Driver for Intel ICH8 family SATA AHCI controller, ICH8 family PATA controller

[dasrew]

I don't know which drivers to install from this long list-> http://######.com/ipcosx86/?page_id=96 for my Intel GM965 / ICH 8-M chipset. Do I install the Intel ICHx SATA drivers and Intel ICH10 SATA Support?

[thorazine74]

You should need no extra drivers for any of them, provided its set up as AHCI. The SATA ports will show up as "Unknown AHCI Controller" but they should work anyway. You can install a LegacyAppleAHCI.kext later when you have OS X running for proper detection. The PATA ports should work with the vanilla IntelPIIXATA (if its device id 2850). If it doesnt you can always install dune's modded IntelPIIXATA kext later afer installing too (assuming you are installing to a SATA HD, so you would not need PATA support to boot).

[dasrew]

You should need no extra drivers for any of them, provided its set up as AHCI. The SATA ports will show up as "Unknown AHCI Controller" but they should work anyway. You can install a LegacyAppleAHCI.kext later when you have OS X running for proper detection. The PATA ports should work with the vanilla IntelPIIXATA (if its device id 2850). If it doesnt you can always install dune's modded IntelPIIXATA kext later afer installing too (assuming you are installing to a SATA HD, so you would not need PATA support to boot).

 

Thank you very much