phate89 Posted May 18, 2009 Share Posted May 18, 2009 hello everyone,,,i installed ideneb 1.3, i don't remember what settings i use for it but it works fine...but after an apptent of update it with the upgrade kit the os stopped working..so i download and try with ideneb 1.4...with this settings: Kernel: 9.5.0 Voodoo (Intel/AMD/SSE2/SSE3) Ethernet: nForceEthernetDriver Fix: AppleSMBIOS 1.0.13 System Utilities: GenericCPUPowerManagementControl Nvidia: NVdarwin 1.2.5 256Mb Audio: AC97Audio Chipset: AppleNForceATA Applicazioni: Adium ASU BetterZip Colloquy Change Finder Kext Helper Menu Meters Onyx OSx86 Tools Pacifist Temperature Monitor Transmission the installation works well..at the end the pc normally reboot and i succeed to configure the user and all the guided configs..but when i confirm the last option and end the configurations the screen became grey/light blue (i don't remember) like when the gui is loading...the mouse works and i can move the punter...but never load the interface and i stay with an empty interface...if i reboot i had the same result..what could be the problem? what i can do? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/ Share on other sites More sharing options...
phate89 Posted May 19, 2009 Author Share Posted May 19, 2009 up Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1159801 Share on other sites More sharing options...
verdant Posted May 19, 2009 Share Posted May 19, 2009 hello everyone,,,i installed ideneb 1.3, i don't remember what settings i use for it but it works fine...but after an apptent of update it with the upgrade kit the os stopped working..so i download and try with ideneb 1.4...with this settings: Kernel: 9.5.0 Voodoo (Intel/AMD/SSE2/SSE3) Ethernet: nForceEthernetDriver Fix: AppleSMBIOS 1.0.13 System Utilities: GenericCPUPowerManagementControl Nvidia: NVdarwin 1.2.5 256Mb Audio: AC97Audio Chipset: AppleNForceATA Applicazioni: Adium ASU BetterZip Colloquy Change Finder Kext Helper Menu Meters Onyx OSx86 Tools Pacifist Temperature Monitor Transmission the installation works well..at the end the pc normally reboot and i succeed to configure the user and all the guided configs..but when i confirm the last option and end the configurations the screen became grey/light blue (i don't remember) like when the gui is loading...the mouse works and i can move the punter...but never load the interface and i stay with an empty interface...if i reboot i had the same result..what could be the problem? what i can do? Do not select GenericCPUPowerManagementControl and nForceEthernetDriver and try with AppleSMBIOS Mac Pro......then boot with -v -f and report what your boot screen shows.....if the screen goes light blue it usually indicates a video driver problem.....intially install OS X without selecting a video, network and audio driver.....concentrate on getting the basic OS X system working..... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1159813 Share on other sites More sharing options...
phate89 Posted May 19, 2009 Author Share Posted May 19, 2009 without GenericCPUPowerManagementControl and nForceEthernetDriver and with AppleSMBIOS Mac Pro the same result...light blue screen...now i try without video, network and audio driver without GenericCPUPowerManagementControl and nForceEthernetDriver and with AppleSMBIOS Mac Pro the same result...light blue screen...now i try without video, network and audio driver Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1159951 Share on other sites More sharing options...
phate89 Posted May 19, 2009 Author Share Posted May 19, 2009 seeems that 6800 gs doesn't work with 10.5.6...how is this possible? with 10.5.5 works http://www.infinitemac.com/f5/geforce-6800...c-10-5-6-t1907/ i don't understand what i have to do to let it work... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1160041 Share on other sites More sharing options...
verdant Posted May 20, 2009 Share Posted May 20, 2009 seeems that 6800 gs doesn't work with 10.5.6...how is this possible? with 10.5.5 works http://www.infinitemac.com/f5/geforce-6800...c-10-5-6-t1907/ i don't understand what i have to do to let it work... You could try using your 10.5.5 versions of NVDAResman.kext and NVDANV40Hal.kext and whichever NVinjector kext you used before, remembering to repair permissions in Terminal: sudo chown -R root:wheel /System/Library/Extensions sudo chmod -R go-w /System/Library/Extensions sudo rm /System/Library/Extensions.mkext then reboot.... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1160676 Share on other sites More sharing options...
