Pyth0n Posted February 19, 2009 Share Posted February 19, 2009 This is the Linux codec dump for the ADI 1882 that is located at the Lenovo ThinkCentre M57 Model 6806. This card is named Intel High Definition Audio Interface under Windows. It seens that this name share a lot of codecs some of them are ALC. Just can't get it to work. I managed to get OS X working in this Lenovo ThinkCentre M57 with only the UInstaller default kexts. Except for the Intel Ethernet everything is under Apple Kexts care. Using a nVidia 9600GT. AppleHDA Patcher - 2006/2007 by Taruga v1.20 _______________________________________________________ Codec : Analog Devices AD1882 Vendor Id : 0x11d41882 Subsystem Id : 0x17aa3037 _______________________________________________________ * Detected unsupported Analog Codec Here's the codec dump Codec: Analog Devices AD1882Address: 2 Vendor Id: 0x11d41882 Subsystem Id: 0x17aa3037 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x1ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x1e0]: 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 1 0x1d Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x19 0x19] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x06 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x100501: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Connection: 1 0x0c Node 0x09 [Audio Input] wcaps 0x100501: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Connection: 1 0x0d Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Selector] wcaps 0x300301: Stereo Digital Connection: 2 0x08* 0x09 Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7] Connection: 10 0x11* 0x39 0x3a 0x3b 0x3c 0x18 0x3b 0x3b 0x12 0x20 Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7] Connection: 10 0x11* 0x39 0x3a 0x3b 0x3c 0x18 0x3b 0x3b 0x12 0x20 Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x00] Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083f: IN OUT HP Detect Trigger ImpSense Pin Default 0x02214030: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 1 0x22 Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003f: IN OUT HP EAPD Detect Trigger ImpSense EAPD 0x0: Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 1 0x29 Node 0x13 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00] Pincap 0x0810010: OUT EAPD EAPD 0x0: Pin Default 0x911711f0: [Fixed] Speaker at Int Rear Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power: setting=D0, actual=D0 Connection: 1 0x2d Node 0x14 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x083727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19021: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181302e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0xe Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x2c Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0817: OUT Detect Trigger ImpSense Pin Default 0x41011012: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x2a Node 0x17 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19020: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x26 Node 0x18 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x99331122: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x19 [Power Widget] wcaps 0x500500: Mono Power: setting=D0, actual=D0 Connection: 2 0x20* 0x21 Node 0x1a [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x91f711f0: [Fixed] Other at Int Rear Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0810: OUT Pin Default 0x4145f1a0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Other DefAssociation = 0xa, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Audio Mixer] wcaps 0x200303: Stereo Digital Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x01 0x0b Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x21 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x19 0x19] [0x80 0x80] Connection: 8 0x39 0x3a 0x11 0x12 0x3c 0x3b 0x18 0x1a Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 1 0x20 Node 0x22 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x37 0x21 Node 0x23 [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: -22 Node 0x24 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0817: OUT Detect Trigger ImpSense Pin Default 0x41016011: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x27 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x21 Node 0x27 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x21 Node 0x28 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x29 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x21 Node 0x2a [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x03 0x21 Node 0x2b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x2c [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x03 0x21 Node 0x2d [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x1e Node 0x2e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x2f [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: 3 0x14* 0x15 0x17 Node 0x30 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x31 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x32 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x33 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x34 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x35 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x36 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x37 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x03 0x04* Node 0x38 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x39 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x14 Node 0x3a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x15 Node 0x3b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x3c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x17 Link to comment Share on other sites More sharing options...
machead5678 Posted March 13, 2009 Share Posted March 13, 2009 Hi, Got your PM, sorry I have not replied sooner. I might be wrong, because I have never done this before. It looks like that the AppleHDA patch you are using does not support your card. It also looks like the codec/card is an Analog Devices card and I have a diffrent model of an Analog Devices card. Check out my post: http://www.insanelymac.com/forum/index.php?showtopic=97201 which might give you sound. Let me know if it works and PM me if it does/does not work. Kind Regards, machead Link to comment Share on other sites More sharing options...
Pyth0n Posted March 17, 2009 Author Share Posted March 17, 2009 Hi,Got your PM, sorry I have not replied sooner. I might be wrong, because I have never done this before. It looks like that the AppleHDA patch you are using does not support your card. It also looks like the codec/card is an Analog Devices card and I have a diffrent model of an Analog Devices card. Check out my post: http://www.insanelymac.com/forum/index.php?showtopic=97201 which might give you sound. Let me know if it works and PM me if it does/does not work. Kind Regards, machead It doesn't work at all. Some drivers I tried show that there's a soundcard in the System Profiler but It don't get any info about the card because it doesn't recognize the codec I guess. This one simply didn't show anything. Link to comment Share on other sites More sharing options...
Recommended Posts