bogoos Posted April 3, 2009 Share Posted April 3, 2009 hi i have a acer aspire 5610 laptop with: core duo 1,67 T2300 geforce 7300 Go 120GB IDE hdd broadcom lan broadcom wifi (replaced from intel 3945 to get it working on leopard) broadcom bluetooth this is my lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) 06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) 06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) 06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) 06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01) 06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01) and dmesg </string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> Couldn't alloc class "EHCISleepEnabler" IOPCCardBridge::start failed [HCIController][configurePM] power parent ready after 1 tries Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST9120821A ST9120821A/IOFDiskPartitionScheme/Untitled 3@3 BSD root: disk0s3, major 14, minor 4 Jettisoning kernel linker. Resetting IOCatalogue. VGA: family specific matching fails Matching service count = 3 Matching service count = 5 Matching service count = 5 Matching service count = 5 Matching service count = 5 Matching service count = 5 BTCoexistence feature not supported! wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.38.27 NVDANV40HAL loaded and registered. ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = f3) => fa ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = 66) => fa ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = 88) => fe ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = f3) => fa ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = 66) => fa ApplePS2Trackpad: Sentelic FSP: fsp_ps2_command(cmd = 0) => fe ApplePS2Trackpad: Sentelic FSP: fsp_reg_read(reg = 0) => 66 ApplePS2Trackpad: Synaptics TouchPad v6.2 - Naiw synaptics testing 1.0b1! ALCinject: Starting. ALCinject: Setting built-in=<data not shown> ALCinject: Setting layout-id=<data not shown> NVDANV50HAL loaded and registered. VGA: family specific matching fails VGA: family specific matching fails VGA: family specific matching fails VGA: family specific matching fails NVdarwin: Probing. NVdarwin: Setting NVPM=<data not shown> NVdarwin: Setting NVCAP=<data not shown> NVdarwin: Setting rom-revision=NVdarwin 1.2.5 NVdarwin: Setting @0,compatible=NVDA,NVMac NVdarwin: Setting @1,name=NVDA,Display-B NVdarwin: Setting @2,hwsensor-params-version=<data not shown> NVdarwin: Setting @0,name=NVDA,Display-A NVdarwin: Setting @1,compatible=NVDA,NVMac NVdarwin: Setting @2,compatible=NVDA,sensor-parent NVdarwin: Setting @2,device_type=NVDA,gpu-diode NVdarwin: Setting @1,device_type=display NVdarwin: Setting @0,device_type=display NVdarwin: Setting name=display NVdarwin: Setting device_type=NVDA,GeForce NVdarwin: Setting @2,hwctrl-params-version=<data not shown> NVdarwin: Setting VRAM,totalsize=<data not shown> NVdarwin: Setting @2,name=sensor-parent NVdarwin: Setting model=NVIDIA GeForce Go 7300 VGA: family specific matching fails Matching service count = 0 NVdarwin: Probing. NVdarwin: Setting NVPM=<data not shown> NVdarwin: Setting NVCAP=<data not shown> NVdarwin: Setting rom-revision=NVdarwin 1.2.5 NVdarwin: Setting @0,compatible=NVDA,NVMac NVdarwin: Setting @1,name=NVDA,Display-B NVdarwin: Setting @2,hwsensor-params-version=<data not shown> NVdarwin: Setting @0,name=NVDA,Display-A NVdarwin: Setting @1,compatible=NVDA,NVMac NVdarwin: Setting @2,compatible=NVDA,sensor-parent NVdarwin: Setting @2,device_type=NVDA,gpu-diode NVdarwin: Setting @1,device_type=display NVdarwin: Setting @0,device_type=display NVdarwin: Setting name=display NVdarwin: Setting device_type=NVDA,GeForce NVdarwin: Setting @2,hwctrl-params-version=<data not shown> NVdarwin: Setting VRAM,totalsize=<data not shown> NVdarwin: Setting @2,name=sensor-parent NVdarwin: Setting model=NVIDIA GeForce Go 7300 GenericCPUPowerManagement: GenericCPUPowerManagement.kext 1.1.3 (Release) Dec 14 2008 17:53:36 [1050] GenericCPUPowerManagement: © 2008 Superhai, All Rights Reserved AppleBCM440XEthernet: Ethernet address 00:16:d4:5b:ac:c4 AirPort_Brcm43xx: Ethernet address 00:16:e3:8a:3b:9e NTFS driver 2.1 [Flags: R/O]. NTFS volume name , version 3.1. NTFS volume name , version 3.1. ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out AirPort: Link Down on en1 Auth result for: 00:18:f8:eb:c0:3b MAC AUTH succeeded AirPort: Link Up on en1 everything works exept card reader,pcmcia and camera but the main problem is that i cant get shut down to work.... system reboots fine but when i try to shut it down with option from menu i shuts ok but the power is stil present, fans spin and LEDs are on and i have to press power for 5 sec to shut it down completly. with sleep there is the same issue, i have to turn it off manualy and reload from sleep doesyn't work (it boots up normaly insted). I am using vanilla kernel. I have tryed dsdt patching, several boot loaders, psystar openhaltrestart and still can't get shutdown work. I have iDeneb 1.4 10.5.6 but even with 10.5.5 i couldn't get shutdown to work (as i remember). any clue?? please help me Link to comment Share on other sites More sharing options...
bogoos Posted April 5, 2009 Author Share Posted April 5, 2009 bump Link to comment Share on other sites More sharing options...
Recommended Posts