infinitevalence Posted May 2, 2006 Share Posted May 2, 2006 Hardware: Link * Denotes optinal hardware on the Z63A purchased by the user # Denotes untested hardware Intel® Pentium® M Processor 735, pin modified to run at 2.26GHz * Intel 915GM & ICH6-M 1GB GSkill PC5400 * 14” WXGA (1280 x 768) TFT display Intel 900 GMA graphics core Seagate 120GB 5400RPM Hard Drive * TSST DVD-RW/DVD+RW Dual Layer module * Support Module Hot Swap Function and 2nd HDD/2nd Battery Marvel Yukon 8001 10/100/1000 Mbps Fast Ethernet controller Atheros AR5212A B/G Wireless * 3 x USB 2.0 ports 1 x VGA port/Mini D-sub 15-pin for external monitor 1 x IEEE 1394 port 1 x Card Reader # 1 x 32-bit PC CardBus 1.0 architecture # 2 x Audio jack: Audio out (SPIDIF) / Mic-in # 1 x Type II PCMCIA slot # 1 x RJ11 connector fro Modem # 1 x RJ45 connector for Ethernet 1 x TV-out (S-Video) # Built-in Azalia compliant audio chip, with 3D effect & full dulplex Built-in speaker and microphone Li-Ion 8 cell: 4400mAh, 4S2P, 65W/Hrs Run-time: 4+ Hrs, Optional 2nd Battery 9+ Hrs 13” x 9.7” x 1.18”~1.29” inches (WXDXH) - 4.8lbs Using the Jas install DVD all core hardware works with minimal work. The external VGA requires pins 2 and 12 to be shorted link. The Marvel network requires a kext update link. The battery and ACPI work with a kext update link. Link to comment https://www.insanelymac.com/forum/topic/16511-asus-z63awv3-working/ Share on other sites More sharing options...
Recommended Posts