Fadiddy Posted August 17, 2009 Share Posted August 17, 2009 I can install the OS successfully, yet after the initial reboot, it keep rebooting on its own during the boot up. It says "Darwin..." and keeps rebooting. Can someone please help in this install? I would greatly appreciate it. Here are my current system specs: Specifications General Computer Type: Desktop Type of Use: Tower Processor Type: Intel® Pentium® D Processor 940 Speed: 3.20GHz Front Side Bus Speed: 800MHz L2 Cache: 4MB (2MBx2) Technology: Intel® Dual Core Memory Type: DDR2 Installed: 2GB (PC2-4200) Maximum: 2GB Speed: 533MHz Hard Drive Capacity: 300GB Speed: 7200rpm Interface: SATA (RAID Ready) Optical Drive #1 DVD+R DL Write: 8x max. DVD+R Write: 8x max. DVD+RW Write: 8x max. DVD-R Write: 8x max. DVD-RW Write: 8x max. CD-R Write: 24x max. CD-RW Write: 16x max. DVD±RW: Yes CD Read: 32x max. DVD Read: 8x max. DVD-RAM Write: 5x max. (4.7GB) DVD-R DL Write: 4x max. BD-R Write: 2x max. BD-RE Write: 2x max. BD-ROM Read: 2x max. BD-RE Read: 2x max. BD-R DL Read: 2x max. BD-R DL Write: 2x max. DVD-RAM Read: 5x max. (4.7GB) BD-ROM DL Read: 2x max. Optical Drive #2 DVD Read: Yes Expansion Bays 5.25" Half-Height: 2 (occupied) 3.5" (External): 1 (occupied) 3.5" (Internal): 4 (1 occupied) Expansion Slots Multimedia Card Reader: Memory Stick®, Memory Stick PRO™ , Memory Stick Duo™ , Compact Flash® Type I and Type II, Smart Media, SD/ MultiMediaCard™ , xD Picture Card® PCI Slot: 2 (1 available) x16 PCI Express: One x16 PCI Express (occupied by Graphics Card), One PCI Express x1 (available) Audio Sound System: Sony® Sound Reality™ - Audio Enhancer Graphics Processor: NVIDIA® GeForce™ 7600GT Graphics Video RAM: 256MB GDDR3 SDRAM (dynamically allocated shared RAM/video memory) Chipset: Intel® 945P Interface: TV-Out, DVI-I Out, DVI-D Out, x16 PCI Express Format(s) Supported: Giga Pocket® MPEG2 Realtime Encoder board with TV Tuner Inputs and Outputs Audio In: 1 (Line In) Composite Audio/Video Input(s): 2 (1 Front, 1 Rear) Headphone Jack: 1 i.LINK® Interface: 2 (6-pin Rear/4-pin Front) interface Microphone Input: 1 Parallel Port(s): 1 PS/2® Port: 2 (Mouse/Keyboard) S-Video Input(s): 2 (1 Front, 1 Rear) DVI Output(s): 2 (1 with HDCP) USB Port(s): 7 (3 Front, 4 Rear) (2.0 compliant) VGA Output(s): 1 With DVI to VGA converter (not included) VHF/UHF Input(s): 1 S/PDIF Output(s): 1 Subwoofer/Center Audio Output(s): 1 Analog Audio Output(s): 1 (Front) Networking/Modem Ethernet Protocol: 10Base-T/100Base- TX/1000Base-T Ethernet Speed: Gigabit Ethernet (RJ-45) Modem Type: V.90 compatible data/fax modem (RJ- 11) Power Power Management: ACPI 1.0 Compliant Power Requirements: 100-240V Power Consumption: 400W (max.) Link to comment https://www.insanelymac.com/forum/topic/180248-trying-to-install-ideneb-1055-on-sony-vaio-vgc-rc310g/ Share on other sites More sharing options...
Recommended Posts