altrodestino Posted August 15, 2009 Share Posted August 15, 2009 Hi guys, this is my hardware list obtained with lspci under linux. Does anyone knows if I'll be able to run latests version of iDeneb? Mainboard is an asus P5B (normal edition - no deluxe) Is it possible to install it in a partition of a secondary drive? Thanks. fabio@alpha:~$ lspci 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1) 02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:02.0 PCI bridge: Intel Corporation 21152 PCI-to-PCI Bridge 06:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 06:08.0 Multimedia controller: C-Cube Microsystems E4? (rev b1) 06:0c.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) Link to comment https://www.insanelymac.com/forum/topic/179994-will-ideneb-work-on-my-hardware/ Share on other sites More sharing options...
altrodestino Posted August 16, 2009 Author Share Posted August 16, 2009 Well.. I'll reply by myself.. ideneb 1.5 works great on my system! The components you see above are from an Intel P5B motherboard and a Nvidia GeForce 7600 GS. I've been successfull installing ideneb following the notes for the P5B Motherboard and the Nvidia GeForce 7600 GS. I'm now able to use DVI output monitor at full resolution, audio output (no input), ethernet .. everything works just fine.. Link to comment https://www.insanelymac.com/forum/topic/179994-will-ideneb-work-on-my-hardware/#findComment-1227651 Share on other sites More sharing options...
Recommended Posts