dyme13 Posted June 29, 2009 Share Posted June 29, 2009 I've looked all over the place and I cant seem to get my sound to work properly. So as a last resort I'm posting here to see if anyone can help me out: This is what I have so far... my audio works through internal speakers but the headphones/mic do not work(are not recognized) I have the following: Codec: Conexant CX20561 (Hermosa) Vendor Id : 0x14f15051 Subsystem Id : 0x103c30cd 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) And the following codec dump: Codec: Conexant CX20561 (Hermosa) Address: 0 Vendor Id: 0x14f15051 Subsystem Id: 0x103c30cd Revision Id: 0x100000 Modem Function Group: 0x2 Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0 Amp-Out vals: [0x2c 0x2c] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0 Amp-Out vals: [0x4a 0x4a] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x44 0x44] [0x44 0x44] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 2 0x1d 0x17* Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x44 0x44] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x16 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x01214030: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=37, enabled=1 Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x17 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00001224: IN Detect Vref caps: 50 80 Pin Default 0x01a19020: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=38, enabled=1 Power: setting=D0, actual=D0 Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00001224: IN Detect Vref caps: 50 80 Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=39, enabled=1 Power: setting=D0, actual=D0 Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x1a [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1b [Pin Complex] wcaps 0x400500: Mono Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x1d [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00000020: IN Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power: setting=D0, actual=D0 Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono Please help! Link to comment Share on other sites More sharing options...
dyme13 Posted July 2, 2009 Author Share Posted July 2, 2009 bump? Link to comment Share on other sites More sharing options...
dyme13 Posted July 4, 2009 Author Share Posted July 4, 2009 bump Link to comment Share on other sites More sharing options...
milan475 Posted July 5, 2009 Share Posted July 5, 2009 tried voodooHDA? http://forum.voodooprojects.org/index.php/topic,234.0.html Link to comment Share on other sites More sharing options...
dyme13 Posted July 5, 2009 Author Share Posted July 5, 2009 yea i did.... didnt help.. Link to comment Share on other sites More sharing options...
dyme13 Posted July 7, 2009 Author Share Posted July 7, 2009 bump Link to comment Share on other sites More sharing options...
Recommended Posts