BlincOSX Posted March 23, 2009 Share Posted March 23, 2009 Ok so heres my dilemma I've been trying to install osx86 on my machine for 4 days now I've tried leo4allv3 wouldnt even make it to the install. I've tried jAs 10.5.6 client / server sse2/sse3 intel amd it told me that the file system was read only.... iDeneb however has been the only one to actually complete the install process but when i goto boot it hangs at the grey apple and gear screen, like it will start loading and then the gear just stops moving and the system halts. I've tried different boot flags -x -v -f -cpus=1 etc. Still to no avail. System Specs are as follows straight from CPU-Z: Processors Information ------------------------------------------------------------------------------------ Processor 1 (ID = 0) Number of cores 1 (max 1) Number of threads 2 (max 2) Name Intel Pentium 4 Codename Northwood Specification Intel® Pentium® 4 CPU 3.20GHz Package Socket 478 mPGA (platform ID = 2h) CPUID F.2.9 Extended CPUID F.2 Brand ID 9 Core Stepping D1 Technology 0.13 um Core Speed 3207.4 MHz (16.0 x 200.5 MHz) Rated Bus speed 801.9 MHz Stock frequency 3200 MHz Instructions sets MMX, SSE, SSE2 L1 Data cache 8 KBytes, 4-way set associative, 64-byte line size Trace cache 12 Kuops, 8-way set associative L2 cache 512 KBytes, 8-way set associative, 64-byte line size FID/VID Control no Chipsets ---------------------------------------------------------------------- Northbridge Intel i865P/PE/G/i848P rev. A2 Southbridge Intel 82801EB (ICH5) rev. 02 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR Memory Size 1024 MBytes Channels Dual Memory Frequency 160.4 MHz (5:4) CAS# 2.5 RAS# to CAS# 3 RAS# Precharge 3 Cycle Time (tRAS) 7 Performance Mode disabled Video Card -------------------------------------------------------- Nvidia GeForce FX 5600 512mb Sound Card -------------------------------------------------------- Realtech Audio (but AC drivers work fine with it) -------------------------------------------------------- Any help with the problem would be greatly appreciated. Link to comment https://www.insanelymac.com/forum/topic/158841-ideneb-v14-leopard-1056-help/ Share on other sites More sharing options...
BlincOSX Posted March 25, 2009 Author Share Posted March 25, 2009 FOUND A SOLUTION !!!!!! boot from cd to do so boot up with the cd in the drive when it comes up type in rd=diskXsX ( replace the "x"s with what ever drive you installed osx86 onto will resolve issue, atleast it did for me) Link to comment https://www.insanelymac.com/forum/topic/158841-ideneb-v14-leopard-1056-help/#findComment-1115017 Share on other sites More sharing options...
Recommended Posts