Chad l Posted July 24, 2009 Share Posted July 24, 2009 Hi Im looking for some help with resizing my osx86 partition, im dual-booting with vista sp2 and osx86 10.5.7 on a lenovo 300 n200 Laptop. I have a 80gb HD with 2 partitions, my os partition is 15.04 GB and my vista partition is 59.48 GB, I dont want to remove vista just resize to make my osx drive bigger. If someone could direct me to a tutorial or explain how this could be done it would be much appreciated, im sorry if there is already a thread on this, i couldn't find it. Ive considered reinstalling osx but then im stuck updating from xx.x.2 to xx.x.7 again, Im willing to purchase software to do this so any advice will be taken. Here's my stats Model Name: Mac Model Identifier: MacBookPro5,1 Processor Name: Intel® Core2 Duo CPU T7100 @ Processor Speed: 1.8 GHz Total Number Of Cores: 2 L2 Cache (per processor): 2 MB CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM Memory: 2.5 GB Bus Speed: 100 MHz Boot ROM Version: ************ (LENOVO) Network: IPv4: Type: 6to4 BSD Device Name: stf0 Has IP Assigned: No ipv6_address: ******************** USB Ethernet (en2): Type: Ethernet Hardware: Ethernet BSD Device Name: en2 Has IP Assigned: Yes Software: System Software Overview: System Version: Mac OS X 10.5.7 (9J61) Kernel Version: Darwin 9.6.0 Time since boot: 48 minutes Audio (Built In): Intel High Definition Audio: Device ID: 0x17AA384E Audio ID: 12 Available Devices: Speaker: Connection: Internal Line Out: Connection: 1/8 inch Jack Microphone: Connection: 1/8 inch Jack Diagnostics: Power On Self-Test: Last Run: 24/07/09 1:55 PM Result: Passed Disc Burning: HL-DT-ST DVDRAM GMA-4082N: Firmware Revision: ED01 Interconnect: ATAPI Burn Support: Yes (Generic Drive Support) Profile Path: None Cache: 2048 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: -R, -R DL, -RAM, -RW, +R, +R DL, +RW Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO Media: Insert media and refresh to show available burn speeds FireWire: FireWire Bus: Maximum Speed: Up to 400 Mb/sec Graphics/Displays: Intel GMA X3100: Chipset Model: GMA X3100 Type: Display Bus: Built-In VRAM (Total): 144 MB Vendor: Intel (0x8086) Device ID: 0x2a02 Revision ID: 0x000c Displays: Display: Resolution: 1280 x 800 Depth: 32-Bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Built-In: Yes Display Connector: Status: No Display Connected Memory: Bank 0/M1: Size: 2 GB Type: DDR2 SDRAM Speed: 533 MHz Status: OK Bank 1/M2: Size: 512 MB Type: DDR2 SDRAM Speed: 533 MHz Status: OK Serial-ATA: Intel ICH8-M AHCI: Vendor: Intel Product: ICH8-M AHCI Speed: 3.0 Gigabit Description: AHCI Version 1.10 Supported FUJITSU MHW2080BH PL: Capacity: 74.53 GB Model: FUJITSU MHW2080BH PL Revision: 0084001E Native Command Queuing: Yes Queue Depth: 32 Removable Media: No Detachable Drive: No BSD Name: disk0 Mac OS 9 Drivers: No Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Verified Volumes: disk0s1: Capacity: 59.48 GB Available: 29.48 GB Writable: Yes File System: UFSD disk0s5: Capacity: 15.04 GB Available: 4.48 GB Writable: Yes File System: Journaled HFS+ Intel ICH8-M AHCI: Vendor: Intel Product: ICH8-M AHCI Speed: 3.0 Gigabit Description: AHCI Version 1.10 Supported USB: USB High-Speed Bus: Host Controller Location: Built In USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x2836 PCI Revision ID: 0x0003 PCI Vendor ID: 0x8086 Bus Number: 0xfd Belkin 54g USB Network Adapter: Product ID: 0x705a Vendor ID: 0x050d (Belkin Corporation) Version: 0.01 Speed: Up to 480 Mb/sec Manufacturer: Belkin Location ID: 0xfd100000 Current Available (mA): 500 Current Required (mA): 300 Link to comment https://www.insanelymac.com/forum/topic/176418-help-resizing-hd-vistaosx/ Share on other sites More sharing options...
Recommended Posts