Syde Space Posted April 13, 2009 Share Posted April 13, 2009 Soooo, I'm currently downloading the latest (I believe) Image.iATKOS 5i 10.5.5. I am mainly concerned with any problems I may come across. I'm not new to the entire OSx86 ordeal. My success in past installations have varied using iATKOS, Kalyway, TohLeo, and Leo4All. I've taken off from these adventures(MUCH sarcasm) for about a year, and am interested once again. My PC's specs are no where near heavenly. I just copied and pasted from the webpage, so I hope I have everything needed. I'd also like to know if there are any drivers I should download before hand, as well as any configurations that are mandatory for this installation to run as smoothly as possible on my PC. Thank you for your time. Intel® Celeron® D Processor 3561 64-bit processor with Intel® EM64T Technology (3.33GHz, 533MHz FSB, 512KB L2 cache) Operating System: Genuine Windows Vista® Home Basic Chipset: Intel® 945G Memory: 512MB DDR2 dual channel capable (1 × 512MB), 533MHz (PC4200) Expandable to 2GB 2 DDR2 Slots (Total) | 1 DDR2 Slot (Available) Hard Drive: 120GB SATA II (7200rpm)2 Optical Drive: CD-RW/DVD Combo Drive 48x max. write (48×32×48×16) Video: Intel® Graphics Media Accelerator 950 Up to 224MB of shared video memory PCI-Express® (PCI-E x16) slot available Sound: 6-channel (5.1) high-definition audio Amplified Stereo Speakers (USB Powered) Communications: 56K ITU V.92-ready fax/modem (RJ-11 port) Intel® 10/100Mbps Ethernet LAN (RJ-45 port) Peripherals: Multifunction keyboard, 2-button wheel mouse (PS/2) Ports/Other: 6 - USB 2.0 ports (2 in front, 4 in back) 1 - VGA 1 - Parallel port 1 - Serial port 2 - PS/2 ports (keyboard and mouse) 3 - Audio (Rear): Line-in/Side (Stereo), Front/Headphone (Stereo), Microphone 2 - Audio (Front): Microphone, Front/Headphone (Stereo) 1 - RJ-45 Ethernet port 1 - RJ-11 Modem port Link to comment Share on other sites More sharing options...
madwh Posted April 13, 2009 Share Posted April 13, 2009 10.5.6 is the latest, I would try this website for info about hardware http://www.osx86library.com/ For more help try on IRC server: fusion.osx86.hu and channel #hackint0sh , good luck. Link to comment Share on other sites More sharing options...
Syde Space Posted April 19, 2009 Author Share Posted April 19, 2009 10.5.6 is the latest, I would try this website for info about hardware http://www.osx86library.com/ For more help try on IRC server: fusion.osx86.hu and channel #hackint0sh , good luck. I had a successful install, but have no internet or sound. Leopard isn't recognizing my m-audio firewire solo. I downloaded the most recent drivers, but still says that it isn't plugged in. Not recognizing my internet either. Not sure of my ethernet drivers, but I have a motorola surfboard cable modem. Thanks for any help. Link to comment Share on other sites More sharing options...
Millentree10 Posted July 7, 2009 Share Posted July 7, 2009 I had a successful install, but have no internet or sound. Leopard isn't recognizing my m-audio firewire solo. I downloaded the most recent drivers, but still says that it isn't plugged in. Not recognizing my internet either. Not sure of my ethernet drivers, but I have a motorola surfboard cable modem. Thanks for any help. You say Sound: 6-channel (5.1) high-definition audio What kind? Mine is SigmaTel for example. Is it RealTek? EDIT: Oh, I see now. You have SigmeTel Audio chipset and are going to need to tell me the version (9200 / 9250 /etc.) follow this guide for Ethernet. Intel PRO/100 VE Connection Issues Link to comment Share on other sites More sharing options...
Recommended Posts