BreckSkiBum Posted June 30, 2009 Share Posted June 30, 2009 I followed this guide and was able to successfully install iPC OS x86 10.5.6 on my Aspire One AOA150-ZG5... I'm going to try to over explain, however it's so amazingly simple *It is highly recommended that you update to the latest bios* ^^see attached files for the 3309 bios file (guide is in the readme) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Pre-Installation Notes: 1.)THANK YOU SO VERY MUCH SticMAC™ for the custom AppleHDA fix!!!! --Working internal Mic!!! --Working autoswitching!!! 2.) You may use either the smbios enabler (AppleSMBIOSEFI ) or SticMAC's™ patched AppleSMBIOS.kext... Please do not use both!!! The main difference is that th AppleSMBIOS.kext will show the Hackintosh as a Macbook. 3.) If you choose to not use the 9.5.0 Voodoo Kernel and go with Vanilla you must use the boot flag CODE cpus=1 4.) The 9.5.0 Voodoo Kernel requires the 10.5.5 seatbelt.kext; for some reason using the iPC patch did not work on multiple attempts... that is why I have attached the one that I know works for me. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1.) Boot your burned iPC release via external disc drive 2.) Select you language 3.) Go up to Utilities and open Disk Utility 4.) Highlight the hard disk (not the partition!) 5.) Click partition 6.) Select & name the partion(s)... I use one partition & I call mine MacHD (no spaces) 7.) Click Options 8.) Select GUID (GPT) 9.) Click OK 9.) Apple format to Mac OS Extended (Journaled) 11.) Close Disk Utility once it completes 12.) Skip ahead, select the hard disk/partition that you want to install to, and click continue 13.) Click Customize (lower left hand corner) 14.) Make sure that the iPC OSx86 Base System is checked 15.) Select desired Language Translations 16.) Select Kernels> 9.5.0 Voodoo Kernel 17.) Select Drivers> Audio Drivers> ALC268 (NOT Comatron) 18.) Select Drivers> Ethernet Drivers> Realtek R1000 19.) Select Drivers> Power Management> AppleACPIBatteryManager (chun-nan's) 20.) Fixes and Patches> PS/2 Device Support> PS/2 Keyboard Fix 21.) Fixes and Patches> AppleSMBIOS Patch> AppleSMBIOSEFI (or use the attached AppleSMBIOS.kext with Kext Helper) 22.) Select your desired applications (make sure to include Kext Helper b7, OSx86 Tools Utility, and EFI-Studio) 23.) Click Done and then Install 24.) Upon successful install, follow the setup prompts. 25.) Once at the desktop open Kext Helper b7 26.) Drag the kexts*: HDAEnabler.kext, AppleHDA.kext, AppleIntegratedFramebuffer.kext, AppleIntelGMA950.kext, Natit.kext, and Seatbelt.kext into Kext Helper 27.) Type in your password and click Easy Install 28.) Restart 29.) Make sure that the audio output is set to internal speakers. Ha ha! no need! Autoswitching!!! 30.) Change your Display resolution Should automaticly set to 1024x600 upon restart 31.) Open OSx86 Tools Utility and enable Quartz GL (optional) 32.) Run the OSx86 Tools Utility repair scripts 33.) Under Energy Saver, disable sleep. You should be good to go Other Fixes/Tools: How to get the SD card Reader working How to remove unwanted Menu Bar icons (ie: the eject icon in the upper right hand corner) iSlayer system monitor apps: iStat Nano, iStat Pro, & iStat Menus... pick your favorite ArtGUIScale Widget- See more of the screen! Useful for apps like Photobooth (Link is for release info, Download it Here) Performance boost using the 9.5.0 Voodoo Kernel with "cpus=2" (that's where i first saw it mentioned... it does in fact give a higher xbench!) -Add cpus=2 to com.apple.boot.plist like this: CODE <key>Kernel Flags<key><BR><string>cpus=2</string> Full Trackpad options using the 10.5.5 keyboard.prefpane, again thx goes to volsk! QUOTE(volsk @ Jan 30 2009, 08:10 AM) I've noticed the Keyboard Prefpane doesn't install right. Even when you select the 10.5.5. In 10.5.6 there is a seperate Trackpad prefpane, this doesn't work with the AA0. You can install the 10.5.5 prefpane manually. Download it here and copy it to /System/Library/PreferencePanes/ Now you can adjust the trackpad settings. Hibernation upon closing lid: QUOTE(volsk @ Jan 27 2009, 02:16 PM) How to enable Deep Sleep / Hibernation At installation select Drivers > Power Management > Clamshell Display Support (optional for hibernation at closing lid) Download and install SmartSleep Set SmartSleep to Hibernation Only Disable Secure Virtual Memory --> System Preferences --> Security Reboot and your all set. Note: This is tested to work with the latest Chameleon and Voodoo Kernel Known bugs: Sound is gone after wake With earlier versions of Chameleon sometimes it won't wake. At boot you can enter the boot option "-nowake" to bypass wake and boot normally. In OS X remove /var/vm/sleepimage. . . thx for the post, volsk (get ClamshellDisplay.kext bellow...use Kext Helper!) ^Note on why I left the ClamshellDisplay.kext out of the original install: if you close the lid without hibernation enabled you will have a kernel panic when it tries to go into regular sleep. *UPDATE* March 22nd A user has pointed out that the attached video kext does NOT support monitor output... HOWEVER... the kext "GMA950_output working_tearing" does. choose it only if you must have output... or use both kexts and alternate them. *Download the kexts attached bellow or use SticMAC's Mediafire Link !!!Use either the AppleSMBIOSEFI patcher durring install or SMBIOS.kext after install!!! !!!DO NOT USE BOTH!!! Attached File(s) AppleSMBIOS.kext.zip ( 16.96K ) Number of downloads: 697 SticMAC_s_Audio_fix.zip ( 484.66K ) Number of downloads: 1039 GMA_950_0x27ae.zip ( 197.53K ) Number of downloads: 1021 10.5.5_seatbelt.kext.zip ( 80.38K ) Number of downloads: 844 A150_3309_bios_update_and_guide.zip ( 891.93K ) Number of downloads: 489 ClamshellDisplay.kext.zip ( 16.19K ) Number of downloads: 951 GMA950_output_working_tearing.zip ( 160.43K ) Number of downloads: 463 Everything works except internal Atheros 5006xx wifi card and jMicron SATA SD Card readers... I would appreciate some more help getting these two periphrials working... Thanks BreckSkiBum Link to comment Share on other sites More sharing options...
lilol18 Posted August 29, 2009 Share Posted August 29, 2009 Man, at least you could've included the direct link to that post which is Redliner's. This because of the files needed for this. and for the people, this is the one with the files (kexts). Good luck-intosh "http://www.insanelymac.com/forum/lofiversion/index.php/t149173.html" Link to comment Share on other sites More sharing options...
djpatch Posted July 15, 2010 Share Posted July 15, 2010 its been driving me crazy trying to find the kext files in this post but i found the original post.. here they are!!! http://www.insanelymac.com/forum/index.php?showtopic=149173 Link to comment Share on other sites More sharing options...
Recommended Posts