Jump to content

RESTART FIX? PLEASE HELP!


1 post in this topic

Recommended Posts

Ok I have tried extracting many AppleACPIPlatform.kext files from iPC, iATKOS, LEO4ALL, KALYWAY, iDENEB and I have downloaded many times from many places. I was able to install ONE AppleACPIPlatform.kext that allows me to restart from safe mode but the system will not restart in normal mode. But when i first installed this kext I had lost my keyboard and mouse on my laptop. I then had to go find a PS2 fix. The fix worked but it disabled the restart in safe mode. I then reinstalled the same AppleACPIPlatform.kext again and fixed ALL permisions on my hackintosh and now I'm stuck at I can only restart from safe mode not normal mode.

 

I also do not have sleep working!

 

I have a Gateway here is the specs:

MX6958 Notebook Specifications

 

Processor Intel® Centrino® Duo Mobile Technology

Intel® Core™ Duo processor T2050

1.60 GHz | 2 MB L2 Cache | 533 MHz FSB

Screen 15.4-inch Ultrabright™ WXGA TFT (1280 × 800)

Chipset Intel® 945GM

Memory 1024 MB 533 MHz DDR2 Dual Channel memory (2 × 512 MB)

Total slots: 2 DDR2 slots | Available slots: 0 DDR2 slots

Video Intel® Graphics Media Accelerator 950

Up to 128 MB shared video memory

Audio High Definition 2-channel audio

Hard drive 120 GB SATA hard drive (5400 RPM)

Optical drive DVD+/-RW Multi-Format Double Layer (up to 8.5 GB)

Write maximum: 8X DVD+/-R, 6X DVD-RW, 8X DVD+RW, 2X DVD-R DL, 2.4X DVD+R DL, 5x DVD-RAM, 24X CD-R and 16X CD-RW discs

Read maximum: 24X CD-R/RW/ROM, 8X DVD-R/RW/ROM, 4X DVD+/-R DL, RAM, discs

 

Media reader 4-in-1 Digital Media Manager

Memory Stick®

Memory Stick Pro®

Multimedia Card™

Secure Digital™

Modem 56K ITU V.92 ready Fax/Modem (RJ-11 port)

Network

10/100 Mbps built-in Ethernet

Intel® PRO/Wireless LAN 802.11a/b/g (3945ABG)

Interfaces

4 - USB 2.0 ports

1 - VGA external connector

1 - S-Video connector

1 - IEEE 1394 port

1 - RJ11 (modem)

1 - RJ45 (Ethernet LAN)

1 - Microphone In

1 - Headphone / Audio Out

1 - Kensington lock slot

1 - AC adapter connector

Pointing device Integrated Synaptics touchpad with vertical scroll zone

PCMCIA 1 - Type I or Type II; Card Bus

 

I have also yet to get the card reader, dvd burner, s-video, touch pad scroll, and i have a bluetooth (on its way) working.

 

ANY HELP IS HELP I'M @ A DEAD END WITH THE RESTART!

(NOTE: If the topic needs to be moved please do so)

 

THANKS FOR THE HELP!!!

Link to comment
Share on other sites

 Share

×
×
  • Create New...