Kevin_NL Posted March 23, 2009 Share Posted March 23, 2009 I tried to install with iDeneb. (10.5.5). It didnt work, obviously. It looks like all is just fine, but after the last line it stops doing anything. Specs of my pc are: - P5QL-CM - Intel E8400 (C2D family) - NVidia 9800gtx+ graphics (and yes, I did install NVinject 512) So if anyone can help me get my hand off my face, that would be really appreciated. Thanks in advance Link to comment https://www.insanelymac.com/forum/topic/158780-osx-installed-with-ideneb-without-problems-now-to-let-it-boot/ Share on other sites More sharing options...
Kevin_NL Posted March 23, 2009 Author Share Posted March 23, 2009 Is it maybe something with the kernel or driver patches? or would it not install then anyway? Link to comment https://www.insanelymac.com/forum/topic/158780-osx-installed-with-ideneb-without-problems-now-to-let-it-boot/#findComment-1113775 Share on other sites More sharing options...
verdant Posted March 24, 2009 Share Posted March 24, 2009 Is it maybe something with the kernel or driver patches? or would it not install then anyway? If your System Hangs after Boot Screen Message: "Mac framework successfully initialized Using XXXX buffer headers and 4096 cluster IO buffer headers" where XXXX may be 16384, 14805, 5242 typically...... XXXX Number Explanation: 16384 is reported to indicate ≥ 4GB RAM 14805 is reported to indicate 2GB RAM The Error Cause may be: ACPIPlatform.kext and/or AppleAPIC.kext and/or IOACPIFamily.kext The Error Solution may be: Replace ACPIPlatform.kext and/or AppleAPIC.kext and/or IOACPIFamily.kext with compatible version(s); generally found in older distros...…or as an "ACPI Fix" or "ACPI-APIC Old" or similar in recent distros..... HOWEVER, if different versions of these kexts do not resolve the error, then you may need a modified-DSDT BIOS……this is because the DSDT is a part of the ACPI subsystem. Link to comment https://www.insanelymac.com/forum/topic/158780-osx-installed-with-ideneb-without-problems-now-to-let-it-boot/#findComment-1114070 Share on other sites More sharing options...
jabalsad Posted July 8, 2009 Share Posted July 8, 2009 I also have the same issue: stops booting after reaching that line. Everyone on the forums speaks of 'replacing the acpi kext files with working ones' but can someone please elaborate on how to do this? Do I replace it on the install CD or on the hard drive installation? How do I replace it on the hard drive if the PC wont boot in the first place? Where exactly do I get working files? Link to comment https://www.insanelymac.com/forum/topic/158780-osx-installed-with-ideneb-without-problems-now-to-let-it-boot/#findComment-1195488 Share on other sites More sharing options...
michaelz Posted September 28, 2009 Share Posted September 28, 2009 Dear friends, I have the same motherboard P5QL-CM and I had the same problem listed here. We had the problem with all the Leopard DVD´s and I solved it flashing my BIOS with a compatible firmware. Now I had a Original installation of Leopard 10.5.8 Retail with all my hardware working. I also installed Snow Leopard but without sound, so I decided to reinstall Leopard 10.5.8. The neccesary file is in this post PQ5 Series Bios Firmware so looking for the correct one (P5QL-CM obviously). After that I could run any Leopard DVD, in your case any Hackintosh DVD. I hope this helps you. Link to comment https://www.insanelymac.com/forum/topic/158780-osx-installed-with-ideneb-without-problems-now-to-let-it-boot/#findComment-1283263 Share on other sites More sharing options...
Recommended Posts