tspilker Posted July 22, 2009 Share Posted July 22, 2009 There are a number of obstacles I have encountered trying to get this installation running. Firstly, the disc would not boot on the internal DVD drive, I used an external USB one. Next, the keyboard and trackpad are not recognized in the installation. I remedied this by plugging in a USB mouse and keyboard before booting. However, the keyboard will not recognize no matter which I try, so I am trying to do this mouse-only. The hard drive will not be detected. It has something to do with the IDE controller this laptop uses. http://support.gateway.com/s/Mobile/Gatewa...103991sp3.shtml has the specs for this computer. Processor and core logic Processor AMD Athlon™ 64 3400+ Processor Operates at 2.2 GHz 1 MB L2 Cache Level 2 cache 1 MB Chipset-Northbridge ATI RS480M Chipset-Southbridge SB 400 System memory Memory type 333 MHz PC2700 DDR SODIMM Installed memory 512 MB (1 × 512) I know the controller is the culprit because I can get the installation disc to continue while the same drive is plugged into my USB IDE controller. I doubt installing via USB will solve my problem (it is still installing) since the controller probably wont be fixed by the install. Anything else I should be doing that I am not that might help me out? Thanks Update: The installation finished and it wont even boot from USB. ("operating system not found") Link to comment https://www.insanelymac.com/forum/topic/176098-installation-on-gateway-7110gx/ Share on other sites More sharing options...
Recommended Posts