phate89 Posted May 20, 2009 Author Share Posted May 20, 2009 You could try using your 10.5.5 versions of NVDAResman.kext and NVDANV40Hal.kext and whichever NVinjector kext you used before, remembering to repair permissions in Terminal: sudo chown -R root:wheel /System/Library/Extensions sudo chmod -R go-w /System/Library/Extensions sudo rm /System/Library/Extensions.mkext then reboot.... yes but how can i do that without accessing to the os that i cannot load? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1160683 Share on other sites More sharing options...
verdant Posted May 20, 2009 Share Posted May 20, 2009 yes but how can i do that without accessing to the os that i cannot load? Can you boot with -v -x......? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161099 Share on other sites More sharing options...
phate89 Posted May 20, 2009 Author Share Posted May 20, 2009 Can you boot with -v -x......? with -v -x i load the os and arrive to the choose of the user..when i enter with my user it stop in the light blue screen Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161115 Share on other sites More sharing options...
verdant Posted May 20, 2009 Share Posted May 20, 2009 with -v -x i load the os and arrive to the choose of the user..when i enter with my user it stop in the light blue screen You need to boot with -s and remove the installed 10.5.6 video kexts by doing as follows: 1. So, after rebooting by typing -s at the boot: prompt and waiting for the prompt :/ root# to appear, type each of the following lines, followed by Enter and then waiting for :/ root# to re-appear: mount -uw / rm -rf /System/Library/Extensions/Ge*.kext rm -rf /System/Library/Extensions/NVD*.kext exit Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161119 Share on other sites More sharing options...
phate89 Posted May 20, 2009 Author Share Posted May 20, 2009 You need to boot with -s and remove the installed 10.5.6 video kexts by doing as follows: 1. So, after rebooting by typing -s at the boot: prompt and waiting for the prompt :/ root# to appear, type each of the following lines, followed by Enter and then waiting for :/ root# to re-appear: mount -uw / rm -rf /System/Library/Extensions/Ge*.kext rm -rf /System/Library/Extensions/NVD*.kext exit and when i removed the kext files how can i install an old kext? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161123 Share on other sites More sharing options...
verdant Posted May 20, 2009 Share Posted May 20, 2009 and when i removed the kext files how can i install an old kext? If you can now boot into OS X with -v -x or just -v, you can use Kext Helper b7 to install the old kexts which you can extract from a 10.5.5 OS X distro .iso image or DVD using Pacifist..... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161136 Share on other sites More sharing options...
phate89 Posted May 21, 2009 Author Share Posted May 21, 2009 If you can now boot into OS X with -v -x or just -v, you can use Kext Helper b7 to install the old kexts which you can extract from a 10.5.5 OS X distro .iso image or DVD using Pacifist..... thanks a lot..now works! now i have to found an old ideneb dvd and install it..thanks again! Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161173 Share on other sites More sharing options...
verdant Posted May 21, 2009 Share Posted May 21, 2009 thanks a lot..now works! now i have to found an old ideneb dvd and install it..thanks again! Glad to help....... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161176 Share on other sites More sharing options...
phate89 Posted May 21, 2009 Author Share Posted May 21, 2009 Glad to help....... after this procedure i try to install imovie (ilife) ..but when i launch it tell me that my video card is not compatible with quartz extreme..what i can do that? (if i have to open unother post in unother location tell me:)) Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161462 Share on other sites More sharing options...
verdant Posted May 22, 2009 Share Posted May 22, 2009 after this procedure i try to install imovie (ilife) ..but when i launch it tell me that my video card is not compatible with quartz extreme..what i can do that? (if i have to open unother post in unother location tell me:)) Under System Profiler do you see under Graphics/Displays: 32MB VRAM Kernel Extension Info: No kext loaded 1024x768 resolution 32-bit Color depth CI Software Driven QE Not Supported then add your device ID to the Info.plist file of NVDAResman.kext, NVDANV40Hal.kext, your chosen NVinjector (either NVinject or NVkush.kext or NVdarwin ), and at the same time set the correct NVCAP string correctly (see here) and replace the IOProbeScore number by 0. The Info.plist is found by going to /System/Library/Extensions/ and for each.kext > Show Contents by right-click > Contents directory > Info.plist Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161648 Share on other sites More sharing options...
