo passwd root e impostare la pww poi entri come root con su - ora vai in proc e copi ma se il file è quello.. ci ho lavorato un pò ecco qualcosa Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232815 Share on other sites More sharing options...
walterino Posted August 23, 2009 Share Posted August 23, 2009 ho impostato la password ma non riesco a loggarmi installato ubuntu non riesco a copiare sto file sempre lo stesso errore so proprio gnorante..... facciamo conto che quel file che mi hai allegato è buono come glielo invio nel bios ? Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1232828 Share on other sites More sharing options...
robyrocker89 Posted August 23, 2009 Share Posted August 23, 2009 ho impostato la password ma non riesco a loggarmi installato ubuntu non riesco a copiare sto file sempre lo stesso errore so proprio gnorante..... facciamo conto che quel file che mi hai allegato è buono come glielo invio nel bios ? per loggarti come root da terminale digiti 'su' (senza apici) e poi digiti la password...occhio che quando digiti non vedi i caratteri sul terminale quindi premi lo stesso invio dopo averla digitata...dopo ti apparirà il simbolo # e vuol dire che ora sei utente root... oppure disconnetti la sessione di ubuntu e al posto del tuo nome utente digiti 'root' (senza apici) e poi digiti la password allo step successivo!! Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1233039 Share on other sites More sharing options...
Hugo_bee Posted August 23, 2009 Share Posted August 23, 2009 ho impostato la password ma non riesco a loggarmi installato ubuntu non riesco a copiare sto file sempre lo stesso errore so proprio gnorante..... facciamo conto che quel file che mi hai allegato è buono come glielo invio nel bios ? no aspetta.. quel file è il dsdt che mac carica al boot quel file non ha nulla a che vedere con la modifica del bios.. il tuo pc come tutti rimane intonso.. quel file va nella partizione di avvio del mac nella / o nella cartella Extra.. Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1233051 Share on other sites More sharing options...
Daveta Posted August 23, 2009 Share Posted August 23, 2009 se il topic non è solo di ringraziamento, diamo un titolo decente per cortesia Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1233064 Share on other sites More sharing options...
Hugo_bee Posted August 23, 2009 Share Posted August 23, 2009 walterino facciamo così testa il dsdt.. ed andiamo avanti così, in fondo un dsdt ce l'abbiamo poi.. continuiamo con un topic.. aprilo tu, intitolato con il tuo modello di hw e sviluppiamo Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1233177 Share on other sites More sharing options...
walterino Posted August 23, 2009 Share Posted August 23, 2009 mi converra aprire direttamente un'altro post se non si riesce a sistemare il bios è praticamente impossibile avviare l'installazione e testare il dsdt.... grazie comunque ciao Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1233340 Share on other sites More sharing options...
begontxu Posted October 5, 2009 Share Posted October 5, 2009 mi converra aprire direttamente un'altro post se non si riesce a sistemare il bios è praticamente impossibile avviare l'installazione e testare il dsdt.... grazie comunque ciao Quali passi devo seguire per installare un F5GL?. Mi perdo in essa dal DST. L'avete fatto l'installazione? ciao Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1290241 Share on other sites More sharing options...
walterino Posted October 27, 2009 Share Posted October 27, 2009 no impossibile metti hardware in firma Link to comment https://www.insanelymac.com/forum/topic/180953-se-qualcuno-avesse-voglia-intanto-io/#findComment-1311666 Share on other sites More sharing options...
Recommended Posts