heinz99 Posted February 14, 2009 Share Posted February 14, 2009 Hallo, nach sehr vielen Tagen des Probierens läßt sich iDenneb automatisch installieren. Es läßt sich starten, aber keine Hardware wie Sound, Netzwerkkarte,WLan und Usb funktionieren. Selbst eine CD läßt sich nicht lesen. Nach vielen probieren hatte ich im Manager zwar eine aktive WLAN-Karte aber sie blieb gelb. Fand auch keine WLAN-Netze. Wenn ich eine manuelle Installation wage mit dem Kernel 9.5, dannpassiert folgendes: er startet bis ich einen blauen Hintergrund erhalte. Dann wird der Bildschirm schwarz und eine Melodie wird gespielt. Danach rappelt zwar die Festplatte in bestimmten Abständen, aber es tut sich nicht weiter. Weiter unten habe ich die Hardwareauflistung. Welche Treiber kann ich bei der manuellen Installation auswählen? Für eure Hilfe schon mal vielen Dank im voraus. MfG Heinz99 Edit: Entschuldigt: oben muß es natürlich "Anpassung" heißen. HDD FUJITSU MHY2200BH Monitor LPLE300: PnP-Monitor (Standard) [NoDB] Optical HL-DT-ST DVDRAM GSA-T20N ATA Device PCI/AGP 11AB-4353: Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller [NoDB] PCI/AGP 168C-001C: Atheros AR5007EG Wireless Network Adapter [NoDB] PCI/AGP 8086-2815: Intel(R) ICH8M LPC Interface Controller - 2815 [NoDB] PCI/AGP 8086-2829: Intel(R) 82801HEM/HBM SATA AHCI Controller [NoDB] PCI/AGP 8086-2830: Intel(R) ICH8 Family USB Universal Host Controller - 2830 [NoDB] PCI/AGP 8086-2831: Intel(R) ICH8 Family USB Universal Host Controller - 2831 [NoDB] PCI/AGP 8086-2832: Intel(R) ICH8 Family USB Universal Host Controller - 2832 [NoDB] PCI/AGP 8086-2834: Intel(R) ICH8 Family USB Universal Host Controller - 2834 [NoDB] PCI/AGP 8086-2835: Intel(R) ICH8 Family USB Universal Host Controller - 2835 [NoDB] PCI/AGP 8086-2836: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836 [NoDB] PCI/AGP 8086-283A: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A [NoDB] PCI/AGP 8086-283E: Intel(R) ICH8 Family SMBus Controller - 283E [NoDB] PCI/AGP 8086-283F: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F [NoDB] PCI/AGP 8086-2841: Intel(R) ICH8 Family PCI Express Root Port 2 - 2841 [NoDB] PCI/AGP 8086-284B: High Definition Audio-Controller [NoDB] PCI/AGP 8086-2850: Intel(R) ICH8M Ultra ATA Storage Controllers - 2850 [NoDB] PCI/AGP 8086-2A00: Mobile Intel(R) PM965/GM965/GL960 Express Processor to DRAM Controller - 2A00 [NoDB] PCI/AGP 8086-2A02: Mobile Intel(R) 965 Express Chipset Family [NoDB] PCI/AGP 8086-2A03: Mobile Intel(R) 965 Express Chipset Family [NoDB] [ Display adapters / Mobile Intel(R) 965 Express Chipset Family ] Geräteeigenschaften: Gerätebeschreibung Mobile Intel(R) 965 Express Chipset Family Hardwarekennung PCI\VEN_8086&DEV_2A03&SUBSYS_0769152D&REV_03 Location Information @system32\drivers\pci.sys,#65536;PCI bus %1, device %2, function %3;(0,2,1) [ High Definition Audio-Controller [NoDB] ] Geräteeigenschaften: Gerätebeschreibung High Definition Audio-Controller [NoDB] Bustyp PCI Express Bus / Gerät / Funktion 0 / 27 / 0 Geräte ID 8086-284B Subsystem ID 152D-0769 Geräteklasse 0403 (High Definition Audio) Revision 03 Fast Back-to-Back Transactions Nicht [ DVD/CD-ROM drives / HL-DT-ST DVDRAM GSA-T20N ATA Device ] [ Network adapters / Atheros AR5007EG Wireless Network Adapter ] Geräteeigenschaften: Hardwarekennung PCI\VEN_168C&DEV_001C&SUBSYS_01051A32&REV_01 Location Information @system32\drivers\pci.sys,#65536;PCI bus %1, device %2, function %3;(2,0,0) PCI-Geräte Atheros AR5007EG Wireless Network Adapter [NoDB] Gerätebeschreibung Atheros AR5007EG Wireless Network Adapter [NoDB] Bustyp PCI Express x1 Bus / Gerät / Funktion 2 / 0 / 0 Geräte ID 168C-001C Subsystem ID 1A32-0105 Geräteklasse 0200 (Ethernet Controller) Revision 01 Fast Back-to-Back Transactions Nicht unterstützt [ Network adapters / Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller ] Geräteeigenschaften: Gerätebeschreibung Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller Hardwarekennung PCI\VEN_11AB&DEV_4353&SUBSYS_0769152D&REV_14 Location Information @system32\drivers\pci.sys,#65536;PCI bus %1, device %2, function %3;(3,0,0) [ Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller [NoDB] ] Geräteeigenschaften: Gerätebeschreibung Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller [NoDB] Bustyp PCI Express x1 Bus / Gerät / Funktion 3 / 0 / 0 Geräte ID 11AB-4353 Subsystem ID 152D-0769 Geräteklasse 0200 (Ethernet Controller) Revision 14 [ Mobile Intel(R) 965 Express Chipset Family [NoDB] ] Geräteeigenschaften: Gerätebeschreibung Mobile Intel(R) 965 Express Chipset Family [NoDB] Bustyp PCI Bus / Gerät / Funktion 0 / 2 / 0 Geräte ID 8086-2A02 Subsystem ID 152D-0769 Geräteklasse 0300 (VGA Display Controller) Revision 03 [ Mobile Intel(R) PM965/GM965/GL960 Express Processor to DRAM Controller - 2A00 [NoDB] ] Geräteeigenschaften: Gerätebeschreibung Mobile Intel(R) PM965/GM965/GL960 Express Processor to DRAM Controller - 2A00 [NoDB] Bustyp PCI Bus / Gerät / Funktion 0 / 0 / 0 Geräte ID 8086-2A00 Subsystem ID 0000-0000 Geräteklasse 0600 (Host/PCI Bridge) Revision 03 Link to comment https://www.insanelymac.com/forum/topic/153012-installation-idenneb-1055-mit-abpaasung-schl%C3%A4gt-fehl/ Share on other sites More sharing options...
Recommended Posts