Maurox19 Posted March 31, 2009 Share Posted March 31, 2009 Hi! I installed iDeneb 10.5.5 and I want configure my wireless card. It's a Ralink RT2500 PCI. I download the driver from the official site but it not works! In fact when I start the application Ralink Wireless Utility the output is: "No device!!". How can I resolve? Thanks and by. Link to comment Share on other sites More sharing options...
Thor Erik Posted March 31, 2009 Share Posted March 31, 2009 I got a RT25xx based usb dongle, and what i did was basicly install it without it in, then reboot, at the boot menu i added the options -v -f and then plugged it in after i pressed enter, in your case I'd boot up without it in first, then shut down and insert the card. I did try several times before it worked, combined with both dlink and ralink's own and both at the same time etc. they both uses the same kext though ra2500rt.kext(i think) Link to comment Share on other sites More sharing options...
_Nihil_ Posted July 27, 2009 Share Posted July 27, 2009 hi! i have the same PCI WiFi Card from Canyon with RT2500 Ralink Chipset!! Nothing is shown under system profiler and i've also tried to modify the info.plist inside the IOPCIfamily.kext adding the product and vendor id (0X18140201) but nothing happens and the leds are down. Under linux or windows the card works properly. Hoe can i fix this problem? Link to comment Share on other sites More sharing options...
_Nihil_ Posted July 29, 2009 Share Posted July 29, 2009 bump! Link to comment Share on other sites More sharing options...
Recommended Posts