TheBen Posted July 5, 2009 Share Posted July 5, 2009 Hi, I have a computer with the following specs: Mainboard : Asus P5B Chipset : Intel P965 Processor : Intel Core 2 Duo E6600 @ 2400 MHz Physical Memory : 1024 MB (2 x 512 DDR2-SDRAM ) Video Card : ASUS Extreme AX300 Network Card : Realtek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NI Sound Card : 82801H (ICH8 Family) HD Audio Controller I have both iDeneb 1.3 (10.5.5) and iPC OSx86 10.5.6 Universal PPF6 Final v1.1. I wanted to know, which should I use and what drivers to select in the one that will match (iDeneb or iPC) in the Customize section of the installation and if something won't work after that - which fixes should I install. Thank you, Ben P.S So far I tried both of them, but it must be that I'm selecting the wrong drivers as in both installations, after the installation completes and the computer reboots, I get it as the monitor is not attached (although it is of course, as it DID show up in the installation) and therefor I can't access the computer really... EDIT: I just tried one more time and this time I got it all working EXCEPT for the Graphics card. Using EFIStudio I found out the "ATI"'s model name, which is as following: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] (prog-if 00 [VGA controller]). I would really appreciate if someone could help me configure this card, currently I can see the display but I can't change the resolution from the default one and in addition there's always something wrong on the screen, for example there's a square that is not the right color in comparison to the rest of the area. Thanks again. Link to comment https://www.insanelymac.com/forum/topic/173609-help-which-distrodrivers-for-the-following-specs/ Share on other sites More sharing options...
Recommended Posts