Beerkex'd Posted May 22, 2009 Share Posted May 22, 2009 First thing to try when booting up to a blue screen with mousepointer is to plug your monitor into the other output on your video card and reboot. OS X' nVidia drivers seem to prefer the monitor to be plugged in to the output that's closest to the motherboard. Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1161665 Share on other sites More sharing options...
phate89 Posted May 22, 2009 Author Share Posted May 22, 2009 Under System Profiler do you see under Graphics/Displays: 32MB VRAM Kernel Extension Info: No kext loaded 1024x768 resolution 32-bit Color depth CI Software Driven QE Not Supported then add your device ID to the Info.plist file of NVDAResman.kext, NVDANV40Hal.kext, your chosen NVinjector (either NVinject or NVkush.kext or NVdarwin ), and at the same time set the correct NVCAP string correctly (see here) and replace the IOProbeScore number by 0. The Info.plist is found by going to /System/Library/Extensions/ and for each.kext > Show Contents by right-click > Contents directory > Info.plist i don't have NVDAResman.kext and NVDANV40Hal.kext...probably because to let work the os with your procedure i delete it..how can i solve? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162234 Share on other sites More sharing options...
phate89 Posted May 22, 2009 Author Share Posted May 22, 2009 besides the problem of how install NVDAResman.kext and NVDANV40Hal.kext i don't understand where i have to add the device id in the nvinject .info file... sorry but i'm a beginner with the mac world Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162354 Share on other sites More sharing options...
verdant Posted May 23, 2009 Share Posted May 23, 2009 You can install the Leopard nVidia kexts from here..... The Info.plist file can be opened using TextMate, TextWrangler, Property List Editor, TextEdit.....it will be like CFBundleDevelopmentRegion English CFBundleExecutable NVDANV40Hal CFBundleGetInfoString NVDANV40Hal 1.5.18.7 (10.3.0f4) CFBundleIdentifier com.apple.nvidia.nv40hal CFBundleInfoDictionaryVersion 6.0 CFBundleName NVIDIA NV40 Resman Kernel Extension CFBundlePackageType KEXT CFBundleShortVersionString 9.9.99 CFBundleSignature ???? CFBundleVersion 9.9.9 IOKitPersonalities NVidiaRM CFBundleIdentifier com.apple.nvidia.nv40hal IOClass NVDANV40HAL IOMatchCategory IOService IOPCIClassMatch 0x03000000&0xff000000 IOPCIPrimaryMatch 0x004010de&0xfff0ffff 0x00f010de&0xfff0ffff 0x022010de&0xfff0ffff 0x014010de&0xfff0ffff 0x016010de&0xfff0ffff 0x009010de&0xfff0ffff 0x01d010de&0xfff0ffff 0x039010de&0xfff0ffff 0x029010de&0xfff0ffff IOProbeScore 70000 IOProviderClass IOPCIDevice OSBundleCompatibleVersion 1.2.0 OSBundleLibraries com.apple.NVDAResman 1.2.0 com.apple.iokit.IOPCIFamily 1.0.0b1 com.apple.kernel.6.0 7.9.9 com.apple.kernel.iokit 6.0 OSBundleRequired Root and you are looking for <key>IOPCIClassMatch</key> <string>0x03000000&0xff000000</string> <key>IOPCIPrimaryMatch</key> <string>0x004010de&0xfff0ffff 0x00f010de&0xfff0ffff 0x022010de&0xfff0ffff 0x014010de&0xfff0ffff 0x016010de&0xfff0ffff 0x009010de&0xfff0ffff 0x01d010de&0xfff0ffff 0x039010de&0xfff0ffff 0x029010de&0xfff0ffff</string> <key>IOProbeScore</key> <integer>70000</integer> your device ID if not listed should go in the list below IOPCIPrimaryMatch, and IOPCIClassMatch should be as shown here........ Clarifying update: Only in the Info.plist for your NVinjector kext do you need put in the correct NVCAP string and change the IOProbeScore number to 0.......for this Property List Editor is recommended......you need to see the NVCAP string in hexadecimal format for editing.... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162395 Share on other sites More sharing options...
phate89 Posted May 23, 2009 Author Share Posted May 23, 2009 You can install the Leopard nVidia kexts from here..... The Info.plist file can be opened using TextMate, TextWrangler, Property List Editor, TextEdit.....it will be like CFBundleDevelopmentRegion English CFBundleExecutable NVDANV40Hal CFBundleGetInfoString NVDANV40Hal 1.5.18.7 (10.3.0f4) CFBundleIdentifier com.apple.nvidia.nv40hal CFBundleInfoDictionaryVersion 6.0 CFBundleName NVIDIA NV40 Resman Kernel Extension CFBundlePackageType KEXT CFBundleShortVersionString 9.9.99 CFBundleSignature ???? CFBundleVersion 9.9.9 IOKitPersonalities NVidiaRM CFBundleIdentifier com.apple.nvidia.nv40hal IOClass NVDANV40HAL IOMatchCategory IOService IOPCIClassMatch 0x03000000&0xff000000 IOPCIPrimaryMatch 0x004010de&0xfff0ffff 0x00f010de&0xfff0ffff 0x022010de&0xfff0ffff 0x014010de&0xfff0ffff 0x016010de&0xfff0ffff 0x009010de&0xfff0ffff 0x01d010de&0xfff0ffff 0x039010de&0xfff0ffff 0x029010de&0xfff0ffff IOProbeScore 70000 IOProviderClass IOPCIDevice OSBundleCompatibleVersion 1.2.0 OSBundleLibraries com.apple.NVDAResman 1.2.0 com.apple.iokit.IOPCIFamily 1.0.0b1 com.apple.kernel.6.0 7.9.9 com.apple.kernel.iokit 6.0 OSBundleRequired Root and you are looking for <key>IOPCIClassMatch</key> <string>0x03000000&0xff000000</string> <key>IOPCIPrimaryMatch</key> <string>0x004010de&0xfff0ffff 0x00f010de&0xfff0ffff 0x022010de&0xfff0ffff 0x014010de&0xfff0ffff 0x016010de&0xfff0ffff 0x009010de&0xfff0ffff 0x01d010de&0xfff0ffff 0x039010de&0xfff0ffff 0x029010de&0xfff0ffff</string> <key>IOProbeScore</key> <integer>70000</integer> your device ID if not listed should go in the list below IOPCIPrimaryMatch, and IOPCIClassMatch should be as shown here........ Clarifying update: Only in the Info.plist for your NVinjector kext do you need put in the correct NVCAP string and change the IOProbeScore number to 0.......for this Property List Editor is recommended......you need to see the NVCAP string in hexadecimal format for editing.... when i finish to install the pkg of kext file from my link the screen becomes gray with write that i have to reboot because there's a problem..now the o.s. boot onli in -v -x mode... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162559 Share on other sites More sharing options...
verdant Posted May 23, 2009 Share Posted May 23, 2009 when i finish to install the pkg of kext file from my link the screen becomes gray with write that i have to reboot because there's a problem..now the o.s. boot onli in -v -x mode... Since you have installed 10.5.6 via iDeneb v1.4, try my 10.5.6 nVidia kexts from here.......if you still have problems you may need to use Pacifist to extract OpenGL.framework from the 10.5.6 Combo Update to /System/Library/Frameworks/OpenGL.framework....... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162615 Share on other sites More sharing options...
phate89 Posted May 23, 2009 Author Share Posted May 23, 2009 Since you have installed 10.5.6 via iDeneb v1.4, try my 10.5.6 nVidia kexts from here.......if you still have problems you may need to use Pacifist to extract OpenGL.framework from the 10.5.6 Combo Update to /System/Library/Frameworks/OpenGL.framework....... sorry if i wrote the first time in italian... so i have to install all? and i load the os with -v -x? Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162630 Share on other sites More sharing options...
verdant Posted May 23, 2009 Share Posted May 23, 2009 sorry if i wrote the first time in italian... so i have to install all? and i load the os with -v -x? If you can boot OS X with -v -x to get past the graphics problem hopefully.....then use Kext Helper b7 to install the 10.5.6 nvidia kexts and if necessary use Pacifist to extract and install the OpenGL.framework..... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162653 Share on other sites More sharing options...
phate89 Posted May 23, 2009 Author Share Posted May 23, 2009 If you can boot OS X with -v -x to get past the graphics problem hopefully.....then use Kext Helper b7 to install the 10.5.6 nvidia kexts and if necessary use Pacifist to extract and install the OpenGL.framework..... installing your nvidia kext the os stops on light blue screen again... but with the procedure i remove the nvidia kext so the quartz are not supported... Link to comment https://www.insanelymac.com/forum/topic/166808-ideneb-installed-but-dont-enter-in-the-os/#findComment-1162670 Share on other sites More sharing options...
Recommended Posts